Repair to certain B/R works for MES Installations, repairs to sanitary fittings, wall and floor set and connected works at AF stn Deolali.

Amount

Demolition of cement concrete in ground floors and pavings nexc 15 cm thick below or above ground level all as directed by Engineer-in-Charge.

Demolition of any description, in any position and any thickness not otherwise specifically provided all as specified and directed.

M & L for hardcore (Broken stone or boulders-granite/basalt ) of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface all as specified and directed.

M&L for 100 mm thick cement concrete type B-2, 1:2:4 (using 40mm graded aggregates) as in path/PCC road/hardstanding and PCC should be laid in alternate ways and the area of one panel should not be exc 10 Sqm/each all as specified and directed by Engineer-in-charge.

M & L for finishing the surface of concrete roads/paths/hardstanding by brooming all as specified and directed by Engineer-in-Charge.

M&L for providing, 75mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in footpath all as specified and directed by Engineer-in-Charge.

M&L 75 mm thick PCC type C-2 , 1:3:6 (using 40mm graded stone aggregates) as in plinth protection and surface to be finished without using extra cement and the PCC should be laid in alternate ways after every two metres and cut a groove as per direction of Engineer-in-Charge.

M &L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A'.

M & L for 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A'. Thickness of slab 100mm

M & L 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base flooring under floor all as specified and directed by Engineer-in-Charge.

M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade all as specified and directed by Engineer-in-Charge.

M & L for sand filling under floors or in foundations including watering and consolidation as in levelling coarse for fixing of interlocking tiles all as specified and directed by Engineer-in-Charge.

Dismantling of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar all as directed by Engineer-in-Charge.

M&L for 75 mm thick sub base in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) all as specified and directed.

M&L Chequered cement concrete tiles rubber moulded 25cm x 25cm x 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6 all as specified and directed.

M & L for plain/reinforced cement concrete Type B-1, 1:2:4 (using 20 mm graded granite stone aggregate) cast in situ in copings, bed plates and the like including weathering, slightly rounded or chamfered angles & throating and including use of form work all as specified and directed by Engineer-in-Charge..

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises exc 500 M all as directed by Engineer-in-Charge.

M & L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) as in toping /levelling layer for laiying of tiles all as specified and directed by Engineer-in-Charge.

M & L for coloured joint free non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm in floors etc. set and and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) finished even and rough to receive the top layer all as specified and directed..

M & L for coloured Glazed ceramic tiles in vertical surface 300x 450x 7 mm/ 300X 600X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with pigment to match the colour of tiles over and including 10 mm thick rendering/bedding layer in CM 1:4 on brick work /stone masonary or concrete surfaces all as directed by Engineer-in-Charge.

Taking down cement plaster on brick/stone walls/ concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc all as directed.

M & L for rendering 15 mm thick on stone masonry surfaces or other than fair faces of brick work of walls in cement mortar 1:4 finished even and smooth all as specified and directed.

M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth all as specified and directed.

M&L for rendering 5mm thick plaster on fair faces of brick work or concrete surfaces in CM 1:3 finished even and smooth on ceiling as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of alkali resistant priming paints or JK wall Care Putty of 2mm thick suitable for external surfaces all as specified and directed by Engineer-in-Charge.

M & L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion after chalk whiting on plastered surfaces or one coat of JK wall care putty of 2mm thick all as specified and directed by Engineer-in-Charge.

M & L for preparation of newly plastered surface and applying three coats white wash on ceiling all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment of walls by steel wire brushing, preparation of surfaces and applying two coats of distemper oil emulsion after chalk whiting or JK wall care putty 2mm thick over the walls all as specified and directed by Engineer-in-Charge.

M & L for preparation of old surfaces of walls and applying one coat of oil emulsion distemper all as specified and directed by Engineer-in-Charge..

Complete removal of existing treatment of walls by steel wire brushing, preparation and applying two coats of cement base paint over one coat of alkali resistant priming paints or JK wall Care Putty of 2mm thick suitable for external surfaces all as specified and directed by Engineer-in-Charge.

M & L for preparation of old surfaces of walls and applying one coat of cement base paint all as specified and directed by Engineer-in-Charge..

Complete removal of existing treatment of ceiling by steel wire brushing, preparation of surfaces and applying three coats of white wash on ceiling all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment by steel wire brushing and applying two coat of weather coat paint APEX over one coat of alkali resistant priming paints or JK wall Care Putty of 2mm thick suitable for external surface all as specified and directed by Engineer-in-Charge.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each.

All as per item No. 34 here-in-before but exc 1.5 sqm but not exc 4 Sqm each

S & F 105x60mm pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified and directed.

M & L for plain cement concrete type B0, 1:2:4 (using 12.5 mm graded granite stone aggregate) cast in situ in filling to steel frames including use of form work all as directed by Engineer-in-Charge.

M&L 35 mm thick second class hard wood plain framed factory made panelled shutters( two panels) with 10 mm bison panel or 12 mm thick veneered particle board with commercial face veneers on both side as panel inserts, styles & rails shall be of second class hard wood timber generally conforming to IS-1003(Part-I) (Door shutters) Kiln seasoned and chemically pressure treated all as directed by Engineer-in-Charge.

S&F steel windows with side hung shutters including box type hinge of size 75 mm with 'z' type steel handle and steel peg stay and 02 No.100 mm size MS tower bolts welded on each shutter complete with glazing bars, dovetailed or welded all as specified and directed.

S&F window guard bars welded in steel window/fixed independently in wooden frame conforming toFe-290 Gde E-165

Hacking out old broken glass panes (any thickness size quality or description ) from wooden frame fixed with oil putty or beads area not exc 0.5 Sqm each all as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty not exc 0.5 sqm in each pane.

M & L preparation of new wooden surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M&L preparation of new steel surfaces of any desciption over 10 cm in width or girth not other wise descibed and applying two coats of synthetic enamel paint over a coat of red oxide all as specified and directed.

S & F 150 mm size aluminium anodised barrel tower bolt of extruded section .

S & F 250 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) & fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S & F aluminum anodized handle cast type 150mm size

S & F in repairs 140mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring all as specified and directed.

S & F in repairs 2mm thick PVC tiles/sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors all as specified and directed by Engineer-in-Charge. Note : Rates include for all cutting and waste and work in all positions as well as in narrow widths.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. all as directed by Engineer-in-Charge.

M & L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in 1:4 cement mortar all as specified and as directed.

All as per item No. 51 here-in-before but except bricks.

M & L cement concrete 1 : 3 : 6 type C2 (using 40 mm graded stone aggregate) as foundation filling mass concrete all as specified and as directed.

M & L cement concrete 1 : 2 : 4 type B1 (using 20 mm graded stone aggregate) as surface channel and drains all as specified and as directed.

M & L for rendering 15 mm thick in CM 1 : 4 on fair faces of brickwork or concrete surface finishing the surface even and smooth without using extra cement all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors (below or above ground level ) not exceeding 15 cm thickness and including removing demolised PCC form site exc 500 mtr but n exc 1500 Mtr depositing where directed.

M & L for coloured joint free non skid ceramic tiles 7-8 mm thick (square/rectangular), area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) finished even and rough to receive the top layer.

All as per item No. 57 here-in-before but vertical surfaces over 10mm thick rendering in CM 1:4 all as specified and directed.

M & L Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm screed bed or bedding layer CM 1 : 6 all as specified and directed.

M & L for coloured joint free glazed ceramic tiles 450 x 300 x 6 to 7 mm thick on vertical surfaces such as skirting/ dado , set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 10mm thick rendering/bedding layer in CM 1:4 on brick work /stone masonary or concrete surfaces all as specified and directed.

M & L glazed coloured (digital/printed/design) ceramic tiles in vertical surface 450 mm x 300 mm x 7mm thick or 450 mm x 300 mm x 7mm thick and set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M & L for coloured (light shade) vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tiles including 15mm thick screed bed or bedding layer CM 1 : 6 all as specified and directed by Engineer-in-Charge.

M & L for coloured (dark shade) vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tiles including 15mm thick screed bed or bedding layer CM 1 : 6 all as specified and directed by Engineer-in-Charge.

M & L for coloured (light shade) vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles including 10 mm thick rendering CM 1 : 4 all as specified and directed.

M&L 25 mm thick PCC ,type B-1(20 mm graded aggregate) in toping layer of flooring complete all as specified and directed.

M&L12 mm thick Endura tiles (Square or rectangular) area of each tile exc 0.08 Sqm but n exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) complete all as specified and directed.

M&L Chequered cement concrete tiles rubber moulded 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6 all as specified and directed.

M&L cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and as directed.

M & L for providing cement concrete Type B-0 (1:2:4), 12.5 mm graded aggregate as in in bed places, coping , hold fast,benching etc complete all as spd and directed by Engineer-in-Charge..

M & L for providing machine cut kota stone slab mirror finished flooring 20-25mm thick over cement screed base/rendering laid and jointed as in floor/steps (treads/risers/dados etc ) with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15mm thick screed bed in CM 1:6 all as specified and directed.

20-25 mm thick Kota stone tiles (Pre-mirror polished), in riser of steps, skirting,dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles including rounding the edges of kota stone over and including 10mm thick backing coat in cement mortar (1:4), surfaces finished even and rough to receive tiles, including taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L granite (of any type) work ( table rubbed & polished), 18 to 20mm thick, in steps, jambs, pillars, window-cill, cooking platforms & like in cement mortar (1:4) including polishing of chamfered edges and pointing in white cement using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM (1:6) necessary cutting, notching etc for sink all as specified & directed..

M&L Machine cut cudappah stone slab 20mm to 25 thick, over and including cement screed bed in CM 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete necessary cutting, notching etc for sink all as directed by Engineer-in-Charge.

Chamfer, splays, or arris in facework of cudappah stone exc 15mm wide but n exc 50mm wide all as directed.

M&L for drilling holes for pipes etc in cadappa including RCC slab n exc 40mm dia and n exc 100 mm depth all as directed.

S & F in repair stainless steel kitchen plate rack of 1 mm thick of size not less than 900 mm x 750 mm fixed with stainless steel screw all as specified and directed by Engr-in-charge. (Make: Prayag, Nilkamal, Nirali)

S & F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440 mm white with `P' or `S' trap, front or back inlet and integral foot rests including connection to trap, to flushing pipe etc. complete including PCC for making good to floor etc. all as directed.

S & F in repairs 10 liters PVC valveless syphonic action type flushing cistern high/low level, white complete with inlet, ball valve, float and handle including brackets and telescopic down pipes and joint with WC complete.

S & F PVC connection 15 mm bore size with PTMT nuts and PVC washers of length 450 mm.

Dismantling water tank of capacity exc. 500 Litres but n.exc.1000 Litres, open or closed all as directed.

S & F 1000 Litres capacity three layered rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I. and as directed.

S & F ball brass valves, high pressure, with polythene float and fly nut for 20mm bore dia pipe complete screwed for iron pipe or brass ferrule and fixed.

Taking up or down steel water tubing and connecting including cleaning for refixing or removal to stores for 20mm bore. complete all as specified and as directed.

Refixing 20mm dia old steel water tubing and connecting in new or old position with S&F all fitting complete all as specified and as directed.

S&F GI tubes medium grade 20mm bore fixed complete to wall or laid in floor. complete all as specified and as directed.

Taking up or down GI tubing 15 mm bore and connections from walls and ceiling or laid in floor including cleaning for refixing all as directed.

Refixing old steel tubing 15 mm bore and connections in new or old position (Walls, ceiling, floors, etc.) with S&F all fitting complete all as specified and as directed.

S & F GI tubing 15 mm bore medium grade with all fittings and fixed complete to wall , ceiling or laid in floor all as directed.

Cutting chases with diamond cutter , pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edge of landings, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth in stone/brick/concrete walls all as specified and directed.

S & F in repair 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed.

S & F in repair 15 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed.

S & F in repair 15 mm bore fancy type chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F in repairs stop cocks 15 mm bore, chromium plated , fancy type screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions .

S & F in repairs Chromium plated shower rose 75 mm dia with CP arms with swivel joints, including fixing to steel pipe or union.

S & F in repairs wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste coupling fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe as specified.

S & F in repairs 15 mm bore Fancy type pillar taps, cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S & F low density polythelene pipes 50 mm bore fixed complete to walls, ceiling or in floor.

M&L for cutting holes into or through brick/stone walls built in cement mortar, superficial area n exc150 and making good in cement mortar 1:3 or PCC 1:2:4: type B-1 as required.

S & F in repair sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including waste coupling with pipe, bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495 mm x 420mm bowl size 410mmx330mmx160mm all as directed.

S & F in repairs brass chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges all as directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with fixing and including chromium plated bracket, guard and railing 55/56cm long complete. all as directed.

S&F aluminium Hat pegs, solid body, 125mm to 175 mm all as directed.

S & F in repair PVC (SWR) floor trap of 75 mm outlet plain with grating including jointing with solvent cement all as directed.

M&L box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. all as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.

Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips all as directed.

3 mm thick Figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane all as specified and as directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or stainless steel wire staples all as specified & directed.

S&F 100 mm long stainless steel ,Butt hinges medium weight, cold rolled all as specified and directed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

Demolition of reinforced cement concrete (Reinforcement cut as required to facililate demolition)) in ground floors (below or above ground level ) not exceeding 15 cm thickness all as directed.

M & L brick work with fly ash brick straight or curved on plan exceeding 6 metres mean radius built in cement mortar 1:4 all as specified and as directed.

M & L brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified & diretced.

Mild steel TMT 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and as directed.

M & L for reinforced cement concrete type B-1, 1:2:4 (using 20 mm graded granite stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.

Use and waste of fair finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs, cooking platform and similar work not exc. 200 mm thick all as specified and as directed.

Use and waste of rough finished form work to edge of concrete slabs, breaks in floors, etc exc 5 cm but not exc. 10 cm wide all as specified and as directed.

M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth all as specified and directed.

Demolition of cement concrete other than ground floors and in sunken portion including WC, IWC ,floors traps etc. all as directed.

M & L rendering 15 mm thick on brickwork or concrete surfaces in CM 1:3 with using water proofing compound. Note:- Water proofing compound shall be measured and paid separately at supply rate only.

Material and labour for PCC 1:5:10 type E2 (using 40mm graded stone aggregate) as in filling of sunken slab all as specified and as directed.

M & L for plain cement concrete type D-2, 1:4:8 (using 40 mm graded granite stone aggregate) in flooring, filling and mass concrete.

Supply only liquid water proofing compound

Taking down rainwater pipes (any size of pattern), including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to store all as specified and directed.

S & F 110mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors or trenches including digging and making good as per existing.

S & F 75mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors or trenches including digging and making good as per existing.

S & F PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement all as directed.

S & F PVC (SWR) floor trap 100 mm bore plain with grating including jointing with solvent cement all as directed.

S & F PVC (SWR) bends 110 mm dia with access door all as directed.

S & F PVC (SWR) bends 75 mm dia with access door all as directed.

S & F PVC (SWR) bends 110 mm dia all as directed.

S & F PVC (SWR) bends 75 mm dia all as directed.

S & F PVC (SWR) vent cowl 110 mm dia all as directed.

S & F PVC (SWR) vent cowl 75 mm dia all as directed.

M/S KANNANS

N.U. MIRZA