Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.4 LAccepted-AOC NO 4 AC 114 EAST OF NGEF OPP THE KARNATAKA STATE APEX CO OPERATIVE BANK KASTURI NAGAR BANGALORE 560043 | BANGALORE | BANGALORE | KARNATAKA | 560043 | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹29.9 L+₹96,010 (3.32%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹32.6 L+₹3.7 L (12.9%)Rejected-Finance 18 KUSHAL LAYOUT 1ST CROSS KAGGADASAPURA CV RAMAN NAGAR POST BENGALURU 560093 | BENGALURU | BENGALURU URBAN | KARNATAKA | 560093 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹34.7 L+₹5.8 L (20.0%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | Rejected-Technical SITE NO 29 30 1ST CROSS NAGAPPA REDDY LAYOUT KAGGADASPURA CV RAMAN NAGAR BANGALORE 560093 | BENGALURU URBAN | KARNATAKA | 560093 | - | Rejected-Technical FIRM BEING ONE CLASS BELOW ELIGIBLE CLASS, FAILED TO UPLOAD REQUISITE DOCUMENTS |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
4 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER I R nd D WEST BANGALORE
GARRISON ENGINEER I R nd D WEST BANGALORE, DRDO COMPLEX, CV RAMAN NAGAR
REPAIRS TO ROLLING SHUTTERS COLLAPSIBLE GATES JOINERY GRILLS ALUMINIUM DOORS WINDOWS AND PARTITIONS AND CONNECTED WORKS UNDER AGE B R I R an D WEST BENGALURU
2023_MES_606791_1
GE(I)/R ND D/BAN/TOKEN/65 OF 2023-24 8218/E8
Open Tender
Civil Works
Item Rate
270 days
GARRISON ENGINEER I R nd D WEST BANGALORE
CLASS AND CATEGORY AS PER NIT
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER I R nd D WEST BANGALORE
₹60,000
5 Feb 2024
30 Jun 2023
11 Sept 2023
1 Jul 2023
4 Sept 2023
21 Aug 2023
1 Jul 2023 - 15 Jul 2023
Amount
Taking down chowkat or frames with shutters (without taking off shutters from frame) n. exc 1.50 sqm each and removing from site all as specified and directed.
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each all as specified and directed.
Dismantling structural steel work including doors, gates, railings etc but excluding framed truss etc complete all as specified and directed.
Dismantling of partition / windows of any size and any description complete all as specified and directed.
Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed.
Taking down old steel windows of any description and removing to store etc complete all as specified and directed.
Dismantling of ceiling board /Wall panelling of any thickness and of any description including cover fillets complete all as specifed and directed.
Dismantling plain corrugated steel sheeting any gauage thick ness including Nainital and similar pattern complete all as specifed and directed.
Demolition of brick work or stone/ boulder masonry, PCC block masonry built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to outside MD land complete all as specified and directed.
Taking down cement plaster on brick or stone wall etc incl raking out joints hacking for key scrubbing down with water complete all as specifed and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar 1:4 and finished to match with existing surface complete all as specified and directed.
S&F to frame factory made solid PVC door shutter 30mm thick (style) considering of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck in side with solvent cement for stiles and plain colour PVC sheets for top rails and bottom rail on side and on gap insert for top rail and bottom rail panelling of plain colour PVC shutter to be fitted in MS frame welded/sealed to the stile, rails with suitable PVC sheet beading and jointed to gether with solvent cement complete all as specified and directed..
S&F for 40 mm thick flush shutters, solid core construction, with block board core & plywood face panels, two faces covered with decorative face veneer with lipping / frame to match complete all as specified and directed.
S&F for 35 mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial panel on both sides complete all as specified and directed.
S&F for plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm thick B.W.P commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated etc complete all as specified and directed.
S&F for 35mm thick IInd class hardwood glazed and skeleton shutters open rebated and prepared to receive gauze (without sash bars)edges of framing plain, chamfered or round fitted with cut and mitred beads for securing wire gauze sizes of members of shutters all specified and directed.
S&F in repairs for 18 mm thick block board grade 2 quality interior grade, commercial type,in cub board shutters / shelves complete all as specified and directed.
S&F for stainless steel butt hinges medium weight of size 100 mm complete all as specified and directed.
S&F for mild steel butt hinges medium weight of size 100 mm complete all as specified and directed.
S&F for aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.
S&F for aluminium anodised cast type handles 150mm long complete all as specified and directed.
S&F for aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long complete all as specified and directed.
S&F for door stopper of rubber and stainless steel body, 100 mm size complete all as specified and directed.
S&F for anodised aluminum section for making doors, windows(side hung/sliding), partition wall, shutters etc including styles & rails with standard anodized aluminum section, with one or more rebates including aluminium snap beading complete all as specified and directed (Glazing, rubber beading,hinges etc shall be measured and paid separately)
M&L for rubber beading for fixing glass panes in aluminium frame work complete all as specified and as directed.
S&F for powder coated aluminium window and ventilator shutters, side hung / sliding type without sash bar, aluminium section weighing not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.), hinges type B-21 100 mm long (2 Nos.), suitable handle (1 No.) complete all as specified and directed.
S&F in repairs for 7 mm thick aluminium grill of make "Deco grill" and DG - 104 model or any other equivalent approved make fitted in to suitable Aluminium channel and fixed to windows/ ventilators including channel complete all as approved and directed.
M&L for 12 mm thickToughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required ,including one pivot per shutter and one lock per door including all necessary stainless steel fittings and fixture as required complete all as per directed.
S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.
S&F in repairs for Aluminium (Die cast) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and directed.
S&F for Steel windows with side hung shutters including projecting with box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F for Steel windows with side hung shutters including projecting with box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and directed.
S&F for 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified and directed.
S&F for 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane all as specified and directed.
S&F for 5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane fixed in aluminium frame complete all as specified and directed
M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber/ aluminium frame work in cup board shutters / aluminium partions etc..complete all as specified and directed.
S&F for stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples etc complete all as specified and directed.
S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and directed
M&L for pre-cast cement concrete block masonary 1:3:6 type C-1 (Using 20 mm graded stone agg) with solid block exc 10 cm in width and setting in CM 1:6 etc complete all as specifed and directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) etc complete all as specified and directed.
S&F for collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top & bottom runners, brass handles etc., as specified, erected in position & securing runners with holdfasts & brackets, complete
Servicing of collapsible steel gates, greesing, replacement of parts if required like rollers, handles, braces screws including straightening of flats in bent if any and making good for operable and a coat of paint complete all as specified and directed.
Taking down steel rolling shutters of any area and any description including one coat of Synthetic enamel paint, top cover with all parts such as shaft, spring, ball bearing, drum, CI pulley complete from brackets, channel etc greasing and replacing worn out parts as directed by Engineer-in-Charge and re-fixing the same after realigning the shaft/guide channel, welding drum cage, servicing the components for smooth functioning complete all as specified and directed. Note: Parts replaced will be measured and paid seperately
Supply only Hood cover
Supply only safety lever locks mild steel with 4 leavers for rolling shutters
Supply only ball bearing
Supply only anchoring rod
Supply only channels / guide rails
Supply only 1.25mm thick laths
S&F for steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp & staple & one shop coat of primer; erected in position as indicated, complete; push pull or manual type thickness of laths 1.25 mm etc complete all as specified and directed.
S&F for safety lever locks mild steel with 4 leavers for rolling shutters
S&F for ball bearing for rolling shutters
Servicing of aluminium sliding / Side hung shutters of any type including renewal of worn out parts like rubber beading( of weight min 1 kg per shutter), rollers, handles, hinges, locks, etc including necessary form work if required(upto 6M height) complete all as specified and directed.
Servicing of aluminium sliding / Side hung shutters of any type including renewal of worn out parts like rubber beading( of weight min 1 kg per shutter), rollers, handles, hinges, locks, etc including necessary form work if required (exceeding 6.0 m height) complete all as specified and directed.
Re securing glass of any description in existing metal frames, glazed with putty / beads including removing loose / decayed putty / beads, painting / oiling one coat on rebates, grooves, re puttying and painting / oiling puttied surfaces to match existing work ( New length of frame re puttied shall be measured )complete all as specified and directed.
M&L for welding in repairs to steel windows / doors exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded n. exc 6mm complete all as specified and directed.
M&L for false ceiling at any height using integral densified calcium silicate, reinforced with fibre and natural filler false ceiling tiles of size 595 mm x 595 mm of approved texture, design and patterns having NRC (Noise reduction co-efficient) of minimum 0.5 as per IS 8225 : 1987, Light reflectance of minmum 85%, non-combustible as per BS : 476 (Part - 4), fire performane as per BS : 476 (Part 6 & 7), humidity resistance of 100%, thermal conductivity < 0.05 W/m K as per ASTM 518 : 1991, fixed in true horizontal level, suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanised @ 120 grams per square metre on both sides), comprising of main - T runner of size 24 mm x 38 mm of length 3 m, cross - T of size 24 mm x 32 mm of length 600 mm to form grid module of size 600 mm x 600 mm, Grid suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per square metre) i.e., 50 mm long, 8 mm outer diamter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85 mm x 25 mm x 25 mm x 2 mm. Galvanized iron perimiter wall angle of size 24 mm x 24 mm x 0.4 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre, 40 mm long dry wall stainless steel screws complete all as specified and directed including taking down old false ceiling and grid. Note : Ceiling Tile shall be of 15 mm thick densified tegular edged light weight calcium silicate of (Make Aerolite or techno commercial equivalent)
S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
S&F for Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S&F for Venetian blinds, vertical type, 100 mm wide with polyester fabric of approved colour and pattern with aluminum fittings, and top rail and nylon buttons / loops etc., fixed cuttings and alteration if necessary wherever AC / coolers exists including dismantling of old unserviceable venetian blinds, complete all as specified and directed.
S&F for MS framed work of steel sections for fixing of cladding any type,cut to shape,drilled and countersunk for screw,including bending and welding angles,including necessary MS bolt and nuts for fixing,confirming to Fe 290 Gde-E-165 including necessary scaffolding complete all as specified and directed.
S&F for fixing,3mm thick coloured ACP(aluminium composite panel) sheet of make as per approved by GE,for cladding fixed to MS frame work including filling joints as per manufacturers and instruction of Enginieer-in-Charge,including carrying out the work upto 15metre height including necessary scafolding etc complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.
M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces exc 10 cm in width or girth complete all as specified and directed.
M&L for cleaning and preparation of old wooden surfaces of any description over 10cm width or girth and applying french polishing including wood filler with one or more coats complete all as specified and directed.
M&L for cleaning and preparation of new wooden surfaces of any description over 10cm width or girth and applying french polishing including wood filler with one or more coats complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc. 10 cm in width or girth over a coat of red oxide zince chrome primer complete all as specified and directed.
M&L for preparation of old painted steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls etc brooming down with steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading etc & greasy spouts including concrete pilasters etc. and applying one coat of oil bound distemper on walls complete all as specified and directed
M&L for preparation of old on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described and applying one coat of Plastic emulsion paint complete all as specified and directed.
Solar Electricals and Electronics
TECKXPERT ENTERPRISES
TANCARE HYGIENE AND HEALTH CARE
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .