SPECIAL REPAIRS TO ROADS UNDER GE (NORTH) BANGALORE.

Amount

Repair to pot holes any depth not exceeding 1 Sqm depth including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm in depth, making good by applying a tack coat of bitumen emulsion (RS-1, grade confirming to IS :8887 at 3.00 kgs/10Sqm), putting in premixed bituminous macadam, well rammed and sealed with binder 9.8kg per 10 Sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (Including supply of premixed macadam, binder and chippings), depth of potholes exceeding 30mm complete all as specified and as directed.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. all as specified and as directed.

Material and Labour for applying tack coat with bitumen emulsion (RS-1, grade confirming to IS :8887 at 3.00 kgs/10Sqm) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503 complete all as specified and as directed.

Scarifying or picking graveled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm and depth exceeding 50mm and not exceeding 100 mm etc all as specified and as directed.

Material and Labour for laying dense bituminous macadam with minimum 40-60 TPH batch type HMP using crushed aggregate of specified grading II (26.50mm nominal size) premixed with bituminous binder VG-30 @ 4.50% by weight of total mix and cement as a filler, transporting the hot mix to work site, laying, rolling to achieve and desired compaction as per MORTH specification clause No. 505 complete all as specified and as directed.

Material and Labour for Bituminious premix semi dense asphaltic concrete, 30mm consolidated thickness with 5.5% binder content (Paving bitumen of VG-30) by weight of total mix, mixed in hot mix plant, rolled with tandem vibratory roller and compacted to required camber and gradient by using mechanical paver complete all as specified and as directed.

Material and Labour for preparation of new or previously treated surfaces to receive thermostatic paint laying of road marking with hot applied Thermoplastic compound with Reflectorizing glass beads on Bituminous surface, 2.5mm thick including reflectorizing glass beads @ 250 gms per sqm area is exclusive of surface applied glass beads as per IRC:35-1997. The finished surface to be level, uniform and free from steaks and holes all as specified and as directed. (Make: Asian Paints or equivalent)

Supply and fixing in repairs 100% water proof solar road delineator pole mounted (Pole size 48mmX1000mm duly powder coated) fixed in repairs fixing the same in M 15 grade (type-I) block of size 20x20x30cm(deep) complete all as specified and as directed. Make:- DA-112 of Dark eye or equivalent of Sun Eyez/ M/S Texla Plastic & Metal Pvt Ltd./M/s Automat Road Safety Pvt Ltd/3M

Supply and fixing in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Monocrystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and as directed. Make:-Dark eye or equivalent of Sun Eyez/ M/S Texla Plastic & Metal Pvt Ltd./M/s Automat Road Safety Pvt Ltd/3M

PATEL CONSTRUCTION

G VENKATESH