Special Repair and Maintenace of Hosiery Factory at Kalpeni

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. 1:3:6 or richer mix(LE)

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area beyond 3.00 sqm

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead :Cement mortar 1:4

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Finishing walls with water proofing cement paint of required shade:Old Work(one or more coats applied @ 2.2.kg/10sqm)over priming coat of primer applied @0.80litres/10Sqm complete including cost of priming coat

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This inclues joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. For External work

32 mm nominal bore

50 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This inclues joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work, including cutting chases and making good the walls etc.)

Providing and fixing CP brass bibcock of approved quality and manufacture complete. 15 mm nominal bore. . (Cera or equivalent)

Providing and fixing CP brass stopcock of approved quality and manufacture complete. 15 mm nominal bore. . (Cera or equivalent)

Providing and fixing CP brass angle cock of approved quality and manufacture complete.15 mm

Providing and fixing health faucet of approved quality and manufacture complete.

Providing and fixing GM full way wheel valve of approved quality and manufacture complete. 25 mm nominal bore

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work, 110mm nominal bore

Providing and fixing on wall face PVC soil waste and vent Pipe 75mm dia pipes

Providing and placing on terrace ( at floor level ) polythene water storage syntex tank ISI : 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and over flow pipe but without fittings and the base support for tank 500 lit capacity.

Providing anf fixing white vitrous China water closet Pedestal pan (European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required. White EWC pan with plastic seat and lid.

Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. 13.2.1 White vitreous China Flat back wash basin 550x400mm with one 15mm C.P. brass pillar tap.

Providing and fixing mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers. (Cera )(Model No.5561 Mirror size 700x500mm.

Providing and fixing PTMT towel rail with brackets fixed to wooden cleats with CP brass screws with concealed ritting arrangements of approved quality and colour. 600 mm long towel rail brackets with total length of 645 mm,width 78mm and effective height of 88 mm ,weighing not less than 190 gms. (Cera).

Providing and Fixing PTMT liquid soap container109 mm wide,125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour,weighing not less than 105 gms, (yking ). )

Providing , laying and jointing PVC pipes grade 'A' with stiff mixture of 1:3 (1 cement 3 M. sand )including testing of joints etc.complete. 110 mm diameter

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer- in-charge. (Glazing and panelling to be paid for separately):For fixed portion.

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer- in-charge. (Glazing and panelling to be paid for separately):

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12mmthick prelaminated particleboard flat pressed three layer or graded wood particle board conformingtoIS:12823Grade1TypeII in panelling fixed in aluminium doors,windows shutters and partition frames withC.P.brass/stainless steelscrewsetc.complete asper architecturaldrawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing glazing in aluminium door,window,ventilator shutters and partitions etc.with EPDM rubber/neoprene gasket etc.complete asper the architectural drawings and the directions of engineer-in-charge. With float glass panes of 5.5 mm thickness

Providing and fixing aluminium grills (anodised transparent or dyed to required shade according tiIS:1868with minimum anodic coating of gradeAC15) approved design/pattern,with approved standard section and fixed to the existing window frame withC.P.brass/stainless steel screws@200mm centre to centre,including cutting the grills to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section aroud the opening,all complete aspe rrequirement and directionofEngineer-in-charge

Steel work welded in built up section / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer usin’g structural steel etc. as required. In grating, frames, guard bar, ladder, railings, brackets,gates and similar works.

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m2

Providing and fixing aluminium casement windows fastener of required length or aluminium windows with necessary screws etc. complete Powder coated minimum thickness 50 micron aluminium

Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge -charge. Powder coated minimum thickness 50 micron aluminium.

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position-I class Karimaruthu or equivalent ( hold fast lugs or dasg fastener shall be paid for separately )

Providing and fixing Flush doorshutters confirming to IS:2202 (part.I) decorative type,core of block board construction frame of first cladd hard wood and well matched firdt class teak 3 ply veneering with vertical grains or cross band s and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless steel butt hinges with necessary screws

Zayeen Mohammed C G

MOHAMMED NAVAB SHAH C G