PROVISION OF URINAL FOR CANDIDATES GENTS AND LADIES AND FENCING WITH PRIVACY SCREEN FOR GTO GROUND AT SECTOR 62 NOIDA

Amount

Suarface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft /Loose soil complete all as speciified & directed

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 depth for foundation etc or for shafts well cesspits manholes pier holed etc 10 SQM on plan and getting out in soft /Loose soil complete all as speciified & directed

Excavating over areas, n exc1.5 m deep and getting out in soft /Loose soil complete all as speciified & directed

Excavating over areas, exc1.5 m deep but n exc 3.0m deep and getting out in soft /Loose soil complete all as speciified & directed

Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and directed. Note:-As per NCR/Noida auth Norms

Excavation in Post holes each , not exceeding 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25 cm , watering, and removing surplus soil to a dist n. exc 50 m and making good surface.in any type of soil complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40 mm graded aggregate in Foundation filling and mass concrete / Bed concrete complete all as speciified & directed.

M&L for RCC M-25 (design mix) ( using 20 mm graded stone aggregate ) as in foundation, including rafts, footing, foundation beams, plinth beams, bases for columns etc basement slabs complete all as speciified & directed

M&L for RCC M-25 Design Mix concrete (using 20mm graded aggregatet) as in columns, pillars, piers, post and struts. Complete all as specified and directed.

M&L for RCC M-25( Design Mix) concrete (using 20mm graded aggregatet) as bends, lintels over 1.50 M span etc complete all as specified and directed.

M&L for RCC M-25( Design Mix) concrete (using 20mm graded aggregate) as in shelves/slabs supported on walls, beam and columns, in floors ,roof, landings, balconies, slabs in shelves and the like complete all as specified and directed.

M&L for form work to sides of concrete foundations ,footings, bases of coloumns,raft and raft beams sides and soffits of foundation and plinth beams and similar work vertical or to better complete all as speciified & directed

M&L for formwork sides and soffits of floor or roof beams, beam haunching , girders, bressummers ,lintels, bends, cantilivers, shelves including supports, overhangs, etc, also splays between floors and beams, etc complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs/shelves, floor slabs, landing and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finish surface complete all as specified and directed.

M&L for form work to sides of columns, pillars, posts etc and stanchion with rough finished surface of concrete complete all as specified and directed.

S&F for mild steel bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F for mild steel bars of 5mm dia and over upto and including 10mm dia in stirupps, spacers and binders but in stirupps. Complete all as specified and directed.

M&Lfor old size Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed.

M&Lfor old size Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in cm (1:4) complete all as specified and directed.

M & L Brickwork with sub classs 'B' bricks in one brick thick honey comb walling, built in cm 1:4 complete all as specified and directed.

M&L for 5 mm thick rendering in CM 1:3 on fair faces of brick work or concrete ceiling surfaces with and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new surfaces plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty/primer on wall, trowelled to even and smooth finish complete all as specified and directed.

M&L for preparing new surfaces plastered or unplastered surfaces of ceiling with birla white care putty and applying two coats of white wash on ceiling complete all as specified and directed.

M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 KG of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including wooden beading for providing groove. complete all as specified and directed.

M&L rendering 10 mm thick CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for broken stone hard core of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and well rammed to a true surface all as specified and directed.

M & L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base, floors and pavings etc. all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5 mm graded aggregate as in floor to receive floor finishes etc. complete all as specified and directed.

M&L for Non skid ceramic coloured joint free tiles 400mm x 400mm 7to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15 mm thick in cement mortar (1:4) laying floor finish complete all as specified and directed.

M&L for Glazed ceramic dak shade glossy tiles coloured of size 600x1200x10 mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including cement screed bed 10mm thick in cement mortar (1:4) complete all as specified and directed.

M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate ) as in plinth protection and similar works 75mm thick finished fair and smooth without using extra cement including necessary form work complete all as specified and directed.

Providing and fixing factory made uPVC white colour casement/sliding window/door/ventilator, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x100mm long fasteners, all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) Note:-EACH member of window to be measured separately wrth clear length Casement window (outward /inward opening) with hinge system A(1) Frame (60mm x 58mm) complete all as specified and directed.

Providing and fixing stainless steel (SS-304 grade) A 200 x 19 x 1.9 mm friction hinges to the side/top hung uPVC windows/Ventilator, of approved quality, with necessary stainless steel screws etc. all as specified and directed.

Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete all as specified and directed.

Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete all as specified and directed.

S & F for figured glass, pin head type 4mm thick, ordinary quaility, not exceeding 0.5 SQM in EACH pane and glazed with oil putty in square all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 KG/CUM, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made etc complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 KG/CUM and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F SS, sliding door bolt of length 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed

S&F SS barrel tower bolts extruded section of size 150 mmlong, all as specified and directed

S&F SS handle extruded febricate type anodised of size 150 mm complete all as spd and directed.

S&F for SS 100mm medium weight cold rolled SS butt hinges all as specified and directed.

S&F Mirror-White 900x600x6 mm fixed with frame washers all as specified and directed (Make: Prayag BLM-103F /Cera or equivalent).

S&F white WC Wall Hung Verve of Size: 665 x 360 x 730mm , Flush Cistern Closet including Soft Close(including Jet spray), Hinges, Fixing Accessories Set and Accessories S Trap-300mm .(Make Parryware C0269 & C0762 or equivalent) etc. complete all as specified and directed.

S&F in floor steelness steel gratings, 125mm dia complete all as specified and directed.

S & F automated water sprinkler urinal , size of 360 x 345 x 620mm white , with grating and union for discharge pipe including flushing system, flush pipe & wate pipe ) all as specified & directed.(Make Parryware C0584 with Power Source or equivalent)

S&F wash hand basin Counter Top , white, flat back, size 550 x 450 x 200mm)) , including cutting and or all as specified and directed. (Including Two Sensor Basin Mixer pillar tap, waste coupling and 32mm dia PVC waste pipe) complete all as specified and directed (Make Parryware C0431 for W.H.B & T4735A1 for pillar tap or equivalent)

S & f for 100mm cast iron sanitary conncetion for WC complete all as specified.

S & f for 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed.

S&F 15mm bore Haf turn fancy type CP bib taps cost copper alloy with crutch or butterfly nuts, handle, screwed down for iron pipe complete all as specified and directed.

S&F 15 mm bore Haf turn CP stop/angle valve cost copper alloy screwed down, high pressure with crutch or butterfly handle fancy type complete all as specified and directed.

S&F for Rotational moulded polythylene 1000 liters capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high pressure of PTMT with epoxy coated alu rod & high density plastic ball complete all as specified and directed.

S & F for gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed for bore of pipe 20mm. complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wallls/floor (includign Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc) complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor (including Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc) complete all as specified and directed.

S&F PVC (SWR) bends any radius all as specified and directed.

S&F 75mm PVC (SWR) vent cowl all as specified and directed.

S&F for CPVC pipe SDR-11,16MM bore with plain SDR-11 Fittings complete to wall and celing or laid floors or concealed & joiny only with CPVC solvent cement only incl brass fitting (Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc), complete all as specified and directed.

S&F for CPVC pipe SDR-11 ,20MM bore with plain SDR-11 Fittings complete to wall and celing or laid floors or concealed joiny only with CPVC solvent cement only incl brass fitting (Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc), complete all as specified and directed.

M & L for PCC 1:4:8 type D2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for pipes of 150 mm bore complete all as specified and directed.

M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed as specified.

M&Lfor PCC 1:2:4 type B-1, (using 20mm graded aggregate) as in coping , benching, haunching including all necessary form work as specified.

M & L for Precact cement concrete 1:2:4 type B1 (Using 20mm graded granite stone aggregate ) in landings, cover slabs ( for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

S&F 15 mm size PV C connection with PTMT nuts of 600 mm long complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over 15 mm thick screed bed in cm 1:4 complete all as specified and directed.

S & F Papper holder with cover including all Accessories complete all as specified and directed. (Make Parryware T6514A1or equivalent) .

S & F Corner Glass Shelf including all Accessories all as specified and directed.(Make Parryware T6703A1 or equivalent).

S & F Towel Rack 40mm including all Accessories all as specified and directed.(Make Parryware T6709A1 or equivalent) .

S & F Health Faucets Cardiff with SS Hose & Hook (Brass) including all Accessories all as specified and directed. make parryware No T9941A1..

S & F CU (Corner unit ) Toilet block cubical made of HPL 12.0MM Thick boards of colour of textured surface as approved by Engr-in-Charge of size 1200x1000x1995mm ,door size of 600x1785mm with 150mm groun clearance incl necessary hardware (aluminium U/F channel, Aluminium top rail, stainless steel gravity hinges, alloy privacy tumb-turn with indictor ,SS coat hook CUM door stopper, SS door knob , SS adjutable foot , Polyamide top rail end cap and aluminium door stopper channel etc ) complete all as specified and directed by Engr in charge (Make Greenlam model Classique Versatile S & F EU (Enclosed unit) Toilet block cubic made of HPL 12.0MM thick boards of colour or textured surface as approved by Engr-in- Charge of size1200x1000x1995mm ,door size of 600x1785mm with 150mm ground clearance incl necessary hardware ( aluminium U/F channel, aluminium top rail, stainless steel gravity hinges, alloy privacy tumb -turn with indictor, SS coat hook CUM door stopper, SS door knob, SS adjutabe foot, polyaide top rail end cap and aluminium door stopper channel etc) complete all as specified and directed (Make Greenlam Model Classique Versatile(Make Greenlam Model Classique Versatile.

S & F Cast copper alloy chromium plate bottle trap fixed to WHB and wall complete all as specified and directed. ((Make Parryware T3202A1or equivalent complete all as specified and directed.

S&F 15 mm size PV C connection with PTMT nuts of 450 mm long complete all as specified and directed.

Rounding to edges of stone slab one edge, such as steps, cooking platform and other similar situations and rubbing and polishing complete all as specified and directed.

M&L for water proofing treatment to RCC roof slab incl parapet as under (a)20mm thick screed bed over RCC roof in CM 1:4 with WPC (b) Applying bituminious primer conforming IS 3384 1965 @ 0.50 KG/SQM over cleaned and dry roof surface incl parapet. (c) Applying hot blown grade 85/25 bitumen as per IS 702-1988 A 1.2 KG/SQM applied over primer. (c) Laying one layer of APP based polymeric membrane, 3mm thick, weight not less than 3.5 KG/SQM reinforced with non woven polyster fiber reinforced (wight not less than 150gm/SQM) sealed by torch application with a minimum overlap of 150mm and 100mm at end and side of polymeric membrane (d)Apply aluminium paint 0.2ltr/SQM two layer over APP membarance all as specified and as directed.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains;hand made sliding bolts; clamps hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S & F 12 MM thick Toughned glass as in hinged doors, partition automatic doors and similar work including cutting to shape, drilling holes required(including frosted etc) complete all as specified and directed.

Supply only Liquid water proofing compound all as specified and directed.

HARDSTANDING: M&L 100mm thick Plain cment concrete C2, 1:3:6 (using 40mm graded stone aggregate as sub base of floors or foundations complete all as specified and directed.

M&L for sand filling under floor in foundations inclding watering and consolidation complete all as specified and directed.

M&L for pressed precast Rubber pressed glorry finished concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness,M-35 grade laying in floors complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

FENCING & GATE: M&L, PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed. Note: Contractor has to get the fencing designed from approved consultant(fencing & gates) and design should be vetted by IIT/NIT or any Govt college before the execution of work and cost of same shall be deemed to be included inquoted rates

M&L, PCC Block (1:3:6) graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.

M&L for old size Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in 1:6, complete all as specified.

M&L plain cement concrete 1:2:4 Type B-1 using 20 mm graded stone aggregate as in cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work.(Coping) complete all as specified and directed.

Hand rails, half round or other steel section or hollow section(confirming to IS 2062:2011), drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square head and one end screwed or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut, exc. 10 cm but not exc. 15 cm long of 11 to 15 mm dia of shank complete all as specified and directed.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L preparation of new steel surfaces and apply two coats of synthetic enamel paint over a coat of red oxide primer n exc 10 cm width or girth all as specified and directed.

Preparing surfaces of wood and wood based materials steel and iron wk or old of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain/corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in wall covering/cladding, fixed with self tapping screws complete all as specified and directed.

S&F SS steel grade 304 for tubular pipes in door gate of angle or other section gusset plate rail brackets etc complete drilled for fixing steel sheeting or other conforming all as specified and directed.

S&F for mild steel bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F for mild steel bars of 5mm dia and over upto and including 10mm dia in stirupps, spacers and binders but in stirupps complete all as specified and directed.

M&L for vitrified tiles Granite /Marble /wood textures ceramic 10 mm tiles in vertical surfaces or floors n/exe 0.36 Sqm , over 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and directed.

S&F MS 1.60 mm thick MS plain sheet in steel gates and similar work, cut to size, holes punched, including round headed screws and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed.

M&L for RCC M-25 (design mix) ( using 20 mm graded stone aggregate ) as in foundation, including rafts, footing, foundation beams, plinth beams, bases for columns etc basement slabs complete all as specified and directed.

M&L for RCC M-25 Design Mix concrete (using 20mm graded aggregatet) as in columns, pillars, piers, post and struts complete all as specified and directed.

M&L for form work to sides of concrete foundations ,footings bases of coloumns,raft and raft beams sides and soffits of foundation and plinth beams and similar work vertical or to better complete all as specified and directed.

M&L for form work to sides of columns, pillars,posts etc and stanchion with rough finished surface of concrete complete all as specified and directed.

M&L rendering 15 mm thick CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed.

M &L for preparing plastered or un plastered new surface of walls and applying two coats of Cement base paint and priming with alkali resistant priming paint on walls.(Externally) complete all as specified and directed.

M&L 300mm bore reinforced concrete pipes, class NP3 laid and jointed completed with collars all as specified and directed.

Internal Electric Supply: Material and labour for Point wiring complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 voltsgrade confirming to IS-694 drawn through and including non metallic rigid PVC heavy duty concled conduit minium 20 mm dia,but shall be increased as per actual site requirement in accordance with clause No.19.125 of SSR Part-I ,with necessary accessories with Flush mounting boxes & white plates with frames housing of switches sockets / fan regulator etc. including 1.5 Sqmm single core solid multitranded copper conductor FRLS 1100 volts grade PVC insulated and unsheathed cable as earth continuity conductor to common earth & connecting to earth dolly complete all as specified and directed for;- (Note :- The cost of Mudular mounting boxes and modular plates included in the quatated rates) Make : (i) Flush mounting boxes Cat Part Module 18 from model No 6890-07 to 6890-12 of legrand or equivalent in havells, SIEMENS. (ii) White Plates : upto 18 module from No Mylanic series model No 6755 61 to 6755 78 of Legrand or equivalent in Havells / Siemens / Crabtree

One light point controlled by one,one way Switch all as specified and directed.

One fan point controlled by one,one way Switch all as specified and directed.

All as per item No 4.0 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board all as specified and directed.

S & F 6 A one-way SP switch - 1 module complete all as specified and directed Make Legard Cat No: 6755 01 or equvalent in Simens / Crabtree

S & F 16 A one-way SP switch - 1 module complete all as specified and directed Make Legard Cat No: 6755 11 or equvalent in Simens / Crabtree

S & F 6/16 A socket 3 Pin 2 modules module complete all as specified and directed Make Legard Cat No: 6734 55 or equvalent in Simens / Crabtree.

S&F mdoular blank plate module 1 all as specified and directed.

S&F ceiling rose surface bakelite 65mm x 50mm three terminal all as specified and directed

S & F double door Sheet metal enclosures factory made DBs 4 way ,240 volts, protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 200 A Busbar, With Neutral bar, Earthbar and Cable ties for Cable management, Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand / Hager/ L & T

S&F isolators of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) complete all as specified and directed. (Note :- Make of the isolator should be the same as that of DB) for the following (a) MCB Single Pole of 240 volts 5-32 Amps,10 KA Capacity, 'C' series of Make: Legrand /Hager/ L & T

(b) MCB Single pole + Neutral 240 volts, 32 -63 Amps,10 KA Capacity, 'C' series of Make: Legrand ,Cat No: 4086-17 to 20 or equivalent in Simens/ L & T

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cm x 6 mm thick buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to and including GIwire 4mm dia as earth lead up to 7.5 mtr length by means of bolts, nuts check muts and washers etc. of galvanised iron or steel all as shown in electrical plate No. 3 including provn of GI protection pipe light grade of 32mm bore upto 7.5m length and connected earth strip to earthing test point all as shown in electrical plate No. 3 of SSR Part - I 2009 and as specified or indicated and testing on completion including necessary excavation & earthwork in any type of soil, PCC (1:3:6) type C1 chamber, precast slab 50mm thick in cement concrete (1:2:4)type B1 (rein forced with welded steel wire fabric (XPM) of weight not less than 4kg/sqm) with frame, funnel with watering pipe of 20mm bore medium grade, wire mesh and lugs test point etc. complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm connecting with 3 core flexible copper cable of size 1.5 Sqmm all as specified and directed.. Make- CG/Havells/ Orient

Supply and fix hand dryers made of stainless steel body complete with toilet paper holder incl necessary arrangment on wall, voltage 230V, 50 Hz, RPM 12000, connecting with 3 core flexible copper cable of size 1.5 Sqmm all as directed. Make- Kallerians cat part No KH01SS, KH02SS or equivalent make as approved by OEM. complete all as specified and directed.

EXTERNAL ELECTRIC SUPPLY: M&L for sand cushioning for UG cables using dry river sand; gently punning down all as directed and specified. ( Note : For measurement purpose punned thickness shall be considered)

S&L un-reinforced pre cast concrete cable covers CLASS LV type 2, flat size size 250 mm x 150mm x 40mm to be laid transverse to cable etc. all as specified and directed.

Supply Laying and jointing,LT under ground cable of size 10sqm, 2 core, 1100 volts grade, XLPE insulated,armoured with galvanised round steel wire or steel strip, electric power cables heavy duty,with multi stranded aluminium conductor, laid in trenches, ducts, fixed on poles/walls with proper size saddles and clamp laid under roads/path/drain/culverts or encored in GI pipe fixed & testing and commissioning complete all as specified and directed.

Supply and laying in trenches/fixed on pole with necessary clamps, nut, bolts etc GI pipe 40 mm dia light grade including necessary fittings as protection to Cable complete all as specified and as directed.

EXTERNAL WATER SUPPLY: Cutting to existing GI pipe line upto 50 mm dia for taking connection up to 40 mm dia GI pipe including insertion of CI /GITee complete all as specified and directed including Exc & earth Work complete all as specified and directed.

Supply and lay in trenches/or on wall medium grade steel water tubing of size 25mm bore galvanised with all fittings and joints etc complete for 25mm bore GI pipe etc. complete all as specified and directed.

Supply and fix gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for for 25 mm bore etc.complete all as specified and directed.

SHREE RAM BUILD TECH

Mohit Infratech

High Tech Metal India

The new hut furnitures

GUPTA ENGINEERS AND CONTRACTOR

G and G Infratech Private Limited