Improvements to Road in Kappagallu Road 2nd Cross,Development of Walking Track and Electrification in Gandhi Nagar,Ballari City.

Improvements to Road in Kappagallu Road 2nd Cross,Development of Walking Track and Electrification in Gandhi Nagar,Ballari City.

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

CHAPTER - 4 SUB-BASES, BASES ( NON- BITUMINOUS) AND SHOULDERS Construction of Granular Sub-Base of required grading as

per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0....

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface.

Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.0 per cent by weigh...

Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 percent of mix and filler, tra...

CHAPTER - 8 TRAFFIC SIGNS, MARKINGS & OTHER ROAD PPURTENANCES Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of...

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

CHAPTER 2 CONCRETE WORKS Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and f...

Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust,...

9 MTR decorative curve street light pole With Top :75mm ,Bottom :190mm of 3mm pole thickness having two arm brackets fixed to it with one side facing to road and another to the footpath side for led s...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body foroptimalthermaldissipation.Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbon...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body foroptimalthermaldissipation.Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbon...

Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS -13947. 40 A

Supplying and fixing Moulded Case Circuit Breaker(MCCB)over theexisting wood/panel board using necessary screws, bolts, nuts, necessary phase separators,handle and wiring complete.Protection of Overlo...

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.and M.S.Flat.with bolts,washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint.

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper withlow conductor confirming to IS 8130 1984 and (Virgin) PVC insulation sheathed suitable for worki...

Supplying and fixing Microprocessor based Electronic timer (without contactor,DinMountingusingnecessarybolts,nutsandwashersetc.,.)3120sec setting.

Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped wit...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicatorON/OFF,energycross-3 with Short circuitbreaking capacity...

supplying of 1.1 kv , LT UG, cable having alluminium conductor PVC insulted, extruded inner sheated, galvanised , steel strip ( except 2cX 10 sq. mm wire armoured) conferming to IS-3975: 1990(No of st...

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stone were pipe/on wall/ on pole as required.

Digging of trench of 0.6m deep x 0.50 m wide refilling the trench to the required ground level and consolidating etc complete as per civil SR KSRB I-2, P-7) insoll ( Hard)

providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.

Open conduit system supplying heavy guage PVC conduite pipe 40mm dia 2.5mm thick confirming to IS 2509 with suitalb size bends , junction boxes adhesive paste etc and fixing using inverted wood plugs ...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. (PWD Electrical SR 2019-20, P.No.43, I.No.6.17.8)

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63A.

Electrificatin and service wire and deposit charges