GE(S) BTD TOKEN NO 93 OF 2023-24 PROVISION OF CERTAIN SPECIAL REPAIR AND REVENUE WORKS UNDER AGE BR I AND AGE EM IV UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION

Amount

Excavation over areas not exceeding 1.5 mtr deep in soft/loose soil and getting out of soil complete all as specified and directed.

Exacavation of areas exceeding 1.5 mtr and not exceeding 3.0 mtr deep in soft/loose soil and getting out of soil complete all as specified and directed.

Exacavation of areas exceeding 3.0 mtr and not exceeding 4.5 mtr deep in soft/loose soil and getting out of soil complete all as specified and directed.

M & L for PCC 1:3:6 type B-2 using 40mm graded crushed stone aggregates as in foundation filling, sub-base and mass concrete complete all as specified and directed.

M & L for PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregates as in foundation filling, sub-base and mass concrete complete all as specified and directed.

M&L 40mm thick cemement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer all as specifed

M & L for hard core of broken bricks of gauge not exceeding 63 mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and rammed complete all as specified and directed.

M & L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 metre mean radius in CM 1: 4 complete all as specified and directed.

M & L for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4 complete all as specified and directed.

M & L for loose filling with broken bricks of gauge 80 to 150mm in sokage pits, sokage wells complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200 mm thick for rough finished surfaces complete all as specified and directed.

Use and waste of form work to sides of concrete flats and similar work exc 10 cm but not exceeding 20 cm wide for rough finish surface complete all as specified and directed.

S & F mild steel TMT bars 6 to 8mm mm dia cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No. 13 here-in-before but 10mm dia and over complete all as specified and directed.

S & F MS rungs of 20mm dia bar etc complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick works masonry or concrete surfaces in CM 1:4 finished the surface even & smooth without using extra cement complete all as specified and directed.

M & L for RCC M-25 Design Mix as in slabs supported on walls, beams & columns in roofs, balconies and in shelves and the like complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick soft/loose soil complete all as specified and directed.

Removal of excavated material n.exc 50 mtr away depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

S&F cast iron sand cast 100mm size soil waste or vent pipe without ears with cement joint laid in wall/floors/trenches complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for foundation etc for shaft, wells, cesspits, man holes, septic tanks etc, not exceeding 10 sqm on plan & not exceeding 1.5 mtr in depth in soft/loose soil and getting out of soil including trimming of sides complete all as specified and directed.

Excavation in trenches exceeding 1.5 mtr wide and not exceeding 3.0 mtr deep for foundation etc for shaft, wells, cesspits, man holes, septic tanks etc, not exceeding 10 sqm on plan in soft/loose soil and getting out of soil including trimming of sides complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone agg to drain pipe including packing under and haunching against the side of of pipe 150 mm dia (internal) after these are laid in trenches complete all as specified and directed

M&L for 150 mm dia (internal) SGSW pipes of grade ‘A’ laid in trenches and jointed complete all as specified and directed

M & L for 50 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in flooring, finished even and smooth without using extra cement complete all as specified and directed.

M & L for precast concrete slab in cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates set and jointed in CM 1:4 complete all as specified and directed.

M & L Cement Concrete type B1 , 1:2:4 mix (20mm graded crushed stone aggregate ) as in bedding , benching of manholes , copings, roof kerbs and surface channel etc. complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

M & L for 75mm thick PCC 1:4:8 type B-2 cement concrete in foundations, filling and mass concrete complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frames shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom raid on either side and as gap insert for top rail on either side andas gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rials with suitable PVC sheet beading, and joined together with solvent cewment, suppling and fixing in the frame at site as per specification and drawing as directed by Engineer-inCharge.

S&F extruded Aluminium anodised 100 mm long Butt hinges type B-21 with galvanised mild steel hinge pin complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.

S&F Aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed.

Taking down shutters any description exc 1 Sqm but n.exc 2 sqm each, and refixing in the same opening complete all as specified and directed.

S&F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.

M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed of block of hold fast etc complete all as specified and directed.

S&F 2nd class HW factory made Plain, framed, pannelled shutters 35 mm thick (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat painting complete all as specified and directed.

S&F Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with out glazing bars dovetailed or welded including one shop coat painting complete all as specified and directed.

S&F fixed type Steel windows/ventilators for industrial buildings, with glazing complete all as specified and directed.

Hacking out old broken glass from metal frame of any thikness incl punching or drilling out old glazing pins/ springs clips and S/F for 3 mm thik pin headed sheet glass and glazing with oil putty in square nexc 0.5 sqm in each panes complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc complete all as specified and directed.

M & L sheet glass ordinary quality 3 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel, metal or wooden window frames complete all as specified and directed.

All as per item No. 46 but pin head type, figured glass complete all as specified and directed.

S&F 250 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed.

S&F 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed.

S&F 150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as specified and as directed.

S&F 150mm length floor door stopper of aluminium alloy body and tongue,anodised with hard drawan steel spring fixed in floor complete all as specified and directed.

S&F framed brackets of angles cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary, each backets confirming to Fe - 290, Gde - E - 165 as door frame, hand wash basin, cooler stand etc complete all as specified and directed.

Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint over one coat of Red Oxide (for steel surfaces) complete all as specified and directed.

M&L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) M&L rendering 10mm thick in cement plaster(1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces. (Note : WPC shall be measured and paid separately). (b) Applying first coat of chemical pidifin 2K(Dr Fixit) o cleared RCC surfaces @ 0.86 Kg/sqm (minimum) as recommed by manufacturers. (c) Provide a layer of glass fiber mesh sixe 2.25mm x 2.25mm (45 GSM) over first coat of chemical pidifin 2K as per manufacturer recommendation. (d) Applying second coat of chemical pidifin 2K (dr Fixit) @ 0.86 Kg/Sqm (minimum) over layer of glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturer's.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc complete all as specified and directed.

M&L for 25mm PCC (1:2:4) type B-1, 12.5mm thick as in floors finished even and fair for receiving kota stone in finished floor complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, over and including 15mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, over and including 10mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match as in skirting complete all as specified and directed.

S&F glazed ceramic coloured tiles in vetical surfaces size 300x450x7mm thick, over & including 10mm thick screed in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified and directed.

S & F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed

S & F in repairs 15 mm dia bore fancy type chromium plated concealed stop valves of cast copper alloy with long shank & cup etc. complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

Stainless steel fancy type peg set of four and fixed in position with steel screws complete all as specified and directed.

S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed.

S & F in repair 125 mm dia CP Grating, fixed on floor/nahani trap complete all as specified and directed.

S&F in repair 15 mm dia bore fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down GI tubing 25 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, complete all as specified and directed.

S&F GI tubing 25m mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, complete all as specified and directed.

Ditto- but refixing 15 mm dia ,old steel tubuing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed.

Ditto- but refixing 20 mm dia ,old steel tubuing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed.

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed incl Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed.

S&F in repairs 100 mm CI connection socket to fit out let of WC complete all as specified and directed.

S&F in repairs CI cowls 75 mm complete all as specified and directed

S & F MS grating 150mm dia circular/quare size fixed over roof complete all as specified and directed.

S&F in repairs 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 25mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed.

S & F PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed.

S&F in repairs wash hand basin of size 450 x 300 mm vitreous China white flat back/corner type including brackets, waste coupling & PVC waste pipe of 32 mm dia complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

S&F 100mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls/floor & fixing with clamps complete all as specified and directed.

S&F 75mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but laid in floor/wall complete all as specified and directed.

S&F 100 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door, complete all as specified and directed.

S&F 75 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door, complete all as specified and directed.

M&L for in repair 100mm dia of CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

M&L for in repair 75mm dia of CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

M & L for Salt-glazed stoneware gully traps of size 150 x 150 mm, square or round mouthed, type 'P' complete all as specified and directed.

M&L for extra Joints over cast iron pipe of 100 mm bore pipes, bend joints. etc is provided Epoxy joints in lieu of cement joint, complete all as specified and directed.

M&L for extra Joints over cast iron pipe of 75 mm bore pipes, bend joints. etc is provided Epoxy joints in lieu of cement joint, complete all as specified and directed.

M&L for applying one coats of Dr Fixit pidecrete URP in chajja, staircase. etc by using 2 Sqm per 1 Kg URP + cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush. Etc complete all as specified and directed.

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar in 1:3 on ceiling complete all as specified and directed.

Demolition of brick work of any type built in cement mortor in foul condition etc complete all as specified and directed.

M&L PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick as in plinth protection finishing fair, even and smooth without using extra cement complete all as specified and directed.

Demolition of RCC of any descrition such as Kitchen chimney, chajja, shelves, OHT Tanks. etc and in any position not other wise specially provided for complete all as specified and directed. (reinforcement cut as required to facilitate demolition)

M & L for providing precast cement concrete type B-1 1:2:4 (20mm graged aggregate) as in manholes covers, kitchen sink slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc., and setting in mortar complete with joints to match complete all as specified and directed.

S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed incl Dismantling water tanks of exc 250 and n.exc 500 ltrs capacity water storage tanks complete all as specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed incl Dismantling water tanks of exc 250 and n.exc 500 ltrs capacity water storage tanks complete all as specified and directed.

S&F 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed.

Refixing only 500 /1000 Ltrs capacity rotational moulded polyethylen water storage tank after cleaning and removing all scale and dirt etc from tanks and from mouths of cirulating pipes etc incl dismantling of tank complete all as specified and directed.

M&L applying two coat of white wash on old plastered surfaces of wall incl preparation etc complete all as specified and directed.

M&L applying three coat of white wash on New plastered surfaces of wall incl preparation etc complete all as specified and directed.

M&L for applying three coat of white wash on old plastered surface of ceiling incl prepetc complete all as specified and directed.

M&L for applying three coat of white wash on new plastered surface of ceiling incl prepetc complete all as specified and directed.

M&L for complete removal of existing surfaces of walls and applying two coat of Cement Based paint over a coat of primer incl prep of surface etc complete all as specified and directed.

M&L applying Two coat of Cement Based paint on New plastered surfaces of wall over a coat of primer incl preparation etc complete all as specified and directed.

S&F in repair Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern , flush pipe and waste pipe)complete including providing and fixing plug, bedding urinal against wall in cement mortar 1;2, securing urinal to plug with and including 60mm long brass screws, pointimg arround urinal back in cement,fixing automatic flushing cisturn with brackets,flush pipe, gratingand union for discharge pipe.(Excluding of fixing supply pipe to flushing cistern,trap and waste pipe) complete all as specified and directed.

Rendering 15 mm thick (Average thickness) rendering on roof surface including flashings and junction of parapets etc., finished even and fair in cement mortar (1:3), using water proofing compound as per recommended ratio, after brushing cement slurry @ 1.20 kg/Sq. m, complete all as specified and directed. NOTE: Supply only WPC will be measured and paid for separately under respective item.

Factory made 250 mm x 250 mm size and 20-25 mm thick, PCC tiles with grey cement & no pigment, bedded over 15 mm thick cement mortar (1:4), and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on lime concretre complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layer on roof and disposal off retrieved material upto a distance of 100m where complete all as specified and directed.

Demolition of mud in roof any thickness including plastering and leeping and disposal of rubbish upto a distance n.exc 100m where complete all as specified and directed.

M&L for wire brushing and cleaning top sufaces roof slabs etc including washing the roof surface with water and making the surfaces free from mud etc complete all as specified and directed.

Priming surfaces and applying APP based polymeric membrane mimimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application as treatment(for moderate conditions) including after applying bituminous primer @ 0.5 Lt/Sqm over RCC/plastered roof surface and flashing etc complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 etc complete all as specified and directed.

M&L cement concrete type B1 ,1:2:4 mix (20 mm stone aggregate) as in bedding ,benching,of manhole ,coping etc complete all as specified and directed.

Making benching with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concavbe shape complete all as specified and directed.

INTERNAL ELECTRIFICATION

Taking down carefully to existing serviceable copper point wiring (light,fan, socket or power) complete including fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removing materials to E/M store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

M&L for wiring with 1.5 sqmm size starnded FRLSH copper conductor cable single core multi starnded copper in and including PVC conduit medium grade and MS termunal boxes suitable for housing modular switches , sockets and regulators with all fittings and fixing materials including modular inner plate and cover plates of suitable modules and multistarnded FRLSH copper earth continuty conductor of size 1.5 sqmm and connecting to common earth dolly all as specified and directed for the following complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed. (Note : - Switches, sockets etc shall be measured and paid for separately under appropriate items of Sch 'A' ).

One light point/fan point controlled by one switch & fan regulator for C/fan etc. with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed.

One Socket outlet three pin, 6 Amp, on the same board, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, complete all as specified and directed.

One socket outlet three pin, 6 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed.

One light point controlled by two two way switch with 1.5 Sq. mm (nominal area) Cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed.

One socket outlet three pin, 5/15 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed.

Note for serial item No 135 to 140: 1. Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. 2. GI boxes shall be fixed flush in position with cement mortar (1:4) complete all as directed.

S&F Switch modular type single pole, one way, 6 Amp, complete all as specified and directed.

S&F Switch modular type single pole one way, 16 Amp, complete all as specified and directed.

S&F Switch modular type single pole two way, 16 Amp, complete all as specified and directed.

S&F Socket outlet modular type, multipurpose, 3 pin, single pole one way, 6 Amp, two module, complete all as specified.

S&F Socket outlet modular type multipurpose 2/3 pin single pole one way 6/16 Amp, two module, complete all as specified.

S&F Fan regulator, modular type, 5 step, high speed, two module complete all as specified.

S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 6 sqmm along with earth wire 6.0 sqmm copper conductor single core wire connected by common earth in existing surface/recessed PVC/steel conduit and including 25mm dia concealed PVC conduit, medium grade ISI marked complete all as specified and directed. (Note:- Three lengths of 6 Sqmm cable will be measured as one length). (Note :- two lengths of 6.0 sqmm cable and one length of 6.0 sqmm earth cable will be measured as one running length)

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 4 sqmm along with earth wire 4.0 sqmm copper conductor single core wire connected by common earth in existing surface/recessed PVC/steel conduit and including 20mm dia concealed PVC conduit, medium grade ISI marked complete all as specified and directed. (Note:- Three lengths of 4 Sqmm cable will be measured as one length). (Note :- two lengths of 4.0 sqmm cable and one length of 4.0 sqmm earth cable will be measured as one running length)

S & F RCBO for EARTH LEAKAGE, OVERLOAD & SHORT - CIRCUIT PROTECTION 415V 40/63A AC type 10KA four pole 30MA ISI marked complete all as specified and directed.

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting 12way, SPN 230 Volt, with 200 Amp rated bus bar with blanking plates suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed.

Supply and fixing in replacement sheet metal encloser double door 8 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet factory made including blanking plate for unused module complete all as specified and directed.

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting TPN 4 way, 415 Volt, with 200 Amp rated bus bar with blanking plates suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed.

S&F MCB 6-32 Amp 240V SP 10 KA ‘B’ series complete all as specified and directed.

S&F MCB 20-32 Amp 240V SPN 10 KA ‘B’ series complete all as specified and directed.

S & F angle lamp holder polycarbonate type with back plate complete all as specified and directed.

S & F LED 7W lamp base B-22 complete all as specified and directed.

S & F LED 5W lamp base B-22 complete all as specified and directed.

Taking down fan, ceiling cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

S&F wall mounted extruded Aluminium/polycarbonate LED batten fixture T8(G13 holder) 1.2 m, including one LED retrofit tube 20(±10%) watt, 1.2 m T8 6500K,efficacy not less than 90 lumen/ watt, extruded Aluminium / polycarbonate, PC diffusor and inbuilt driver complete complete including making connection complete all as specified and directed.

S&F in repair wall mounted LED batten fitting 10 (±10%) watt, 6500K, 0.6m, efficacy not less than 90 lumen/watt , extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete includign making connection complete all as specified and directed.

S & F wall mounted extruded aluminium/polycarbonate integrated LED batten fixturewith tube 1.2m, 25watt, 1.2m T5, 6500K, efficacy not less than 90 lumen/watt, extruded aluminium/polycarbonate, PC diffusor and inbuilt driver complete all as specified and directed.

S & F in replacement single pole and neutral enclosure 240V with a two pin and earth plug and socket complete with one single pole MCB 20Amp complete all as specified and directed.

Labour only for dismentling and taking down of existing serviceable MCB DB 8way along with MCB SPN/DP/SP etc with due care and safely complete and refixing the same (after carring out repair work/rewiring in Accn), making connection serviceable complete all as specified and directed.

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable.

S&F LED street light fitting 25 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 & IK 08 protection including fixing with suitable bolt and nuts complete with making connection complete all as specified and directed.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/s Manav Builders

M/S KARTIK BUILDERS

LM CONSTRUCTIONS

SHARDA ENTERPRIES

NAV NIRMAN BUILDER