REPAIR TO BOUNDRY WALL,CHAIN LINK FENCING,DRAIN,DRAIN COVER,FLOORING AND CERTAIN REPAIR WORKS IN DOMESTIC AREA AT AF STN JAISALMER

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as spd and dir.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n'exc 50m and making good distrubed surface for any type of soil complete all as spd and dir.

M & L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation for concrete post/struts complete all as spd anddir.

S&F mild steel angle iron posts and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire,etc;flat iron fillets(for securing wire mesh etc) including all necessary drilling ,bolting or riveting,etc, and similar works conforming to Fe-410-0 or Fe-310-0.

S & F round tie bars 10mm dia conforming to Fe290 Gde E-165 let in and fixed independantely incl hooking ends for securing wire mesh chain link fencing as in bearing bars complete all as spd and dir.

Ditto all as per item no above but except bars

Dismantling chain link fencing wire, any type complete all as spd and dir.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed

Supply only MS Galvanized chain link fencing any size and type complete all as specified and directed

S&F mild steel screw bolts (machine made) with hexagonal or square head and one end screwed or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut, exc. 5 cm long & diameter of neck 5 to 10mm complete all as specified and directed .

S&F in repair galvanized, 2 strand, steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanized MS wire staples or steel pins etc as specified. (each line wire to be measured). complete all as specified and directed

All as per item no. 20 above but Restraining resecuring including making good staples etc complete all as spd and dir

Taking down one way Trellis work (jafri), including taking as under of battens of trellis (posts and rails measured separately)

Providing precast cement concrete 1:2:4 type B0 (12.5mm stone aggregate) louvres and jallies, 25mm thick (measured solid) set in cement mortar 1:4 including all mouldings complete all as spd and dir.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M & L Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in CM 1:4 incl dismantling of damage/extg wall complete all as spd and dir.

M & L Pre-cast cement concrete block masonry with solid blocks, type C-1 1:3:6 (Using 20mm stone aggregate)exc. 10 cm in width and setting in mortar,incl dismantling of damage/ extg wall complete all as spd and dir

M&L PCC/RCC1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching etc incl necessary form work complete all as specified and directed

M & L Raised pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 comlete all as spd and dir.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as spd and dir.

M&L 15mm thick cement plastering in cement morter 1:4 on other than fair faces of brick/concrete/stone work finsihed cement complete all as spd dir.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of exterior emulsion (Apex) over a coat of primer complete all as spd and dir.

M&L preparation of new steel surfaces of any description,exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L preparation of new steel surfaces of any description,n ' exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L preparation of old steel surfaces of any description,n ' exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L Welding in repairs n.exc 2.5 cm in length, thickness of mild steel members to be welded not exc 6 mm complete all as specified and directed.

M&L Welding in repairs exc 2.5 cm but n. exc 5 cm in length, thickness of mild steel members to be welded not exc 6 mm complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Mild steel TMT bars 10 mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto as above but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders

Excavating in trenches n exc 1.5m wide and n exc 1.5 m in depth for foundation etc and getting out soft /disintigrated rock

M & L for Returning , filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm compete

M & L for Removing excavated soil n.exc 50m depositing where directed at a level n exc. 1.5 m as directed by Engineer-in-charge

M&L PCC 1:2:4 type B2 using 40mm graded crushed stone agg in surface channel and drain complete all as spd and dir.

M&L 75mm thick PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth/path finished even and fair all as specified.

M&L fo 60 mm thick precast interlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS-15658-2006 laid and joints over sand cushion layer complete all as specified .

M&L for chequered cement concrete tiles 300mm X. 300mm x 20-25mm thick, set, jointed and pointed in near cement slurry in floor with grey cement and pigment including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

S & F Stone railing having one side carving of approved design and pattern (Jali pattern) suitable for flat surfaces containing 30-40cm wide, 10cm thick base stone fixed to levelled surface fixed in cement and sand mortar 1:3 after dismantling of existing railing of any description, size and demolition of existing surface for resting base stone and make good surface with neat cement, making suitable size holes in base stone to receive railing posts (post girth upto 40cm) at 0.90-1.20 centre to centre, post shall have cutting to inner sides to take stone railing of 5.0cm thick and required length and height (upto 0.80m) making all holes fixed with coloured cement, chemical to match the colour of railing, washing of complete prepared railing with mixture of water and acid followed by coloured cement polishing to match the natural texture of stone all as specified and directed. Note: (i) Measurement will be taken from top of base stone to bottom of newel cap and gross measurement with post will be taken for all carving areas for payment purpose. (ii) Rates are included base stone, newel post, stone railing with all suitable fixing arrangements in position as directed. (iii) Sketch-1 of required design enclosed for ready references. (iv) Design and colour of stone shown on sketch for reference only. The same shall be approved by GE before execution of work/order by contractor.

S & F Stone wall cladding with jaisalmer yellow stone having minimium 18mm thickness including outer face properly polished and fixed on wall with fastner and adhesive with CM 1:3 and all holes should be filled with coloured cement/ chemical to match the stone colour washing of complete prepared with mixture of water and acid followed by coloured cement polishing to match the natural texture of stone incl demolition of extg stone fixed portion all as specified and directed. Note: (i) Measurement will be taken as length x width for payment Purpose. (ii) Rates are included Stone wall cladding with all suitable fixing arrangements in position as directed. (iii) Sketch-5 of required design enclosed for ready references. (iv) Design and colour of stone shown on sketch for reference only. The same shall be approved by GE before execution of work/order by contractor.as shown in Sketch- 3

M&L for preperation of old decorated or unplastered surfaces by brooming down and steel wire brushing , scrapping , down smoke soot, and greasy spot etc, and applying one coats of exterior emulsion paint (Apex) on surfaces of walls/Floor surface (VVIP area) any colour as approved by GE

S&F Providing SFRC manhole covers with rectangular frame of size 44"x26" MD-10 fixed at site up to satisfactoin of Engr-in-Charge and including dismentling of old manhole cover slab complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for any shade Vitrified coloured ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for any shade Vitrified coloured ceramic tiles 10 mm thick as in skirting over and including set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M & L Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M & L Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M & L Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M & L Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

S&F glazed ceramic colour tiles 450X 350X 7mm thick on vertical surface such as skirting, dado, set and joint in neat cement slurry and pointed in white/coloured cement to match with existing surface make as a specified.

M&L for 10mm thick plastering in CM (1:4) finished fair faces of brick work or concrete surfaces for receiving tiles in dado/skirting all as

M&L for screed bed on bedding layer of cement mortar(1:6) 15 mm thick for laying floor finishes all as specifiled and directed.

M&L 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in window- cills, cooking platforms and etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including15 mm cement screed bed in CM 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete necessary cutting, notching etc for sink.

M&L for 10mm thick size 300x300mm coloured endura parking Tiles over and including 15 mm thick screed bed in cement and sand morter 1:6 complete all as specified and directed.

M&L 20mm thick Machine cut Kota stone slab flooring for riser of steps,skerting ,dado etc.over incl 15 mm thick cement mortar 1:6 screed bed or bedding layer and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing etc complete

Demolition of cement concrete (unreinforced) in ground floors (below or above ground level ) not exceeding 15 cm thickness complete all as spd and dir

Demolition of cement concrete (unreinforced) above ground floors not exceeding 15 cm thickness complete all as spd and dir

M & L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) as in 25 mm thick levelling coarse in flooring finished even and rough.

M & L 40 mm thick PCC type B-1,1:2:4 (using 20mm graded aggregate) as in flooring finished even and smooth with using extra cement all as specified.

Taking down shutters of any description of area exc 1Sqm & n.exc 2 Sqm complete all as specified and as directed.

S&F Factory made 2nd class hard wood plain, framed , paneled shutters 35mm thick (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part-I) , kiln seasoned and chemically pressure treated complete

S&F 2nd class Hard wood glazed/skeleton shutters 35mm thick open rebated prepared to receive glass, gauze etc devided in squares with plain, chamfered or rounded, mitred and rebated sash bars any number with plain, chamfered or rounded, mitred and rebated beads for securing glass gauze etc. complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered withheat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style & rails with suitable PVC sheet beading, and jointed togather with solvent cement,supplying & fixing in the frame at site as per specification and drawing

S&F mild steel butt hinges medium weight cold rolled of size 100 mm shutters. complete all as specified and as directed.

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm. complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm. complete all as specified and as directed.

S&F 250 mm Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sloding bolt of extruded section or cast alluminium alloy of size 250mm. complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamealle paint over a coat of pink primer. complete all as specified and as directed.

Taking down & refixing in the same opening after resecuring or easing & adjusting of shutters of any description exc 1 Sqm but nexc 2 Sqm each.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame/shutter work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including roller for sliding window, handle, locking device, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, incl taking down old chowkhat/shutter all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F expanded metal mesh Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer - in- charge.

S & F 3.0 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and fixed to steel window in square exc 0.5 sqm in each pane complete all as specified and as directed.

Demolition of Stone slabs and tiles laid dry and pointed of any description or thickness in floors, aprons etc complete all as specified and directed

M&L for chequered cement concrete tiles 200mm X. 200mm x 20 to 25mm thick, set, jointed and pointed in near cement slurry in floor with grey cement and pigment including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L 75mm thick Cement concrete 1:3:6, type C-2 ( using 40mm graded stone aggregate)as in path complete all as specified and directed.

MARUDHARA CONSTRUCTION COMPANY

deepaktraders

M/s Sati Jasnath Enterprises

HINGLAZ ENTERPRISES

JASOL MAA ENTERPRISES

M/S VISHNOI ENTERPRISES

GEMRARAMCONTRACTOR