SPECIAL REPAIR TO BLDG. NO. P-172 SINGLE LIVING OFFR ACCN AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT

Amount

Demolition of cement concrete in ground floor and paving/ sunken portion (below or above ground level) complete all as specified and directed.

Material and labour cement concrete (1:5:10) type E-2 using 40mm graded brick aggregate as in filling in sunken portion and mass concrete complete all as specified and directed.

Material and labour applying two coats of FOSROC/NITOBOND/SHALIMARSUPERCRETE water proofing coating on the entire surface of sunken portion complete all as specified and directed. MAKE;- above brand in P.S-II

Material and labour 15mm thick cement screed in cement mortar (1:3) with integral WPC FOSROC/ NITOBOND/ SHALIMAR SUPERCRETE complast X 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC’s Nitco bond AR cement slurry/ STP No 1 liquid @ 200 ml per bag complete all as specified and directed. MAKE;- above brand in P.S-II

Material and labour 25mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sub floors, sub base; concrete surfaces finished fair & even to receive topping floor finish/ layer complete all as specified & directed.

Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Material and labour glazed ceramic coloured tiles of size 450 x 300 x 6 to 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

Material and labour vitrified ceramic light shade/ designed tiles, area of each tile n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including rendering 15mm thick in cement mortar (1:6) finished rough to fix tiles complete all as specified and directed.

Material and labour vitrified ceramic tiles 10mm thick, any shade as approved, area of each tile n. exc. 0.36 Sqm (square/ rectangular) in vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

Material and labour 18-20mm thick machine cut Kota stone slabs 550mm x 550mm as in flooring, jointed with grey cement mixed with pigment to match the shade of the slab including grinding, rubbing and polishing to mirror finish with & including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for laying floor finishes including neat cement slurry with 3 Kg/Sqm complete all as specified and directed

All as per Srl item No 12.00 but as in skirting laid over and including 10mm thick rendering in cement mortar (1:4) as backing coat.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed.

Supply and fixing aluminium anodised, barrel tower bolts of extruded section and fixed, 200mm long all as specified and directed.

Supply and fixing extruded aluminium alloy handles, fabricated type, anodised, D-type, 150mm size, all as specified and directed.

All as per srl item No. 17.00 here-in-before but 100mm

Supply and fixing 100mm size butt hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed complete all as specified and directed.

Material and labour for 165 x 60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed.

Material and labour 35mm thick 2nd class hard wood factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

Supply and fixing 125mm size hasp and staple, mild steel, wire type, stove enameled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing 30mm thick (style) factory made PVC flush cupboard shutter consisting of panel of hollow section thickness consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hallow profile section at an equal distance from top and bottom of door and fixed with hallow profile section using 5mm thick PVC sheet using screws hollow PVC profile shall be lipped with 10mm (5mm x 2) thick x 20mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof water proof and fire retardant prelam PVC sheet using solvent cement on both the sides of the panel etc complete all as specified and directed.

Supply and fixing 250mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

Supply and fixing MS 150mm size PTMT bow handle fixed with machine screws complete all as specified and directed.

Supply and fixing 200mm size PTMT tower bolt fixed with machine screws complete all as specified and directed.

Material and labour for powder coated aluminium window/ ventilator shutter side hung having 75mm x 44mm x 2.85mm thick stile bottom rail an top rail including necessary fitting joinery cleat glaring packing snap beading 10mm x 10mm, 2 Nos of powder coated aluminium handle 150mm size, 2 No chromium plated bott hinges 75mm size and 2 No 100mm long aluminium tower bolt etc including frame of section 100mm x 44mm x 3mm and including 5mm thick float glass and fixing complete all as specified & directed.

Material and labour in repairs 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leaping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Wire brushing and cleaning top surface of cement concrete, including flashing and junction of parapets etc complete all as specified and directed

Material and labour for brushing neat cement slurry with 2.75 kg of cement per sqm complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed

Material and labour for PCC (1:2:4) type B-1 (using 12.5mm graded stone aggregate) as in cills, PCC blocks, coping, benching, water troughs, seismic and other similar bands plinth bend, etc including weathering, slightly rounded or chamfered angles throating, including necessary form work complete all as specified and directed

Material and labour for cleaning top surfaces of cement concrete by wire brushing and applying 10mm thick cement plaster in cement mortar (1:3) on concrete surface of roof slab complete all as specified.

Material and labour for applying a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/ sqm over the roof surface including cleaning surfaces complete all as specified and directed

Material and labour for APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified and directed

Material and labour for brick tile terracing with 40mm thick brick tiles laid over and including 15mm thick screed in cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

Material and labour flush pointing to brick terracing tiles in cement mortar (1:3) complete all as specified and directed.

Supply only integral water proofing compound all as specified and directed.

Supply and fixing chromium plated brass wall mixer 3 in 1 system with provision for both telephone shower and overhead shower complete with 115mm long bend pipe arrangement with connection approved quality complete all as specified and directed Make : Jaquar (Continental Accessories) Cat No. CON 281 KN or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Supply and fixing in repair 15mm bore bib tap, long body fancy type cast copper chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed Make : Jaquar (Continental) Cat No. 047KN or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Supply and fixing in repair 15mm bore stop cock/ angle cock with wall flange, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends, concealed type fixed to iron pipe cast copper chromium plated screwed down high pressure and fixed complete all as specified and directed Make : Jaquar (Continental) Cat No. 059KN or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Supply and fixing in repair 15mm bore stop cock (Concealed type) with fitting sleeve, operating lever and adjustable wall flange with seal, screwed down, high pressure for iron pipes or for unions fixed complete all as specified and directed Make : Jaquar (Queen's) Cat No. QQT-7083K or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Supply and fixing vitreous china wash hand basin, pedestal type white, flat back 550 x 400mm including one number brass CP waste coupling, 32mm dia, PVC waste pipe with connector, brackets 2 numbers including cutting for and pinning in ends of brackets fixed in repairs complete all as specified and directed.

Supply and fixing vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminium hinging device including mild steel chromium plated jet fixed to water closet with 415mm to 445mm long flexible pipe complete all as specified and directed.

Supply and fixing coloured PVC valveless, syphonic action type flush tank, white, 10 litre capacity with inlet ball valve, float & handle including brackets complete high level, flush pipes of PVC 32mm dia, rubber cones, PVC connection 15mm size with PTMT nut of length 600mm etc complete all as specified and directed.

Supply and fixing chromium plated brass towel ring square type fixed with and including chromium plated brass screws and wooden/ plastic cleats, approved quality complete all as specified and directed Make : Jaquar (Continental Accessories) Cat No. 1121N or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Supply and fixing chromium plated towel rack 600mm (24") size with lower hanger fancy type with and including chromium plated brass screws and wooden/ plastic cleats, approved quality complete all as specified and directed Make : Jaquar (Continental Accessories) Cat No. 1181N or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Supply and fixing soap dispenser with metallic bottle complete all as specified and directed Make : Jaquar (Continental) Cat No. ACN1137N or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Supply and fixing PVC connection fiber, reinforced 45 cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified and directed.

Supply and fixing in repair toilet paper holder of chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed Make : Jaquar Cat No. AKP-35751P or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Supply and fixing soap dish stainless steel chromium plated fixed in repair with brass screws and rawl plug complete all as specified and directed Make : Jaquar Cat No. AKP-35731P or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed complete all as specified and directed Make : Jaquar Cat No. CAN-1171N or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Material and labour for PVC bathroom cabinet of size 535mm x 483mm x 110mm with mirror fixed in repairs complete all as specified and directed.

Supply and fixing chromium plated health faucet for EWC with 1 m long CP tube with CP wall hook superior quality fixed complete all as specified. Make : Jaquar or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Supply and fixing in repair brass chromium plated shower rose of 150mm size with or without swivel joints including fixing to steel pipe or union complete all as specified. Make : Jaquar model No. OHS-1805 or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Supply and fixing chromium plated brass JET including PVC pipe connection fixed to EWC complete all as specified. Make : Jaquar Cat Part No. ALD IVY-583 or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Supply and fixing hand shower (health faucet) with 8 mm dia 1 mtr long flexible tube and wall hook with NRV (back flow preventer) fixed in repair complete all as specified. Make: Jaquar Cat No. ALD 577 or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications

Taking up or down 15mm bore old steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Material and labour galvanised steel tubes 15mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc. including taking up/ down existing tubing complete all as specified and directed.

Taking up or down 20mm bore old steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Material and labour galvanised steel tubes 20mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc. including taking up/ down existing tubing complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting n. exc. 10cm girth complete all as specified

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) n. exc. 150mm dia including all fittings, set in cement mortar complete all as specified.

Supply and fixing 110mm bore PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to wall, laid in trenches or in floors complete all as specified.

Supply and fixing 75mm bore PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to wall, laid in trenches or in floors complete all as specified.

Supply and fixing PVC (SWR) junction single (Single T) 110mm bore, equal or unequal complete all as specified

Supply and fixing PVC (SWR) bends any radius 110mm bore with access door all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 75mm bore with access door all as specified and directed.

Supply and fixing PVC (SWR) vent cowl 110mm bore all as specified and directed.

Material and labour for 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing surplus spoil out of defence land where directed complete all as specified.

Material and labour 10mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour 5mm thick rendering in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying two coats of Emulsion paint over a coat of birla white putty complete all as specified and directed.

Material and labour preparation of newly plastered or un-plastered surface of walls including cornices, plasters etc. and applying two coats of cement base paint complete all as specified and directed.

Material and labour preparation of new plastered surface of wall and applying three coats of white washing complete all as specified and directed.

Material and labour preparation of new wooden surfaces of any description and applying two coats of varnishing with synthetic varnishing over one coat of primer & oil complete all as specified and directed.

Material and labour for preparation of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying two coats of white wash complete all as specified.

Material and labour for complete removal of existing treatment by washing, rubbing down and stopping etc on wall and ceiling surfaces and applying two coat of oil emulsion distemper over one coat of primer complete all as specified.

Material and labour for preparation of old surfaces of ceiling including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying two coats of white wash complete all as specified.

Material and labour complete removal of existing treatment by washing, rubbing down and stopping etc on wall surfaces and applying two coats of cement base paint complete all as specified.

Material and labour 14/ 16mm thick machine cut Udaipur green polished stone slab, set and jointed with neat cement slurry mixed with pigment to match the colour of stone, laid over and including minimum 15mm thick screed bed in cement mortar (1:6) including cutting and polishing and making holes in stone and RCC shelves suitable for passing gas pipe with round edges as required complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. but excluding precast complete all as specified and directed.

Material and labour brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.

Material and labour brick work with old size sub class 'B' bricks, straight or curved on plan exc. 6m mean radius and built in cement mortar (1:4) complete all as specified and directed.

Material and labour 25mm dia powder coated mild steel curtain rod, fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side), shade as approved by GE complete all as specified including fixing of long size rawl plugs in wall for MS hook fixed complete all as specified and directed.

Material and labour 100mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub base, hard standing, concrete surfaces finished even & rough to receive topping floor finish/layer all as specified & directed.

Material and labour 60mm thick coloured reflective type machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over and including 35mm thick sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed.

Supply and fixing rotational moulded polye-thylene water storage tanks, 1000 litres capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, complete all as specified & directed.

Material and labour ball valve brass high pressure with polythene float and fly nut complete screwed for 20mm bore dia of iron pipe or brass ferrule and fixed complete all as specified

Supply and fixing stop valves 20mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thick (below or above ground level) and removing surplus spoil out of defence land where directed at a level n.exc 1.5m above the starting point complete all as specified and directed

Material and labour 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, laid in panels including finishing the concrete surface even & smooth without using extra cement complete all as specified & directed.

Material and labour salt glazed stone ware drain pipes 150mm bore laid in trenches and jointed complete all as specified and directed.

Material and labour salt glazed stone ware drain pipes 200mm bore laid in trenches and jointed complete all as specified and directed.

Material and labour salt glazed stone ware drain pipes 300mm bore laid in trenches and jointed complete all as specified and directed.

Material and labour PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Material and labour PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to 200mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Material and labour PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to 300mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Material and labour rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified.

Material and labour for precast cement concrete type B-1 1:2:4 (20mm graded aggregate) and set in Cement Mortar (1:4) as in landings, manholes cover slabs, chajjas, shelves and similar articles including necessary form work complete all as specified and directed.

Material and labour for MS TMT bars 10 mm and over dia and cut to length, bent to shape required including cranking bending spirally for hooping for clos hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed

Material and labour cutting into existing manholes for connecting 150mm bore new drains by cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 and making good pipe and reforming benching as required finishing even and smooth complete all as specified and directed.

Material and labour mild steel work as in holdfasts, knee piece and similar small article complete all as specified and directed.

Taking off manhole cover, cleaning of manholes in use by taking out complete sludge water, solids, brick bats, polythene, silt etc complete mechanically by HCV mounted suction discharge machine / manually, removing/ disposing the entire sludge outside periphery of Defence land including placing the manhole cover properly after cleaning for 1st manhole exceeding 1mtr depth but not exceeding 2mtr depth of any Size complete all as specified and directed.

All as per srl item No. 113.00 but exceeding 2mtr depth but not exceeding 3mtr depth of any Size

Supply and fixing 150mm dia cast iron gully trap n.exc 5 Kg each setting and jointing with cement joint complete all as specified and directed

Taking down carefully existing point wiring of any type (ie on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings & fixutres such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawl plug, screw etc including removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

Material and labour for point wiring for one light point controlled by one switch SP one way with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit, medium grade, ISI marked 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc including cutting chases in wall for laying of conduit and making good to all disturbed surfaces and matching the same with adjoining specifications, sunk type pressed steel terminal switch box 1.6mm thick with 3mm thick plastic laminated sheet top cover make hylam fixed with nickel polished brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed.

All as per srl item No. 117.00 above but for one fan point controlled by one switch through regulator.

All as per srl item No. 117.00 above but for one socket outlet 5 Amps on independent board.

All as per srl item No. 117.00 above but for one socket outlet 5 Amps on same board with other switches.

All as per srl item No. 117.00 above but for one light point controlled by two way switches.

All as per srl item No. 117.00 above but for one bell point controlled by one bell push.

All as per srl item No. 117.00 here in before but with 2.5 Sqmm (nominal area) FRLS cable for one 3 pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed.

Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified and directed.

Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete all as specified and directed.

Supply and fixing switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified and directed.

Supply and fixing socket out let 5 Amp, 5 pin flush type complete all as specified and directed.

Material and labour socket outlet multipurpose 3 in 1, 6 pin, 5 & 15 Amps, flush type complete all as specified and directed.

Supply and fixing ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified and directed.

Supply and fixing batton holder ISI marked insulated body complete all as specified and directed.

Supply and fixing city 1 new decorative wall light fixture made up of polycarbonate, suitable for lamp type 1 x 9 watt retrofit LED lamp including 9 watt LED lamp of same make as fitting complete all as specified.

Supply and fixing five step socket type fan regulator, electronic type, single phase, including connection complete after dismantling/ removing unserviceable regulator all as specified and directed.

Material and labour for sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through PVC rigid non metallic conduit including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified and directed. Note: Two run of 4 sqmm wire and one run of 4 sqmm wire as earth wire through rigid PVC conduit shall be measured as one RM.

Supply and fixing sheet metal enclosure for DBs when MCBs to be used, SPN 8 ways 240 V, with 200 Amps rated bus bar, double door all as specified

Supply and fixing in repairs sheet metal enclosure for DBs when MCBs to be used, SPN 8 ways 240 V, with 200 Amps rated bus bar, double door all as specified

Material and labour in replacement DB's 4 way VTPN double door with bus bar of 200 Amps rated pre-fitted with MCCB as incomer, 63 Amps, four pole, 415 volts with capacity 16 KA, and MCBs SP 6-32 Amps 10 KA (as per site requirement) in outgoing circuits complete with PVC insulated FRLS copper conductor wire of suitable size, with neutral bar and earth bar complete all as specified and directed. Note:-Rate for MCCB and MCB are deemed to be included in quoted rates.

Material and labour in replacement MCB SP 5 to 32 Amps, 10 KA, C-curve complete all as specified and directed.

Material and labour in replacement MCB SPN 20 Amps, 10 KA, C-curve complete all as specified.

Supply and fixing in replacement Deco Ultra Slim linear LED lighting fixture with co-extruded polycarbonate body environmental friendly energy efficient ready to use pack 18/20 W LED 6000K complete all as specified and directed

Material and labour in replacement energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED for bldg security lights with high efficiency electronic driver, having IP-65 protection, surge protection min 2 KV power factor more than 0.95 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India only including bracket made out of GI pipe 40mm dia 1.20m long bent to shape and clamp 40x6mm with nuts and bolts complete all as specified. Notes: (i) Contractor shall be provided 2 years written manufacturer's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited Laboratory from manufacturer.

Supply, laying, testing and commissioning of LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor size 25 Sqmm 4 Core all as specified and directed

Excavation in trenches in soft /loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.

All as per Ser item No. 142.00 here-in-before but for each additional height 1.5m and or part thereof in depth beyond the first 1.5m

Returning, filling in including leveling, watering and well ramming in layers n. exc. 25 cm thick each layer complete all as specified and directed.

Removing excavated material (soils) to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour sand for cushioning with 8cm thick layer before laying of cable and 15cm thick layer after laying of cable in trenches complete all as specified and directed.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/ abutting each other complete all as specified and directed.

Supply and fixing GI pipe light grade ISI marked of size 50mm bore for cable protection including provision of fitting along GI pipe along wall/ pole/ laid under the road/ floor complete all as specified.

Taking down and refixing ceiling fan of any sweep or make, filling cavities with filler one coat after cleaning, painting the complete fan (as per previous colour) using synthetic enamel paint by spraying including replacement of flexible wire, rubber reel, nut, bolts etc. and re-fixing in original position complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4 mm dia by means of nut, bolts, check nut & washer of galvanized iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3 mtr above ground level along pole fixed with two clamps of 25mm x 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No. 3 of SSR Part-I 2009 connected to earthing test point all as specified and directed and testing on completion inlcuding PCC (1:3:6) type C-1 cover and frame excavation and earth work etc complete all as specified.

Supply and fixing call bell, ding dong AC single phase, 230 volts including wooden/ PVC board of suitable size, connecting & testing complete all as specified and directed.

Supply and fixing in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp 240 V 10 KA including top plug complete all as specified and as directed.

Material and labour in replacement bell push switch flush type 5 Amps, SP, 240 volts complete all as specified and directed.

JAGDISH SINGH AND CO

NATIONAL BUILDERS

NIRMAL SINGH

SARASWATI CONSTRUCTION CO

KABEER CONSTRUCTIONS