Maintenance and repair of newly allotted staff quarters at East Colony under ATE/JMP

Item Breakup - A-CPWD DSR-2023

Jamuna sand, with common burnt clay non modular bricks. Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 11.3 with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone Sqm 300 614.2 184260 22 aggregate 11.37S CERAMIC GLAZED TILES 11.37 Providing and laying Ceramic glazed floor tiles of Sqm 200 1096.55 219310 size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 23 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 11.41S VITRIFIED FLOOR TILES LOCO-SHOP-JMP-ENGINEERING/EASTERN RLY Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved 11.41 make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ s q m including grouting the joints with white cement and matching pigments etc., complete. 24 11.41.2 Size of Tile 600x600 mm Sqm 120 1553.45 186414 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 11.56 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in- Charge. 11.56.1 Polished Granite stone slab colour of Black, Sqm 50 4481.3 224065 25 Cherry/Ruby Red or equivalent 12.0 ROOFING 12.37S RAIN WATER SPOUT AND PIPE Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 12.41 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 26 12.41.2 110 mm diameter Metre 50 377.4 18870 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 12.42 conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.1 Coupler 27 12.42.1.2 110 mm Each 20 136.15 2723 12.42.5 Bend 87.5 degree 28 12.42.5.2 110 mm bend Each 20 150.35 3007 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 29 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 1000 333.35 333350 CEMENT PLASTER WITH A FLOATING COAT OF 13.7S NEAT CEMENT 12 mm cement plaster finished with a floating 13.7 coat of neat cement of mix : 30 13.7.1 1:3 (1 cement: 3 fine sand) Sqm 200 439.25 87850 13.16S 6 mm CEMENT PLASTER 13.16 6 mm cement plaster of mix : 31 13.16.1 1:3 (1 cement : 3 fine sand) Sqm 200 300.45 60090 13.44S EXTERIOR FINISHING Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved 13.81 brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 32 13.81.1 Old work (one or more coats) Sqm 3500 62.7 219450 13.87 White washing with lime to give an even shade : 33 13.87.1 Old work (two or more coats) Sqm 3500 22.85 79975 LOCO-SHOP-JMP-ENGINEERING/EASTERN RLY Painting with synthetic enamel paint of approved 13.99 brand and manufacture of required colour to give an even shade : 34 13.99.1 One or more coats on old work Sqm 500 102.8 51400 15.0 DISMANTLING AND DEMOLISHING 15.1S General Demolishing cement concrete manually/ by mechanical means including disposal of material 15.2 within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (including cum 3 2434.25 7302.75 35 equivalent design mix) Demolishing brick work manually/ by mechanical means including stacking of serviceable material 15.7 and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. 36 15.7.4 In cement mortar cum 2 2060.2 4120.4 Dismantling doors, windows and clerestory windows (steel or wood) shutter including 15.12 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 37 15.12.1 Of area 3 sq. metres and below Each 10 367.2 3672 Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres 15.14 height including stacking the material within 50 metres lead : 15.14.1 Of sectional area 40 square centimetres and cum 2 4459.1 8918.2 38 above 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM 21.1 rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 100 495.05 49505 39 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever 21.1.2 required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 118.8 598.6 71113.68 40 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Total 5916438.63