ROOF TREATMENT IN COMN COMPLEX OF HQ 101 AREA AT FCSR (BLDG NO LSM 71) AND PROVISION OF FOOTPATH WITH INTERLOCKING TILES FOOTPATH FROM BLDG NO 241 (JCOS CLUB) TO LM 43 (OR MD ACCN) AT FCSR AND ADDN/ALTN TO TOILET AT BLDG NO P 239 (OR LIVING ACCN) AT

Amount

B/R - I Taking down chowkhat or frames but with shutter (without taking off shutter from the frame) not exc 1.5 sqm each including make good complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with single piece extruded pvc profile both side prelam PVC sheet 'C' channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and 5mm thick both side prelam single piece extruded pvc profile for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelam 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and shown on drawing given in SSR Part II. The width of stiles & rails shall be in proportion to the width of the door shutter as given in SSR Part I complete all as specified and directed.

S&F pre laminated solid PVC Double Door Frame of size 50mm x 95mm made out of 5mm single side prelam single piece extruded pvc profile and edgs will be painted to match with prelam PVC sheet are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided through out the frame. The profile shall be mitre cut at two corners and joint by insrting 2 nos of 150mm long backets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing complete all as specified and directed.

S&F Extruded Aluminium alloy handles, fabricated type, anodised of size 150mm complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section and fixed of 200 mm length complete all as specified and directed.

S&F Satinless steel Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) for leveling the floor complete all as specified and directed.

M&L for Non skid light shade, joint free ceramic tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with screed bed or bedding layar of mortar 15mm thick for laying floor finisehes in CM 1:6 complete all as specified and directed.

M & L Glazed ceramic Coloured Tile 3502450x7mm/450x350x7 mm thick Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match and rendering 10mm thick on fair faces of brick work or concrete surface CM 1:4 screed, complete all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) mixed with water proofing compound with 5mm thick layer including finishing the surface even and smooth (without using extra cement) complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L for rendering 10mm thick in CM (1:6) in two coats (10mm and 5mm thick)on fair faces of brick or concrete surfaces including finishing even & smooth (without using extra cement) complete all as specified and directed

Supplied only integral WPC complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement paint over a coat of Priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of distemper oil emulsion over a coat of Priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) blwl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) as specified and as directed.

S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum wt 60gms)complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Urinal partitions slabs terminating about 40cm above floor line, fixed in repairs complete all as specified and directed.

S&F in repair Health faucet(ABS Body)mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair for grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580 X 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), water closet (squatt pattern) complete including provision of lime concrete bedding complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type flushing cistern, low level, white, 10 Ltr capacity with inlet, ball valve, float and handle including brackets with High or Low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever complete all as specified and directed.

S&F in repair Vitreous china wash , white, flat back, size 550 x 400 mm including brackets, and Wash basins, Vitreous China (flat back or angle back type) and size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, 32 mm waste coupling of PTMT (half or full threaded) (minimum wt 32mm- 45gms/ 40mm- 60 gms) complete all as specified and directed.

S&F in repair Bip tap,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, 15mm fancy type, chromium plated complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store for 15 mm bore of pipes complete all as specified and directed.

Taking up or down steel tubing and connection , including cleaning for refixing or removal to store for 20 mm bore of pipes complete all as specified and directed.

S&F GI tubes, 'medium grade' 15mm bore, galvanised, with all fitting and fixed complete to wall and ceilings or laid in floors complete all as specified and directed.

S&F GI tubes, 'medium grade' 20mm bore, galvanised, with all fitting and fixed complete to wall and ceilings or laid in floors complete all as specified and directed.

Refixing 15mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing 20mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

S&F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but with fancy type, chromium plated, 15 mm bore (Make : SONA or equivalent) complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in replacement of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity n. exc 1000 Ltrs incl dismantling water tank and removing removing to store of any capacity complete all as specified and directed.

S&F in repair ball brass valve of size 20mm, high pressure, with polyethylene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed including taking down old existing unserviceable gate valve of dia 20 mm complete all as specified and directed

S&F in repair PVC (SWR) bends, any radius, 110 mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) Pipes single socketed in any length with rubber ring joints fixed to walls with 110 mm bore complete all as specified and directed.

S&F in repair PVC(SWR) pipes single socketed, 75mm bore in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) reducer 110mm dia complete all as specified and as directed.

S&F in repair PVC (SWR) 110mm dia in junction single , (Single T) equal or unequal complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, grazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), Plastic water closet seat, black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging device, with wash down water closet (pedestal pattern), complete with flushing cistern and flushing pipe (exclusive of brackets), incl PVC valveless, syphonic action type, Flushing Cistern 10 LITRE capacity, Low Level, White, with Inlet, Ball Valve, Float and Handle, complete all as specified and as directed.

S&F vitreous China wash basin ,white, flat back, size 550x400mm including brackets and Vitreous china (flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe with pedastal complete all as specified and as directed

S & F in repairs CP Brass Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Brass CP 2-in-1 Bibcock with flange of make Jaguar Cat Part No:-ORP-10041PM OR equivalent in Marc/Cera/Parryware complete all as specified and directed.

S&F in repairs Brass CP shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware complete all as specified and directed.

S&F cutting chases, pinning in stone concrete block or slab walls making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

S&F for Low density polyethylene (Bore of pipe in 32mm) pipes of pressure rating 6 kgf/sq. cm complete all as specified and directed.

M&L for 18/20mm thk granite work ( table rubbed and polished)in steps, jambs, pillars, window- cills, cooking platforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete including dismantling the existing slab complete all as specified and directed.

Labour only for chamfer , splays or arris in facework not exc 15mm wide complete all as specified and directed.

Complete removal of existing treatment on old wall surfaces and applying two finishing coat of distemper oil emulsion over 1mm thick wall care putty on wall complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided described complete all as specified and directed.

M&L RCC type B1 (1:2:4) using 20mm graded stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L TMT bars 10 mm dia & over, cut to length, bend to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.90 mm dia on securing with clips complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of flat rough finished surfaces of concrete complete all as specified and directed.

M&L For PCC (1:2:4) type B1 ( 20mm graded aggregate) in roof kerbs or mud stops rounded or chameferd on edges complete all as specified and directed.

M&L for rendering 10 mm thick on roof top /padding in Cement mortar (1:4) finished the surface even and smooth (without using extra lime or cement) complete all as specified and as directed

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/sqm including cleaning surfaces etc complete all as specified and as directed

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric ( wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specifed and as directed

S&F 0.56mm thickness of plain Aluminium sheeting , Alloy 31000 H4 in ridges , hips , valley gutter , drip and straight flashing ( length and girth as fixed ) complete all as specified and directed.

M&L for preparation of old wall surafces and applying two finishing coat of distemper oil emulsion over 1mm of wall care putty on wallcomplete all as specified and directed.

Complete removal of existing treatment on old ceiling surfaces and applying two finishing coat of distemper oil emulsion over 1mm of wall care putty complete all as specified and directed.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde-E- 250) quality- A Fe complete all as specified and directed.

M&L painting to new or previously untreated surfaces of any description, over 10cm in width or girth, steel Sqm surfaces in two coats of synthetic emamel paint over a coat of red-oxide, zinc chrome primer not otherwise discribed complete all as specified and directed.

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.

M & L for hardcore of broken brickof gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified and directed.

M & L for 100mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) complete all as specified and directed.

M&L 60mm thick coloured, machine pressed precast conctete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006, M-35 grade with grey cement and pigment complete all as specified and directed.

M&L Sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed.

M & L for Precast cement concrete block masonry with solid blocks, type B1 1:2:4 (20mm graded aggregate) exc. 10 cm in width and setting in mortar 1:6, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and directed.

Removing excavated soil material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

E/M ITEMS Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. (Note :- Switch, socket and fan regulators to be measured and paid for separately) complete all as specified and directed.

Description all as per serial item No 2 above but 3 pin switch socket outlet 15 Amps, independent, with cable 4 sqmm size complete all as specified and directed.

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed.( Make- Havells/anchor/ Legrand.) complete all as specified and directed.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. (Make- Havells/anchor/ Legrand.) complete all as specified and directed.

M&L ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one .

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type, with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,Single door, sheet steel, enclosure powder coated 8 way with 200 Amps rated busbar with neutral link complete all as specified and directed.

Supply and fix MCB isolator DP, 240 Volts, 40 Amps capacity complete all as specified and directed.

Supply and fix MCB isolator SP, 240 volts, 40 Amps capacity complete all as specified and directed.

S & L wiring with two run single core 6 Sqmm alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine. (iii) Necessary plastering in the distrubed surface of wall and distempering/ white washing to match the existing colour shall be inclused in the unit rate quoted.

All as per Item No. 2 here-in-before but for one 3 pin socket outlet, 5 Amps on same board with other switches, with cables 1.5 Sq mm size, complete all as specified and directed.

All as per Item No. 2 here-in-before but for one bell/buzzer point controlled by 1 push botton on the same board with other switches or independent with cables 1.5 Sq. mm size, complete all as specified and directed.

All as per Item No. 2 here-in-before but for one bell/buzzer point controlled by 1 push botton on the same board with other switches or independent with cables 2.5 Sq. mm size, complete all as specified and directed.

Description all as per Srl item No.2 here in before but one 3 pin socket outlet, 5 Amps, independent, with cables 2.5 Sq. mm size on Independent board complete all as specified and directed.

M & L modular switch 1 way 6 A, 1 module with cover plate and frame 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

M & L modular bell push 6A 1 module with cover plate and frame 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A -2/3 pin combined 2 module with cover plate and frame 230/250 Volts, AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A/16A-2/3 pin combined 2 module with cover plate and frame 230/250 Volts, AC supply, ISI Marked, with cover plate complete all as specified and directed.

M & L modular switch 1way 16A, 1 module with cover plate and frame 230/250 Volts, AC supply, ISI Marked, with cover plate complete all as specified and directed.

M & L buzzer, ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. (Make- Havells/anchor/ Legrand.) complete all as specified and directed.

S & F LED Spot Light fitting 1 x 9W/ 1 x 10 W bulkhead luminaires including LED Light driver holder connecting up with three core flexible copper conductor cable of suitable size, Aluminium housing complete with necessary connection including taking down old unserviceable one (Make: Crompton- CDR-211-09-40-SL-NWH / Bajaj BRDCSL9 watt WW / Philips RS378ZM55D75 WW) complete all as specified and directed.

S & F LED Luminaries 600mm x 600mm, 35/ 36 watt, 220 V AC recessed type with hifg efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamps suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases complete all as directed and specified.

M & L lamp holder,PVC/Polycarbonate type with back plate for batten fitting (Make- Havells/anchor/Legrand. ) complete all as specified and directed.

Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one all as directed. Make Phillips/Bajaj complete all as specified and directed.

Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and directed. (Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells) complete all as specified and directed.

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation all as specified and directed ( Make : Havells cat part no - GHWCAMTWH025 : /LG/Ronald.) complete all as specified and directed.

S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia all as specified and directed (Make: Prayag or equivalent in Polytuf/ Havells/ Sona.) complete all as specified and directed.

Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe complete all as specified and directed.

Supply and Fix of Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB with 240V, 20amp complete all as specifided and as directed. (Make- Legrand/L&T/ C&S)complete all as specified and directed.

Supply and fix in repairs MCB DB 4 way Triple pole and neutral 415 volts, double door with 200 Amps standard bus bar complete all as specified. (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule all as specified and directed .

Supply and fix in repair MCB Distribution board , 12 ways, 240 volts single pole and neutral ,double door, with 200 Amps rated busbar complete all as specified and directed. (Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.) complete all as specified and directed.

Supply and fix MCCBs 415 Volts, 100 Amps, 16 kA, 4 pole complete all as specified and directed including taking down old one complete all as specified and directed.

S & F wiring for circuit/Sub main wiring alongwith two run single core 6 Sqmm FRLSH copper conductor cable PVC Casing Caping insulated alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM complete all as specified and directed.

S & F wiring for circuit/Sub main wiring alongwith two run single core 10 Sqmm FRLSH copper conductor cable PVC Casing Caping insulated alongwith one run of 10 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 10 sqmm and one run of 10 sqmm cable and one run of PVC conduit shall be measured as one RM complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as specified and directed.

R K CONSTRUCTION