SPECIAL REPAIR TO TILING AND CONNECTED BR WORK AT DINNING HALL KITCHEN BATHROOM MAIN GATE OF INF MESS SM33 AND PROVISION OF GEYSER CEILING EXHAUST FAN AT JCOS ORS SINGLE LIVING ACCN AT INF SCHOOL UNDER GE MIS MHOW

Amount

B/R PORTION :

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified

M&L for applying two coats of first quality oil emulsion distember over a coat of primer over a coat of Acrylic / Water proofing wall Putty on walls complete all as specified . Note:- Putty shall be measured and paid seperately under relevant item.

M&L for preparation of old decorated surface of wall including brooming , scraping down smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying two coats of first quality oil emulsion distemper white/coloured over a coat of Acrylic / water proofing wall Putty (where ever required at site in patches) all as specified and directed by Engineer-in-Charge. Note:- Putty shall be measured and paid seperately under relevan item.

M&L for preparation of old decorated surface of wall including brooming , scraping down smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying one coat of first quality oil emulsion distemper all as specified

M&L for applying two coats of Acrylic Smooth exterior paint of required shade @ 1.67 litre /10 sqm over and including a coat of primer @ 2.20 kg /10 sqm of same make base over a coat of Acrylic / water proofing wall putty all as specified Make: Asian - Apex or other equivalent as approved by GE

M&L for preparation of old decorated surface of wall including brooming , scraping down smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying two coats of exterior weather proof water base emulsion paint white / coloured over a coat of primer of same make over white cement based putty (where ever required in site in patches) all as specified .Note: Putty shall be measured and paid seperately under relevant item . Make: Asian - Apex or other equivalent as approved by GE

M&L for preparation of newly plastered surface of wall and and applying 2mm thick Acrylic / water proofing wall putty in two coats (each coat not less than 1mm thick ) and surface finished even and smooth with sand paper complete all as specified

M&L for applying 2mm thick Acrylic / water proofing Wall putty on walls and surface finished even and smooth with sand paper complete all as specified

Demolition of brick work built in cement mortar of any description including all quions ,arcches , pillars etc complete all as specified

M&L for brick work in cement mortar 1:6 using sub class `B ` modular brick straight or curved on plan exceeding 6.0m mean radius complete all as specified

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement complete all as specified

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of wall / concrete surfaces finished even and fair complete all as specified

M&L for preparation of old painted surfaces of wood / wood based materials exc 10cm in width or girth and applying one coat of synthetic enamel paint all as specified.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified and as directed .

M&L for plain cement concrete 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified

M&L for PCC1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floor, etc complete all as specified

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete all as specified

M&L for scratch free Glazed (Porcelain) vitrified Tile (GVT) / polished glazed vitrified Tile (PGVT) 9mm to 10mm thick (square or rectangular) area of each tile exceeding 1.26 sqm but not exceeding 2.16 sqm (ie) size 800 mm x 1600 mm / 1200 mm x 1800 mm,in floors etc set and jointed in neat cement slurry including providing 5mm spacer as required at site bewtween the tiles and filiing space between tiles with coloured epoxy material and pointed (if required at site) in white or coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed. Make of tile : Superior quality tiles from Kajaria/Somany/Orient Tiles. Note : (a) Size and pattern / texture of GVT (Matt Finish) / PGVT(Glossy Finish) shall be approved by GE (b)Glazed Coating on GVT / PGVTshall not be less than 1mm thick . (c)Colour of epoxy material between tiles and spacing of spacer between tiles shall be approved by GE.

All as per item No 18 above but as in skirting/ dado with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified

M&L for scratch free Glazed (Porcelain) Vitrified Tiles (GVT) / Polished Glazed Vitrified Tiles (PGVT) 9mm to 10mm thick (square or rectangular) area of each tile exceeding 0.34 sqm but not exceeding 0.72 sqm (ie) size 600mm x 600 mm / 600 mm x 1200mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed. Make of tile : Superior quality tiles from Kajaria/Somany/Orient Tiles. Note : (a) Size and pattern / texture of GVT (Matt Finish) / PGVT(Glossy Finish) shall be approved by GE (b)Glazed Coating on GVT / PGVTshall not be less than 1mm thick .

All as per item No 20 above but as in skirting / dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified

M&L for glazed ceramic coloured tiles (Matt / Gloss finish) of size not less than 450x300x7 mm thick as in vertical surfaces such as on wall ,dado,skirtting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 15 mm thick backing coat on fair faces of brick work in cement mortar 1:4 mixed with water proofing compound PD Proof 101 LW (+) of Dr fixit or other equivalant integral water proofing admixture @ 200ml /bag complete all as specified and as directed. Make of tile:- Superior quality tile from Kajaria/Somany/Orient tiles. Note: (a) WPC .PD Proof 101 LW (+) of Dr fixit shall be measured and paid seperately under relevant item. (b) Pattern/Texture and finish of wall tile shall be approved by GE

M&L for scratch free Glazed (Porcelain) Vitrified Tiles (GVT) /Polished Glazed Vitrified Tiles (PGVT) 9mm to 10mm thick (square or rectangular) area of each tile exceeding 2.08 sqm but not exceeding 2.88 sqm(ie ) size 1200mm x 1800 mm / 1200mm x 2400 mm ,in floor / wall etc set and jointed in neat cement slurry including providing 5mm spacer as required at site bewtween the tiles and filiing the space between tiles with coloured epoxy material and pointed (if required at site) in white or coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed. Make of tile : Superior quality tiles from Kajaria/Somany/Orient Tiles. Note : (a) Size and pattern / texture of GVT (Matt Finish) / PGVT(Glossy Finish) shall be approved by GE (b)Glazed Coating on GVT / PGVTshall not be less than 1mm thick .

Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified

M&L for machine cut kota stone slab in flooring 20mm to 25mm thick laid over and including 15mm thick screed bed in cement mortar 1:6 and pointed with cement mixed with pigment to match with the shade of slab including rubbing and polishing complete all as specified

M&L for 18mm to 20 mm thick Granite slab work (table rubbed and polish) of approved quality of required size in floor,wall,cooking platform and like bedded and jointed in grey cement slurry and pointed with coloured cement (1:2) usig marble dust with admixture of pigment to match the shade of granite stone laid over and including 20 mm thick screed bed in cement mortar 1:4 including polishing by using mechanical grinder complete all as specified and directed. Note : Size of Granite slab shall be maximum as available at market /as per site requirement and shall be approved by GE

M&L for 60mm thick machine pressed rubber moulded precast cement concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand and stone dust 50mm thick as in levelling course of interlocking complete all as specified

M&L for chequered cement concrete tiles with grey cement and pigment of size 25cmX25cmX25mm thick ,set jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified

M&L for precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in kerb stone / kerb block ,machine pressed ,bul lnosed shape at top as directed and finished the surface even and smooth including necessary form work /moulding ,fixing, jointing kerb block in cement mortar (1:4) complete all as specified

M&L for preparation of old decorated surfaces of wall by removing existing putty /distemper of any description upto plaster surface ,cleaning the surface with water and dry and applying two coats of Smart care Hydroloc (by Asian) or other equivalent as approved by GE and subsequent application of two coats of Oil Emulsion Distemper over a coat of 2 mm thick Acrylic / water proofing wall putty. Note : (a).Apply first coat of Smartcare Hydroloc (no dilution) with a forced coverage of 4 to 4.5 Sqm Litre and allow the surface to dry for 6-8 hours (b).Apply second coat of Smart care Hydroloc (no dilution) with coverage of 4 to 4.5 Sqm / Litre perpendicular to first coat and allow the surface to dry for 6-8 hours (c) The work of Smartcare Hydroloc treatment shall be got executed through approved expert team of Manufacturers or authorised applicator of Manufacturer.

M&L for preparation of old decorated surfaces of wall by removing existing putty /distemper of any description upto plaster surface ,cleaning the surface with water and dry and applying one coat of Smart care Hydroloc (by Asian) or other equivalent as approved by GE and subsequent application of two coats of Oil Emulsion Distemper over a coat of 2 mm thick Acrylic / water proofing wall Putty . Note :(a).Apply first coat of Smartcare Hydroloc (no dilution) with a forced coverage of 4 to 4.5 Sqm Litre and allow the surface to dry for 6-8 hours (b) The work of Smartcare Hydroloc treatment shall be got executed through approved expert team of Manufacturers or authorised applicator of Manufacturer.

M&L for RCC M-25 grade (design Mix concrete ) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified Note:Reinforcement shall be measured and paid separately under relevant item.

M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping), etc for rough finished surface of concrete complete all as specified

M&L for high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

S&F Mild steel Hollow ,Joist, channel, angle, tee or tubular Section work in tubular trusses, purlins, rafter, tubuler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified

S &F mild steel framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165 complete all as specified

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified

S&F r Anodised aluminium snap grid size 605mmx605mm frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F Exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified. (Note: Frame work for ceiling shall be measured and paid separately under relevant item)

S&F Gypsum Board 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre on GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finish Ceiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.

S&F PVC prelam sheet wall / ceiling paneling of thickness minimum 5mm on inner frame work of 50 mm wide strips of 5mm thick .The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more than 200mm. A groove of 2mm shall be left at the joints of two panel for aesthetic looks. The exact size of the panel and correspondingly of grid may vary depending on the size of wall. Optionally a strip of 5mm thick PVC sheet of width 75mm feathered at edges shall be struck at the places where two panels are jointed, using solvent complete all as specified and as directed

S&F fabricating coloured powder coated aluminium frame work,door shutter ,windows , ventilators, partisions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified

S&F aluminium coloured power coated window and ventilator shutters, sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed.

S&F aluminium coloured power coated door shutters, aluminium section weighing mininimum 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. .

S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition including necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed.

M&L Veneered decorative 18 mm plywood, grade 1 (with BWR resin) with decorative laminate minimum 1mm thick on both faces; fixed with screws to timber frame work as in cupboard shelf/partition complete all as specified and drected by Engineer -in-charge. Note : Colour and texture of laminate shall be approved by GE

S&F 12mm thick Frosted Toughned Glass fixed on patch hinges / pivot for smooth functioning in door shutter including stainless steel handle of 8 inches long and mortice locking arrangement complete all as specified

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded coloured PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and coloured PVC sheet for top rail, lock rail & bottom rail. Panelling of coloured PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed

S&F Aluminum anodized barrel tower bolts of 150 mm long extructed section

S&F aluminum alloy handles fabricated anodised of 150 mm long

S& F Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) of three layered hoisted and fixed in position all as specified in SSR part I complete

S&F 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,complete all as specified

All as per item no 56 above but 20mm bore

S&F CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified .Make:Plumber/Essco of jaguar(Economical Range)

S&F fancy type chromium plated 15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified . Make : Plumber/Essco of jaguar(Economical Range)

S&F CP toilet paper holder with Lid Cover complete all as specified .Make : Plumber/Essco of jaguar(Economical Range)

S&F vitreous china wash basin white table top of size 520x360x125 mm including 32mm brass CP waste coupling complete all as specified and as directed . Make-:Jaquar (Cat Part No.- FLS-WHT-5931) or other equivalent as approved by GE

S&F Vitreous China Urinal, Half stall type,white with grating and union for discharge pipe, urinal spreader including all fixing accessories as required and waste pipe complete all as specified and as directed Size of Urinal: 355x340x535 mm Make :Jaquar Cat Part No. URS-WHT-13261H or other equivalent as approved by GE

S&F vitreous china wall hung European wash down water closet pedestal pattern of size 370x540x410 mm white inclusing 'S" trap with PP Soft Close Seat Cover, Hinges, accessories set, including concealed flushing cistern & Chromium Plated Control Plate and flush pipes complete all as specified and as directed . Make: Jaquar ,Cat Part No: CNS-WHT-959SPP or other equivalent as approved by GE

S&F vitreous china Single Piece WC (P trap) of size 360x655x765 mm white with UF soft close slim seat cover, hinges, dual flush Cistern Fitting, Fixing Accessories and flush pipes complete all as specified and as directed . Make Jaquar (or equivalent) ,Cat Part No: LYS-WHT-38851P180UFSM

S&F health faucet with flexible pipe of one metre length including wall hook for EWC complete all as specified Make :Plumber / Essco of jaguar (Economical Range)

S&F PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified

S&F PVC (SWR) pipes 100mm bore single socketed in any length with rubber ring joints laid on wall / floor complete all as specified .

S&F PVC ( SWR) bends any radius bore of 100 mm

M&L for salt glazed stoneware drain pipe of 150mm internal dia laid in trenches and jointed in cement mortar (1:1) complete all as specified

M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in concrete bed to drain pipe of 150mm size internal dia of pipe including packing under and haunching against the sides of pipe all as specified after they are laid and tested complete all as specified and directed .

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in precast coverslab for manholes and soak well cover slab etc set in cement mortar (1:4) including necessary form works/moulds as required complete all as specified .Note:- Reinforcement shall be measured and paid separately under relevant item

M&L for plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in foundations, filling , mass-concrete and coping complete all as specified

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation or for shafts, wells, cespits, manholes pier hold etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard /dense soil complete all as specified

Excavating over areas not exceeding 1.5 m deep and getting out in hard/dense soil complete all as specified

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified

Returing, filling in trenches in hard/dense soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified

S&F galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified

E/M PORTION :

M&L for Point wiring in repairs with FRLS PVC insulated PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in existing pvc conduit / pvc casing caping in ceiling and making good the disturbed surface of wall to match with existing including 1.5 sqmm green FR LS PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet for mounting switches, sockets, fan regulators etc for the following :-

One light/fan point controlled by one switch

One 5amps socket out let point controlled by one switch on same board with other switches.

One 5amps socket out let point on independent board controlled by one switch.

All as per item No 78 here in before but using FR LS PVC insulated unsheathed 2.5 Sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green FR LS PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

S&F in repairs switch piano flush button single pole one way 6 Amp 240 volt

S&F in repairs socket outlet flush type 5 pin, 6 amps, 230 volts

S&F in repairs switch piano flush button single pole one way 16 Amp 240 volt

S&F in repairs socket outlet flush type multipurpose 2 in 1, 3 pin 6 and 16 Amp, 230 volts

S&F in repairs ceiling rose surface bakelite three terminal

S&F in repairs integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro

M&L for Sub main wiring with two runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface to match with existing including PVC insulated unsheathed FR LS 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly from main distribution board including taking down the existing submain wiring of any description complete all as specified .

M&L for Sub main wiring with four runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface to match with existing including FR LS PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly from main distribution board including taking down the existing submain wiring of any description complete all as specified .

Note for Sl item No 86 and 87 : 2/4 runs of 6 sqmm single core multistandred copper conductor and one run of earth conduit conductor and one length of PVC conduit and its accessories shall be measured as one unit length.

S&F in repairs double door TPN DBs 8 way powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified Make : HPL/L&T/HPL/Havells

S&F in repairs double door SPN DBs 8 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified Make : HPL/L&T/HPL/Havells

S&F in repairs MCB TPN 50 to 63 amps 10 KA, C -series including connection with suitable size aluminium/copper lugs complete all as specified. Make : HPL/L&T/HPL/Havells

S&F in repairs MCB SPN 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified Make : HPL/L&T/HPL/Havells

S&F in repairs MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified .Make : HPL/L&T/HPL/Havells

S&F in repair Sheet metal earth plug socket, single pole with MCB SP 20/32 Amps 240 volts complete all as specified . Make: Havells, Legrand, Indo-Asian

S&F in repair sheet metal earth plug socket triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB ,triple pole with MCB SP 20 /32Amps 415 volts complete all as specified Make: Havells, Legrand, Indo-Asian

M&L for Point wiring using approved colour coding as as per IS in repairs with FR LSH PVC insulated PVC unsheathed electric cable 1100V grade ISI 694 marked down through single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping will be used) & 1.5 sqmm green FR LS PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet for mounting switches, sockets, fan regulators etc for the following .

One light point/fan point controlled by one switch

All as per item No 95 here in before but using FR LS PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green FR LS PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

S&F switch piano flush button single pole one way 6Amp 240 volt

S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal, 230 volts

S&F ceiling rose surface bakelite three terminal

S&F double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete

S&F MCB SPN 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete

M&L for Sub main wiring with two runs of single core FR LS H PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including FR LSH PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly from main distribution board complete all as specified. Make of PVC conduit/Casing Caping:- Plaza/Finolex/Polycab/Kalinga/Jindal/Asian Make of cable : Anchor/Polycab/HPL/Havells.Note for Sl item No 86 : 2 runs of 6 sqmm single core multistandred copper conductor and one run of earth conduit conductor and one length of PVC conduit and its accessories shall be measured as one unit length.

S&F ceiling fan230 v,1200mm sweep complete with blades including suitable length of down rods as per site requirement , electronic regulator and accessories ,mimimum air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) aall as specified .Make: Havells,Crompton,Bajaj

S&F Exhaust fan 230V, 50 Hz, RPM 1200, Copper winding of 250mm sweep made of sturdy Engineering plastic complete with louvers / shutter complete all as specified Make: Havells,Crompton,Bajaj

S&F electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW ,25 litres capacity , BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc including provide all electrical conection and plumbing fittings as directed by Engineer-in-Charge. Make:- Havells,Crompton,Bajaj

Note :- Contarcor will provide all T&P for repair/replacement of Lights & point wiring at Wall & ceiling at any Height. No extra cost will be given to contractor for T&P and Ladder etc required for repair/replacent of Lights & point wiring .

M/s Narendra kumar Agrawal

kriti construction

M/S DADISA CONSTRUCTION

Jamna Constructions