REPAIR REPLACEMENT OF DOORS, WINDOWS, VENTILATORS AND ALLIED WORKS OF BLDGS AND COMPREHENSIVE REPAIR MAINTENANCE OF CERTAIN BLDGS IN ZONE III and IV AT UMROI MIL STN UNDER GE UMROI

Amount

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each, complete all as specified and as directed.

All as per serial item No 1 here in before but for area n.exc. 1.5 Sqm each, complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 Sq. M each and removing from site, complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each and removing from site, complete all as specified and as directed.

S&F pressed steel door frame 125x60 mm with one or more rebated incl necessary fixing lugs hings, lock strick etc, complete as specified and firected.

Material & Labour for PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in filling of pressed steel frame, complete all as specified and as directed.

Supply & Fix Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, (aluminium frame Colour approved by GE) windows, ventilators, partitions etc. with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed.

Supply & Fix Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters (sliding type), aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and as directed.

Material and labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

Supply and fixing 32 mm thick Factory made waterproofing and fire proofing Flush door shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides & both face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed by Eng-in-Charge.

Supply and fixing 2nd Class hard wood glazed and skeleton shutter 35 mm thick, open rebated & prepared to receive glass, gauze, etc. (rebated sash bars) edges of framing plain, chamfered or rounded fittted with cut and mitred beads for securing glass etc size of members of shutters as specifed in SSR Part I, Section 8 clause 8.24 (a) supplied and fitted to chowkhats, complete all as specified and directed by Eng-in-Charge.

Supply and fixing of MS Skelton door shutter with half portion SS net proof and half portion grill including all necessary fitting and fixture as per TD DRG No. BP/MP/AR/01 sheet No 20/32, Complete all as specified and directed by Eng-in-Charge.

Supply & fix galvanished mild steel wire cloth 0.56mm nominal dia and 1.18 mm average width of apperatures, Complete all as specified and directed by Eng-in-Charge.

Supply & fix 100 mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed by Eng-in-Charge.

Supply & fix 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed by Eng-in-Charge.

Supply & fix 150mm aluminum anodised bow handles, complete all as specified and directed by Eng-in-Charge.

Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

S&F in repairs Harrison rails, anodised aluminium alloy, with fixing brackets, stops, rollers etc.complete all as specified and as directed.

M&L for painting to steel Surfaces of any description, over 10cm in width or grith with two coat of synthetic enamel paint over a coat of red oxide, not otherwise described

M&L for Green Marble 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

M&L for 15mm thick rendering in CM (1:4) in two layers mixed with water proofing compound @ 3% by weight of cement in top 5mm thick finishing the surfaces with fair and even without using extra cement including taking down of cement plaster of any description including racking out joints for key scrubing with water etc. complete all as specified and directed.

Supply only integral WPC

M&L for rendering 10mm thick in cement mortar (1:6) on brick or concrete surface finished even and smooth without using extra cement including taking down of cement plaster of any description including racking out joints for key scrubing with water etc. complete all as specified and directed. complete all as specified and directed

M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer, complete all as specified and as directed.

M&L for applying two coats of weather proof paint over a coat of alkali resistant primer including 1.5mm thick wall care putty on newly plastered surfaces of walls including preparation of surfaces, complete all as specified and as directed.

Material and labour for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enemal paint over pink primer, complete all as specified and as directed.

Material & Labour for complete removal of existing old treatment of wall and applying a layer of 1.5mm thick wall care putty and two coats of oil bound distemper over a coat of alkali resistant primer including preparation of surface, complete all as specified and directed.

Material and labour for complete removal with mechanical process & preparation of old decorative surfaces of walls, washing rubbing down and stopping of distempered of existing old treatment of wall and applying 1.5mm thick wall care putty and two coat of weather proof exterior emulation (APEX of Asian paint or equivalent) upto three story building, complete all as specified and directed. Note- 1) All painting will be done through mechanical process(Spray Painting) masking and cleaning of floor,door,windows etc during spray painting. 2) The rate shall be inclusive of Scaffolding

Material & Labour screed bed or bedding layer of cement mortar (1:6) ,15 mm thick for laying floor finishes, complete all as specified and directed.

M&L screed bed or bedding layer of cement mortar 1:4 ,10 mm thick for as in vertical surfaces such as skirting , dados etc, complete all as specified and as directed.

Material and labour for joint free non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.11 sqm but n exc 0.18 sqm (400mmX400mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Material and labour for Preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed.

S&F Aluminium powder coated [Minimum 50 Micron thick] anodised aluminium sliding frame and shutter for windows/ventilation with 92 mm x 31.75 mm x 1.5 mm thick three track section for frames and 40 x 18 x 1.55 mm thick sliding section for shutters of both gauzed and glazed with 4 mm thick tinted glass, aluminium Deco Grill of Model / Design No. DG 104 and stainless steel wire cloth [0.63 mm nominal dia and avg width of aperture 1.40 mm] including necessary jointed, cleats powder coated glazzing clips, powder coated aluminium snap beadings, screw and aluminium fittings, suitable handle, complete all as specified and as directed.

Material and labour for preparing old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enemal paint over pink primer, complete all as specified and as directed.

Supply & Fix 3 mm thick Square/half round 6" to 8" perimeter color coated UPVC rain water gutter for rain water draining in bldgs (Single,double & triple story) including runner drop,elbow drop,clamps etc all including attached downpout of suitable size fitting fixture discharging storm water into PVC SWR pipe of 110 mm dia and similar works including taking down old U/S eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc, complete all as specified and directed. Note: The rate shall be inclusive Scaffolding

Supply & Fix 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including all fittings etc, including taking down old U/S PVC pipe, complete all as specified and directed

Supply & Fix 110mm bore PVC (SWR) bends any radius, complete all as specified and directed

Supply & Fix 110mm bore PVC (SWR) branch pieces, single 'Y' , equal or unequal, complete all as specified and directed

Supply & Fix 110mm bore PVC (SWR) junction single, (single T) equal or unequal, complete all as specified and directed

Demolition of Concrete of any description and in any position not otherwise specifically provided for, complete all as specifed and directed.

Material and labour for 100mm thick PCC 1:3:6 type C2, as in foot path & sub-base, complete all as specifed and directed..

Material and labour for pre-polished colour chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry in flors with grey cement and pigment including 20 mm thick screed bed 1:6, complete all as specifed and directed.

Schedule of Credit

N.V.ENGINEERING

M/s M.D. Syiem

M/s Jaiswal and Co

M/S C.M.V CONSTRUCTIONS