Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.8 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹18.5 L+₹76,856.93 (4.33%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST TENDERER. | |
| 3 | L3₹20.9 L+₹3.1 L (17.7%)Rejected-Finance SHOP NO 259 LOHOGAON ROAD KALWAD KHANDVE NAGAR PUNE 411032 | PUNE | MAHARASHTRA | 411032 | L3 | Rejected-Finance NOT THE LOWEST TENDERER. | |
| 4 | L4₹21.7 L+₹3.9 L (22.1%)Rejected-Finance RADHA NIKUNJ L 2 SOUTH CIVIL LINES ROORKEE HARIDWAR UTTARAKHAND 247667 | ROORKEE | HARIDWAR | UTTARAKHAND | 247667 | L4 | Rejected-Finance NOT THE LOWEST TENDERER. | |
| 5 | L5₹23.1 L+₹5.3 L (30.0%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST TENDERER. |
| Sl No | Description | Qty | Unit | LOKMANYA ENTERPRISES L7 | PURVA ELECTRICALS AND ENGINEERS L1 | Rama Electricals L3 | M/s Harshal Traders L2 | SHREE VAIBHAV ELECTRICALS L5 | EX SOLDIERS MECHANICAL WORKS L4 | Rohit Enterprises L6 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply & Installation of Galvanized steel high mast lighting system of 16 meter (Moterised) in two section, 3, 4 mm section thickness, top dia 150 mm, bottom dia 410 mm, with 2/3 wire rope Moterised system and its motorised accessories, Aviation lights , Lightining Arrester and its accessories, System shall suitable for loading 08 Nos, LED flood lights of capacity 300 Watt and Anchor plate 460 PCD 8 Holes, Template 460 PCD 8 Hole, Foundation Bolt M30x850mm Straight -08 Nos, complete all as specified and directed by Engr in Charge.
Note :- (i) The rates are inclusive of High mast control panel (timer panel with suitable size/type/rating of MCB's , contactors, analog type timers, relays etc) for operation of High mast lights, Aviation light & Winch motor assembly and complete control wiring from Timer panel to highmast lights and winch motor as per the OEM recommendations.
(ii) The rates are inclusive of excavation work and foundation work of High mast pole as recommended by the OEM of the High Mast light.
(iii) The rates are inclusive of any type of T&P involved in fixing of the highmast Lights.
(iv) The cost of luminaries is to be paid under relevent item of the sch.
(v) The cost of EPR travelling cable size of 2.5 Sqmm 5 core of required length is inclusive of the quotated rate.
Make:- CROMPTON/ BAJAJ/ WIPRO | 3 | Each | 4,15,486 ₹12,46,458 | 3,40,000 ₹10,20,000 | 3,96,000 ₹11,88,000 | 2,82,000 ₹8,46,000 Lowest | 3,75,000 ₹11,25,000 | 3,95,000 ₹11,85,000 | 3,41,000 ₹10,23,000 |
| 2.00 | Supply and fix LED Flood light 300 watts made up of pressure die cast aluminium housing high power LED's potted driver, lens, with efficacy of 120lm/W & toughened glass with IP 66 protection complete all as specified and directed.
Make:Bajaj / Philips / Havells
Note :- The rates are inclusive of fixing charges of Flood lights to the circular ring of the High mast pole. | 24 | Each | 13,542 ₹3,25,008 | 10,200 ₹2,44,800 | 13,000 ₹3,12,000 | 13,300 ₹3,19,200 | 15,000 ₹3,60,000 | 9,300 ₹2,23,200 Lowest | 14,000 ₹3,36,000 |
| 3.00 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specified and directed by Engr - in - Charge. | 100 | Rm | 350 ₹35,000 | 262 ₹26,200 Lowest | 308 ₹30,800 | 320 ₹32,000 | 450 ₹45,000 | 315 ₹31,500 | 350 ₹35,000 |
| 3.01 | All as per irtem no 3 above but of size 25 Sqmm 3.5 Core. | 795 | RM | 293 ₹2,32,935 | 195 ₹1,55,025 Lowest | 254 ₹2,01,930 | 270 ₹2,14,650 | 275 ₹2,18,625 | 255 ₹2,02,725 | 310 ₹2,46,450 |
| 4.00 | Material and Labour for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground vertically (earth pit not less than 2.25 mtr deep below ground level) with top edge of the earth plate not less than 1.5 mtr below ground level , connected to 32mm x 6 mm GI strip as earthling lead by means of blots and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel, wire gauge. CI cover with frame , 50 MM dia GI pipe light grade for protection of wire/strip etc including necessary excavation in any type of strata , returning filling removal of soil outside MD land, filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point complete all as specified and directed and testing on completion.
(@4 Earthings to each high mast pole, LA and Timer panel =4X3=12 Nos)) and 06 nos for Feeder panel (Total -18 earthings) | 18 | Each job | 6,925 ₹1,24,650 | 4,200 ₹75,600 Lowest | 5,000 ₹90,000 | 5,400 ₹97,200 | 6,000 ₹1,08,000 | 7,500 ₹1,35,000 | 8,000 ₹1,44,000 |
| 5.00 | Supply, install testing and commissioning outdoor type LT panel board floor mounted, self supporting compartmentalised design of suitable size but not less then 0.8 Mtr X 0.8 Mtr X 0.300 Mtr, Manufactured by CPRI Approved Manufacturer 440 V, 3 phase 4 wire system powder coating provided with suitable to make it dust/vermin proof. The panel shall be made with 3.15 mm thick CRCA sheet for outer shell and inner shell made out of 1.9 mm thick CRCA sheet,double door with front openable with locking arrangement, provision of threaded earthing stud at bottom, inner shell be compartmentalized, front openable single door system lockable. Inner shell completely vermin proof and to accommodate incoming/outgoing MCCBs, MCBs, motor starters and TPN aluminium bus and extension links. Aluminium bus bar of capacity 200 Amps- 3 Nos and 01 Nos for neutral of capacity 100 Amps, including neutral duly insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size/rating of epoxy resin insulator all housed in suitable bus bar chamber. All control panel wiring shall be with 2.5 sqmm multi stranded copper conductors for power wiring between bus bar to each incoming and out going MCCB with adequate size of single core multistranded copper conductor cable of adequate size and shall be properly bunched, tied, ferrulled for proper indentification and crimped with adequate size of lugs and provision and fixing of Voltmeter,Ammeter with built in selector switch, CTs of suitable ratio, and pilot indication lamps complete along with provision of necessary cable entry/exit boxes for all incoming and out going cables with suitable size of cable glands etc. Computer cut shelf adhesive vinyl danger notice plate having conventional symbol of bone & skull be provided. The panel shall consists of following accessories:- | 3 | Nos | 38,471 ₹1,15,413 | 31,500 ₹94,500 Lowest | 40,000 ₹1,20,000 | 63,000 ₹1,89,000 | 75,000 ₹2,25,000 | 55,000 ₹1,65,000 | 81,000 ₹2,43,000 |
| 5.01Note : (i) Electrical connection from switchgear to bus bar shall be through copper strips of suitable size. (ii) The internal electrical connection for measuring instruments shall be through multi-stranded PVC insulated copper conductor cables of suitable size. (iii) The termination of incoming and outgoing cable into and from switchgear shall be through properly crimped aluminum lugs of suitable rating incommensurate with that of switchgear. (iv) Cable glands shall be provided for incoming & out going cables in panels. (v) The cost of fixing of the panel on suitable PCC (1:3:6) type C-1(using 20 mm graded black trap/basalt/granite stone aggregates) foundation as directed by Engineer-in-Charge is deemed to be included in the quoted rates by the contractor for the above item. (vi) The bottom of panel shall have minimum 60cm height from existing ground / floor level. | ||||||||||
| 5.02i) Incomer | ||||||||||
| 5.03a) MCCB four pole 25 KA rapturing capacity 63Amps Ics= 100% of Icu adjustable thermal magnetic setting including connection with bus bar - 01 Nos (as incomer) | ||||||||||
| 5.04ii) Out going | ||||||||||
Tender Value
Refer Docs
EMD Value
₹58,260
Closing Date
19 Jan 2026, 6:00 pmClosed
GE MH AND RH KHADKI
Military Engineer Services Garrison Engineer MH and Range Hills Range Hills Road Khadki, Pune 411003
PROVN OF HIGH MAST SECURITY LIGHT IN JCOs OR MD ACCN AT AUNDH MIL STN UNDER GE MH RH KHADKI
2025_MES_746302_1
8790/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE MH AND RH KHADKI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MH AND RH KHADKI
₹58,260
20 Feb 2026
27 Dec 2025
21 Jan 2026
27 Dec 2025
19 Jan 2026
12 Jan 2026
27 Dec 2025 - 19 Jan 2026
Supply & Installation of Galvanized steel high mast lighting system of 16 meter (Moterised) in two section, 3 mm section thickness, top dia 150 mm, bottom dia 340 mm, with 2/3 wire rope Moterised system and its motorised accessories, Aviation lights , Lightining Arrester and its accessories, System shall suitable for loading 08 Nos, LED flood lights of capacity 300 Watt and Anchor plate 460 PCD 8 Holes, Template 460 PCD 8 Hole, Foundation Bolt M30x850mm Straight -08 Nos, complete all as specified and directed by Engr in Charge. Note :- (i) The rates are inclusive of High mast control panel (timer panel with suitable size/type/rating of MCB's , contactors, analog type timers, relays etc) for operation of High mast lights, Aviation light & Winch motor assembly and complete control wiring from Timer panel to highmast lights and winch motor as per the OEM recommendations. (ii) The rates are inclusive of excavation work and foundation work of High mast pole as recommended by the OEM of the High Mast light. (iii) The rates are inclusive of any type of T&P involved in fixing of the highmast Lights. (iv) The cost of luminaries is to be paid under relevent item of the sch. Make:- CROMPTON/ BAJAJ/ WIPRO
Supply and fix LED Flood light 300 watts made up of pressure die cast aluminium housing high power LED's potted driver, lens, with efficacy of 120lm/W & toughened glass with IP 66 protection complete all as specified and directed. Make: Halonix/Philips/Havells Note :- The rates are inclusive of fixing charges of Flood lights to the circular ring of the High mast pole.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specified and directed by Engr - in - Charge.
All as per irtem no 3 above but of size 25 Sqmm 3.5 Core.
Material and Labour for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground vertically (earth pit not less than 2.25 mtr deep below ground level) with top edge of the earth plate not less than 1.5 mtr below ground level , connected to 32mm x 6 mm GI strip as earthling lead by means of blots and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel, wire gauge. CI cover with frame , 50 MM dia GI pipe light grade for protection of wire/strip etc including necessary excavation in any type of strata , returning filling removal of soil outside MD land, filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point complete all as specified and directed and testing on completion. (@4 Earthings to each high mast pole, LA and Timer panel =4X3=12 Nos)) and 06 nos for Feeder panel (Total -18 earthings)
Note : (i) Electrical connection from switchgear to bus bar shall be through copper strips of suitable size. (ii) The internal electrical connection for measuring instruments shall be through multi-stranded PVC insulated copper conductor cables of suitable size. (iii) The termination of incoming and outgoing cable into and from switchgear shall be through properly crimped aluminum lugs of suitable rating incommensurate with that of switchgear. (iv) Cable glands shall be provided for incoming & out going cables in panels. (v) The cost of fixing of the panel on suitable PCC (1:3:6) type C-1(using 20 mm graded black trap/basalt/granite stone aggregates) foundation as directed by Engineer-in-Charge is deemed to be included in the quoted rates by the contractor for the above item. (vi) The bottom of panel shall have minimum 60cm height from existing ground / floor level.
i) Incomer
a) MCCB four pole 25 KA rapturing capacity 63Amps Ics= 100% of Icu adjustable thermal magnetic setting including connection with bus bar - 01 Nos (as incomer)
ii) Out going
a) MCB TPN, 10KA, 40 Amps, - 02 Nos (for High mast light control panel - 01nos) & 01 Nos spare
b) MCB SP, "C' curve, 10KA, 32Amps, - 01 Nos (for existing street light panel)
e) LED type RYB phase indicator lamp with back up HRC fuse - 01 Set
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed.
Ditto item no 6 but in hard/dense soil.
Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed
Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed.
Material and Labour for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as specified and directed . Note - Punned thickness shall only be measured & paid .
Material and Labour for road cuttung / foot path and making good with PCC 1:3:6 TYPE C-2 (using 40 mm graded stone aggregate) of 150 mm width/depth complete all as specified and directed
Material and Labour for Brick " class B "protection for under ground cable complete all as specified and directed
Supply and laying GI tubes light grade, galvanized, 40 mm bore laid in trenches or under floor or fixed with poles/walls for protection of electric cable complete all as specified and directed
Ditto item no -13 but 80 mmm bore.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.13 MB
TENDER8790.pdf
Tender Documents • 0.88 MB
BOQ_835679.xls
BOQ • 1.20 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .