SPECIAL REPAIRS TO BLDG NO P-166 MD ACCN (MES QTRS) AT DEFENCE COLONY UNDER GE STM CHENNAI

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thick (below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M & L non skid coloured ceramic tiles each tile area (square/rectangle) exc 0.06 Sqm but n.exc 0.11 Sqm tile thickness 7 to 8 mm, in floors etc. set and joined in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer with CM 1:6, 15 mm thick for laying floor finishes complete all as specified and as directed.

M & L glazed ceramic tiles coloured 350 x 250 x 7mm / 450 X 350 X 7mm thick on vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile including 10mm thick in CM 1:4 as backing coat for fixing dado tiles complete all as specified and as directed.

M & L Roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust, etc., brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and as directed.

M & L non skid ceramic coloured tiles, area of each tile exc 0.18sqm and n.exc 0.38sqm (square/rectangle) 7 to 8mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick cement screed in CM 1:6 complete all as specified and as directed.

All as per item No.6 here in before, but on vertical surfaces including 10mm thick CM 1:4 as in backing coat of dado/skirting complete all as specified and as directed.

M & L chequered coloured cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 15mm thick cement screed bed in CM 1:6

All as per item No.8 above but bull nosed as in treads inclusive of screed bed in C.M 1:4, 15mm thick complete all as specified and as directed.

All as per item No.8 above but on vertical surfaces inclusive of back coat in C.M 1:4, 10mm thick complete all as specified and as directed.

M & L PCC 1:3:6 75mm thick Type C-2 (using 40mm graded stone aggregate) as in plinth protection/hard standing finishing top surface even and smooth without using extra cement complete all as specified and as directed.

M & L for providing 100mm thick, PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floors and paving's etc. complete all as specified and as directed.

M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M & L machine pressed Pre cast rubber finished coloured PCC interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade of cement concrete of with grey cement and pigment complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M & L mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-410-W(Gde-E-250) quality- B complete all as specified and as directed.

Dismantling of (corrugated, semi-corrugated, etc.) steel sheeting in roof coverings complete all as specified and as directed.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L preparing surfaces of new steel iron work exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc.& making good, cutting n.exc 10 cm girth complete all as specified and as directed.

Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls /ceiling or laying in floors of outer dia 20mmm complete complete including taking down the existing pipes of any type complete all as specified and as directed. Note:- The quoted rate deemed to include for cutting chases in walls and making good the surface as per existing finish.

Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls /ceiling or laying in floors of outer dia 25mm complete complete including taking down the existing pipes of any type complete all as specified and as directed. Note:- The quoted rate deemed to include for cutting chases in walls and making good the surface as per existing finish.

Supplying and laying of brass elbow of 20mm for CPVC pipe complete all as specified and as directed.

Supplying and laying of brass Tee of 20mm for CPVC pipe complete all as specified and as directed.

Supplying and laying of brass Elbow (3/4 x 1/2) of CPVC pipe outer diameter of 20mm complete all as specified and as directed.

Supplying and laying of brass elbow for CPVC pipe outer diameter of 25mm complete all as specified and as directed.

Supplying and laying of brass Tee for CPVC pipe outer diameter of 25mm complete all as specified and as directed.

S & F in repair Vitreous China wash down water closet (pedestal pattern), white (excluding flushing cistern and flush pipe) including Pedestal pan and trap, seat cover connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc., complete all as specified and as directed.

S & F in repairs vitreous China wash basin, white, flat back, size 550 x 400mm including 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

M & L in repairs 10 litres capacity PVC low level flushing cistern including flush pipe complete with ISI marked body and ISI marked syphon complete all as specified and as directed.

S & F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S & F in repairs bib cock, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs bib cock two way double Handle with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed complete all as specified and as directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S & F in repairs fancy type chromium plated angle cock long body complete all as specified and as directed.

S & F brass chromium plated wall mixer 2 in 1 for mixing hot & cold water screwed down for iron pipe & fixed with provision for connection to over head shower with bend pipe complete all as specified and as directed.

S & F swan neck bib taps for sink brass chromium plated, screwed down, high pressure, with lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore complete all as specified and as directed.

S & F in repairs pillar taps fancy taps brass chromium plated, screwed down, high pressure, with lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore complete all as specified and as directed.

S & F stainless steel Soap Dish

S & F stainless steel Towel rail 600mm long & including Chromium plated brass screws & wooden/ plastic cleats complete all as specified and as directed. (Minimum weight 190gms)

S & F in repairs stainless steel 125mm shower rose with swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S & F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever CI brackets and connecting union to pipe, overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm including 40mm dia brass cp waste coupling.

S & F in repairs kitchen plate rack made stainless steel 0.8mm thick complete of size not less than 900 x 750 x 200 mm, duly assembled and fixed to wall with wall screws/ fasteners complete all as specified and as directed.

M & L machine cut Granite slab 20mm thick over cement screed base laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete including 20mm thick cement screed in CM 1:6 complete all as specified and as directed.

M & L Rounding to edges of granite stones slab one edge,such as in steps, cooking platform and other similar situation complete all as specified and as directed.

S & F in repairs 75mm UPVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

M & L for 75mm UPVC (SWR) pipes of Type 'B' single socketed in any length with rubber ring joints, laid in trenches or walls complete all as specified and as directed.

S & F UPVC (SWR) bends any radius 75mm bore with access door complete all as specified and as directed.

S & F UPVC (SWR) vent cowl 75mm bore complete all as specified and as directed.

S & F UPVC (SWR) branch piece, single (single T) equal or unequal 75mm with access door complete all as specified and as directed.

M & L in repairs for 110mm UPVC (SWR) pipes of type 'B' single socketed in any length with rubber ring joints, laid in trenches or walls complete all as specified and as directed.

S & F UPVC (SWR) bends any radius 110mm bore with access door complete all as specified and as directed.

S & F UPVC (SWR) vent cowl 110mm bore complete all as specified and as directed.

S & F UPVC (SWR) branch piece, single (single T) equal or unequal 110mm with access door complete all as specified and as directed.

S & F ISI marked rotational moulded polyethylene water storage tanks 1000 liters capacity (cylindrical vertical with closed top) 3 layeredhoisted and fixed in position all as specified in SSR Part I. including 20mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms complete all as specified including dismantling of existing PVC water tank complete all as specified and as directed.

S & F of 25mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed complete all as specified and as directed. (Minimum weight 25mm-455gms)

S & F in repairs 25mm bore gun metal globe or gate, valves with iron screwed both ends for iron pipe & fixed complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M & L Mild steel TMT bars of 6mm to 8mm dia and over of grade Fe 500, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete all as specified and as directed.

M & L providing precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slabs, shelves and set in cement mortar 1:4 complete with joints to match complete all as specified and as directed.

M & L for Reinforced cement concrete (Nominal mix) of Type B-1 1:2:4 (20mm graded stone aggregate) as in slabs supported by walls complete all as specified and as directed.

M & L Use and waste formwork to soffits of suspended slabs such as roof slabs, landings,rough finished surfaces of concrete flat complete all as specified and as directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkat or frames with shutters (without taking off shutters) from the frame exc 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed.

S & F second class hard wood plain, solid, straight chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F second class hard wood 30mm flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F FI 25 x 3mm for hold fasts Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hook for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters knee piece inserts; plate washers & similar small articles conforming to Fe 290 Gde E-165 complete all as specified and as directed.

Treating small articles such as stop, covers, gully gratings, holdfasts, ends of post, backs of chowkat, etc., area n.exc 0.1 sqm each treated with tar or coal tar black paint complete all as specified and as directed.

M & L second class hard wood 30mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc. divided into squares with plain chamfered or rounded and rebated sash bars any numbers all as per Clause No.8.24 (b) of SSR part-I 2009 complete all as specified and as directed.

S & F for factory made UPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and both glass/gauzed pane glazing bead of appropriate dimension to accommodate both glazed and gauzed shutter (outside glazed shutter and inside mesh shutter) (Area of window any sqm.) comprising of UPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and as directed. (Glass/gauzed shall be paid separately) Note:- For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to UPVC window shutters complete all as specified and as directed.

M & L sheet glass 4mm thick, ordinary quality and glazing fixed to UPVC window shutter in squares n exc 0.5 sqm in each pane complete all as specified and as directed.

M & L Figured glass 4mm thick, pin head type and glazing fixed to UPVC window shutter in squares n.exc 0.5 sqm in each pane complete all as specified and as directed.

S & F in repairs prelaminated particle board, Exterior grade, prelaminated both sides with decorative choice lamination, 18/19 mm thick, fixed with screws to timber frame work as in shelves/ cupboard shutters and partitions complete all as specified and as directed.

M & L 6mm thick teak wood lipping for external of 18/19 thickness of board complete all as specified and as directed.

S & F 30mm continuous (piano hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed.

S & F 100mm Hasp & staple, safety type, aluminium with mild steel hinges pin including bolt to hinges plate & fixed with screw complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in opening including making good to the jambs as per specification complete all as specified and as directed. Note:- The quote rate shall be inclusive of following:- (i) Existing/new wall edges shall be finished properly in cement plaster in CM 1:4 including S & F of 6 Nos wooden plugs for fixing door frame size n.exc 17 sqcm average sectional area and 100mm long. (ii) Frame shall be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS chromium plated Screw, 3 each on either side

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S & F in repairs stainless steel curtain rods of 25mm dia (Drapery rods) heavy duty complete all as specified and as directed. Note:- SS brackets and finials shall be fixed under Srl item-82. Rate quoted deemed to include fixing of the same.

Supply only stainless steel brackets for 25mm dia curtain rods complete all as specified and as directed. Note:- SS brackets and finials shall be fixed under Srl item-82. Rate quoted deemed to include fixing of the same.

S & F stainless steel decorative finials for 25mm curtain rods complete all as specified and as directed.

S & F SS butt hinges,100mm medium weight, cold rolled complete all as specified and as directed.

S & F extruded aluminium alloy handles,150mm fabricated type anodized complete all as specified and as directed.

S & F extruded aluminium alloy handles,100mm fabricated type anodized complete all as specified and as directed.

S & F Aluminium, 150mm anodized, barrel tower bolts extruded section complete all as specified and as directed.

S & F Aluminium alloy, anodized, 250mm sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S & F Mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be measured and paid separately). Note:- For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F mild steel framed work such as grills, gratings framed guard bars, end of bars forged or shouldered or riveted in to spikes conforming Fe.290 Gde-E-165

Taking down cement or cement lime plaster, on brick or stone walls, ceiling including raking out joints, hacking for key, scrubbing down with water, etc. Any description complete all as specified and as directed.

M & L rendering 15mm thick on other than fair faces of brick work or concrete surfaces of wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M & L Rendering 15 mm thick in CM 1:4 on wall mixed with water proofing compound as per manufacturers instruction, finished plastered surface even and smooth w/o using extra cement complete all as specified and as directed. Note:- WPC will be measured and paid separately.

M & L rendering 10mm thick on fair faces of concrete surfaces of ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Complete removal of existing treatment washing, rubbing down and stopping of white wash/colour wash /cement base paint /distempered any description on wall surfaces complete all as specified and as directed.

M & L applying two coats of oil bound distemper white or tinted on walls complete over a coat of wall primer and two coats of wall care putty to obtain uniform smooth surfaces complete all as specified and as directed.

M & L applying two coats of exterior emulsion weather proof paint over one coat of external wall primer over two coats of exterior wall care putty complete all as specified and as directed.

M & L preparing newly plastered surfaces of ceilings and applying three coat of white wash to match with the existing surfaces complete all as specified and as directed.

M & L preparing newly plastered surfaces of walls and applying two coats of Oil bound distemper on untreated plastered surfaces of walls over a coat of wall putty and primer including necessary preparation of surfaces complete all as specified and as directed.

M & L preparing newly plastered surfaces of walls and applying two coats of exterior grade weather proof paint on untreated plastered surfaces of walls over a coat of putty and primer including necessary preparation of surfaces complete all as specified and as directed.

Preparing of old ceilings surfaces and applying one coats of white wash to match with the existing surfaces complete all as specified and as directed.

M & L painting new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

Removing the existing roof treatment of any description completely and brushing the cleaned surfaces of concrete with neat cement slurry @ 3Kgs of cement per sqm complete all as specified and as directed remove all the debris from site and rubbish off the premises complete.

M & L 25mm (average thick), PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate as in levelling course over the roof slab all as directed.

M & L 10mm thick cement plaster in CM 1:3, mixed with water proofing compound over the levelling course while the concrete is green, finished even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

Supply only Liquid water proofing compound

M & L for APP Modified prefabricated five layer water proofing membrane, not less than 3 mm thick and weighing not less than 3.80 kg/sqm reinforced with non woven polyester matt black finished over compatible primer @ 0.3 Ltrs per sqm, and a bonding bitumen of VG-10 at 1.20 kg/sqm torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint @ 0.10 litre/sqm over a coat of blown bitumen 85/25 grade @ 1.20Kg/Sqm over the membrane. The Overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage including preparatory work. Note:- The work shall be carried out by authorized applicators of manufacturers

Demolition brick work built in cement mortar including all quoins, arches Pillars etc. complete all as specified and as directed.

Demolition of unreinforced cement concrete in any position and in description not otherwise provided for

M & L plain cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in water tank staging, etc. complete all as specified and as directed.

M & L Brick work with fly ash bricks old size straight or curved on plan exc 6 mean radius, built in cm 1:4 complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M & L for Wiring complete with 1.5 sqmm FRLSH grade single core PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories concealed in wall, making good disturbed surfaces of walls and fixed on ceiling etc. including terminal boxes suitable for modular switches for housing the switches, switch sockets outlets, fan regulators, etc., including provn of 1.5 sqmm FRLSH grade PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :- Note:- The quoted rate deemed to include cutting chases and making good to surface as per existing finishes.

One light point controlled by one switch

One fan point controlled by one switch

One Exhaust fan point controlled by one switch

One 3 pin 5 amps switch socket on same board along with other switches.

One 3 pin 5 Amps switch socket on independent board

One bell point controlled by bell push switch on independent board.

All as per item No.115 here in before but with 4 Sqmm single core FRLSH grade PVC cable including for earth continuity conductor for one 3 pin 15 amps switch socket outlet on independent board complete all as specified and as directed.

Taking down sub main wiring of any size and type including PVC conduit removing to stores or taken as credit and making good the disturbed surfaces of wall, etc. complete all as specified and as directed.

M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 10 sqmm including one run of 10 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories concealed in wall and connecting to common earth dolly including taking down old unsv complete all as specified and as directed. Note:- The quoted rate deemed to include cutting chases and making good to surface as per existing finishes.

M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories including accessories concealed in wall, making good disturbed surfaces on walls and connecting to common earth dolly complete all as specified and as directed. Note:- The quoted rate deemed to include cutting chases and making good to surface as per existing finishes.

S & F Ceiling rose round poly corbonate 65 mm x 50 mm two to three terminals all as directed.

S & F Modular Switch flush DIRECT TO FIT press type 10 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed.

S & F Modular Switch flush DIRECT TO FIT press type 16/20 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed.

S & F Modular Socket flush DIRECT TO FIT press 10 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed.

S & F in repairs Modular Socket flush DIRECT TO FIT press type 16/20 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed.

S & F in repairs Modular Fan step regulator, 120W - 1 module for ceiling Fan of 1200 mm sweep complete all as specified and as directed.

S & F in repairs Modular white cover with plate with frame 2 module including flush box matching with white cement work if necessary complete all as specified and as directed.

S & F in repairs Modular white cover with plate with frame 3 module including flush box matching with white cement work if necessary complete all as specified and as directed.

S & F in repairs Modular white cover with plate with frame 6 module including flush box matching with white cement work if necessary complete all as specified and as directed.

S & F in repairs Modular white cover with plate with frame 8 module including flush box matching with white cement work if necessary complete all as specified and as directed.

S & F 30W bldg security light fitting including suitable GI bracket and clamps nuts etc. with best in class design and robust heat sink along with minimum IP-65 rating and surge protections for long lasting performance including taking down old unserviceable light fitting complete all as specified and as directed. Make:- Havells Cat No LHETAVU7PA70030/ Bajaj Cat No BCLST 30W LED/ Crompton Greaves Astra Neo Cat No LSTS-30-CDL/NL-M

S & F in repairs of modular clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 230 Volts 20/32 Amps complete all as specified and as directed.

S & F in repairs MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 6 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and as directed.

S & F in repairs MCB DP, 240 Volt, 32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and as directed including taking down old one. Make:- Havells /L&T/ Legrand/ ABB

S & F in repairs MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one. Make: Havells /L&T/ Legrand/ ABB

S & F in repairs 40W LED aluminium batten type high wattage decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient complete all as specified and as directed. Make:- Havells Cat No LED Pride plus LHEXACP7IN1J040/ Bajaj Cat No BPTX 40W LED 4F WH/ Crompton Greaves Cat No CCS-100-40-65-HL2-DP-NWH

S & F in repairs 10W LED batten type decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient complete all as specified and as directed. Make:- Havells Cat No LED Pride Plus LHEXACP5IN1W010/ Bajaj cat No BCLSB 10 WH or equivalent

Taking down old ceiling fan/ Exhaust fan and kept in MES store where complete all as specified and as directed.

S & F in repairs/ replacement exhaust fan made of steel complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.

S & F in repairs/ replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm complete all as specified and as directed.

S & F BLDC ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep 3 Star rating complete all as specified and as directed.

Supply, Fabricate, install, connect, test and commissioning energy meter EB type panel board , indoor type, powder coated, compartmentalised for each meter with MCB fabricated with 2 mm thick mild steel and suitable sized pressed steel frame work, with hinged type door and locking arrangements, chamber for aluminium busbars , provision of separate compartment and cutting for mounting existing KWH meters and provision of transparent glasses -04 Nos with following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated 6 Sqmm FRLS copper wire with existing system and complete mounted on suitable size angle iron complete all as specified and comprising of the following :-

(i) 4 Nos busbar of equal size of Aluminium conductor with PVC coloured heat shrinkable type sleeves continuous rating of 200 Amps mounted on fiber reinforced insulator.(1set), with LED indication lamps on incoming side. (ii) Incoming - MCCB thermal magnetic release type of capacity 63 Amps, 4 pole, 415 volts, 50 Hz, 16 KA. - 01 Nos (iii) Outgoing - MCB single pole & neutral, 240 volts, 40 Amps. - 04 Nos (iv) Outgoing - MCB single pole & neutral, 240 volts, 10 Amps - 01 Nos

Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No.3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B-1 in chamber RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and as directed.