GE/CHM-37/2022-2023 CERTAIN REPAIR TO SANITARY/ PLUMBING WORK, JOINERY, ROOF TREATMENT, FLOORING, BRICK WORK, PLASTERING AND CONNECTED WORK IN SECTOR E MARRIED ACCN UNDER AGE B/R III AT CHANDIMADIR

Amount

Taking down chowkats or frame n. exc. 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frame exc. 1.5 sqm and n exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1Sqm but not exceeding 2sqm each including stacking at location as directed by Engineer-in-Charge for refixing in same opening(s) after rescuring or easing, adusting, welding, etc., complete all as specified and directed.

Factory made pressed steel frames having profile 125mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc. complete ,all as specified and directed.

Factory made pressed steel frames having profile 105mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc. complete, all as specified & directed.

Solid PVC frame having profile 105mm x 60mm , single rebate, made out of solid PVC foam with homogenous fine cellular structure having density not less than750Kg/ cum, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws , complete all as specified and directed. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.

Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.

Factory made solid PVC board 20-25 mm thick as in cup board shelf/ door, sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free, complete all as specified and directed.

Factory made solid PVC board 18-19 mm thick as in kitchen cabinet/ cupboard panell,sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free complet,e all as specified and directed.

35 mm thick, factory made, second class hard wood, plain framed hammer marked, panelled shutter (two panel)with lock rail and panel of 9 mm BWP commercial ply both face including 1.00 mm thick sunmica (lamination) on both sides of p-anel and 20 mm x 20 mm x 10 mm wooden beading all round the panel. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed.

35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to received gauge/ glass etc, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc complete all as specified and directed.

35 mm thick second class hard wood half panneled & Half glazed and skelton shutters open rebated and prepared to receive gauge/ glass etc, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass complete all as specified and directed.

Factory made steel window box type with side hung shutters including box type hinges and one shop coat of red oxide primer, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete with glazing bars, dovetailed or welded fixed with and including MS flat of suitable size for fixing grills and guards bars etc as in repair complete all as specified.

Factory made steel window box type with side hung shutters including box type hinges and one shop coat of red oxide primer, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete without glazing bars, dovetailed or welded fixed as in repair complete all as specified.

Factory made box type steel ventilators, openable with side hung shutters with box type hinges including one shop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded fixed in repair complete all as specified and directed.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire & avg width of aperture 1.18 mm in fixed with tinned tacks complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden, metel frames including punching or drilling out glazing pins/spring clips complete all as specified and directed.

4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

35mm thick flush shutters, solid core costruction, with block board core and plywood face panels, commercial type on both sides as in cupboards, etc. complete all as specified and directed.

Factory made solid panel PVC shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside, all as specified and as per drawings.

Framed work such as grill guard bars etc welded to steel frame MS round/square bar conforming to Fe 290 Gde-E 165 complete all as specified and directed.

75 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed.

100 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed.

100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed for PVC door, type C-21 complete all as specified and directed.

Continuous (Piano) hinges of size 30mm (width of flap when open) , mild steel , complete all as specified and directed.

125mm hasp and staple,aluminium anodised, wire type, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

200 mm size aluminium , barrel tower bolt of extruded section and fixed complete all as specified and directed.

150 mm size aluminium, barrel tower bolt of extruded section and fixed for PVC door complete all as specified and directed.

150 mm aluminium handles cast type complete all as specified and directed.

Welding of MS hinges, door spring,MS door stopper and similar items by providing arc welding in sufficient length, grinding/cleaning of excess welding spots etc, complete as specified and directed.

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed.

Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide, zinc chrome complete all as specified and directed.

All as per item No 35 here-in-before but except primer

300mm MS ordinary rat tail rod pattern spring incl roller plate complete all as specified and directed.

Magic eye of size suitable for wooden door complete, all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified and directed.

Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete, all as specified and directed.

Dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in CM 1:4 complete all as specified and directed.

Rendering 5mm thick in CM 1:3 on fair faces of concrete/brick surfaces as in ceiling, chajja, etc. finished fair and smooth complete all as specified and directed.

Rendering 15mm thick in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed.

Three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed

Preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

One coat of white wash on ceiling surfaces including preparation of old surfaces complete all as specified and directed.

Complete removal of existing treatment by using of wire brush /mechanical grinder including washing rubbing down and stopping of distempered or painted surface and applying wall care putty of 2 to 3 mm thick over and including a coat of wall primer, smoothening the surfaces with sand papers etc.and applying two coats of oil bound distemper using hand roller, complete all as specified and directed.

Complete removal of existing treatment by using wire brush /mechanical grinder including washing rubbing down and stopping of distempered or painted surfaces and applying two coats of cement base paint incl necessary curing on wall surface of any description complete all as specified and directed.

One coat of white wash on wall surfaces including preparation of old surfaces, complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed.

50mm thick plain cement concrete type C-1 1:3:6 (Using 20mm graded crushed stone aggregates) as in plinth protection finished fair and even without using extra cement complete all as specified and directed.

Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.

Demolition of un-reinforced cement concrete exc 15cm thick on any description and in any position (in sunken portion) not other wise specially provided for ,complete all as specified and directed.

Plain cement concrete 1:7:12 type F-2 using 40mm graded brick coarse aggregate as in sunken floor filling and mass concrete complete all as specified & directed.

Water proofing treatment to sunken portion and adjoining walls of kitchen, WC, Bath & Toilet, etc complete all as specified as under:- (a) 15 mm plaster in cement mortar (1:3) mixed with water proofing compound as per manufacturer’s instructions after roughning and cleaning the surface . (b) Applying cement slurry to the surface @ 0.488 kg /Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sq. m and allowing the surface to air cure for 4 hours. (c) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and allowing the surface to air cure for 4 hours. (d) Curing the sunken portion with water minimum for 48 hours by ponding. (e)Applying 3mm thick APP membranne with bitumen by torch application to the treated sunken surface over a coat of primer as per manufacturers instructions. (f) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:6, complete all as specified and directed.

Glazed ceramic coloured tiles of size 300mmx450mmx 7mm thick as in dado, set and jointed in neat cement slurry and grouted in white cement complete as on vertical surfaces over and including 10 mm thick bedding layer in CM 1:4 complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick screed or bedding layer in CM 1:6, complete all as specified and directed.

Baroda green marble 14 to 16mm thick, machine cut, laid over and including 10mm thick screed bed in cement mortar (1:4), bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting and machine polishing (table rubbed and polished), as in kitchen platform, step, jambs, pillars and like, complete all as specified and directed.

Machine cut kota stone slab on vertical/horizontal surface like floors, skirtings etc, 16-18mm thick , best quality, width and length as ordered over and including 15mm thick screed bed in cement mortar( 1:4), bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting and machine polishing, complete all as specified and directed.

Machine cut kota stone slab (One Piece) on PCC stair step, riser, skirting of floors and similar situations , 16-18mm thick, best quality, width and length as ordered over and including 15mm thick average thickness cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting and machine polishing, complete all as specified and directed.

Making holes into or through concrete slabs/ stone slabs 150 mm long for 25mm dia pipe as in cooking plateform, incl making good the surface complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors, beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed.

Reinforced cement concrete( 1:1.5:3), type A 0, using 12.5mm graded crushed stone aggregate as in shelves, cover slabs of manhole, chajja, lintel or gully trap etc complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm complete all as specified and directed.

Form work to chullah hoods, chajjas and similar items including edges / sides and soffits of lintels etc rough finished surface of concrete flat complete all as specified and directed.

Cast iron nahani traps 100mm dia with grating including jointing to waste pipe with run led jointed and setting/fixed in cement concrete type B-1 1:2:4 fixed as in repair complete all as specified and directed.

Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with and including waste coupling, angle brackets, PVC connection 15mm size, 450mm long, PVC waste pipe, fixed as in repair complete all as specified and directed.

Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement fixed in repair complete all as specified and directed.

Vitreous China Wash down water closet (pedestal pattern) , white, with and including PVC seat cover, complete all as specified and directed.

100mm dia bore traps 'P' or 'S' complete all as specified and directed.

White PVC valveless flushing cistern (Duel type) of capacity 10 litres, syphonic action , low level with inlet, ball valve, float, handle, PVC connection & 32mm dia CP flush pipe (long type for squatting pan) incl brackets, as in repairs, complete all as specified and directed.

PVC connection 15mm size with PTMT nuts of length 450mm long as in repairs complete all as specified and directed.

Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with CP bracket guard and railing 60cm long, fixed as in repairs, complete all as specified and directed.

Grating doom 100mm dia of PTMT, fixed to floor trap with cement mortar 1:3, fixed as in repairs, complete all as specified and directed.

Plate rack of stainless steel sheet 1.0mm thick of size 600mmx 600mm with steel shelves and hanging arrangements for utensil, fixed as in repairs, complete all as specified and directed.

Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm x 203mm, with bowl of size 405mm x 354mm x 203mm incl fixing cantilever brackets, fixed as in repairs, complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore, complete all as specified and directed.

Taking up or down steel tubing and connections 20mm bore ,complete all as specified and directed.

15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors ,complete all as specified and directed.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning ,complete all as specified and directed.

20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning, complete all as specified and directed.

16 mm (outer dia) CPVC pipes, SDR 11 and Plain CPVC SDR 11 fittings, fixed on walls/ceiling or laying in floors, complete all as specified.

20 mm (outer dia) CPVC pipes, SDR 11 and Plain CPVC SDR 11 fittings, fixed on walls/ceiling or laying in floors, complete all as specified.

Brass Elbow 16 mm for CPVC Pipe, all as specified.

Brass Elbow 20 mm for CPVC Pipe, all as specified.

Brass Elbow (3/4 X ½) for CPVC Pipe, all as specified.

Brass Tee 16 mm dia UPVC pipe,, all as specified.

Brass Tee 20 mm dia UPVC pipe, all as specified.

Male Brass Threaded Adaptor 16 mm dia (MTA/ MBTA) for CPVC pipe, all as specified.

Male Brass Threaded Adaptor 20 mm dia (MTA/ MBTA) for CPVC pipe, all as specified.

Female Brass Threaded 16 mm dia Adaptor (FTA/ FBTA) for CPVC Pipe, all as specified.

Female Brass threaded 20 mm dia adaptor (FTA/ FBTA) for CPVC Pipe, all as specified.

Tank adapter16 mm dia for CPVC Pipe, all as specified.

Tank adapter20 mm dia for CPVC Pipe, all as specified.

Union 16 mm dia for CPVC Pipe, all as specified.

Union 20 mm dia for CPVC Pipe, all as specified.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed.

sink mixer one hole with swivel casted spout ( wall mounted model), chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs, complete all as specified & directed

Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, fixed as in repairs complete all as specified and directed.

Bib taps brass, fancy type, Short body with wall flange, standard chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs compl complete all as specified and directed.

Bib taps brass, fancy type, long body with wall flange, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed

Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repairs, complete all as specified and directed

20mm dia anodised aluminium alloy curtain rod including fixing fancy types brackets, stops, rollers etc., as in repairs complete all as specified and directed.

Taking down rain water pipes (any types) including all fittings any size and pattern complete all as specified and directed.

PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed.

110 mm bore PVC (SWR) bends of any radius complete, all as specified and directed.

PVC (SWR) waste pipe, 75mm bore, single socketed in any length with cement/ rubber ring joints, laid in trenches or in floor or fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed in repairs, complete all as specified and directed.

75 mm bore PVC (SWR) bends of any radius complete, all as specified and directed.

Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) and removal of any existing treatment , complete all as specified & directed.

Raking out joints/ pointing in cement mortar to brick tiles, laid flat on roofs to receive cement concrete, complete all as specified and directed.

Rendering 20mm thick (average thickness) for levelling of RCC roof slab, finished even and fair in cement mortar (1:4), complete all as specified and directed.

Plain cement concrete 1:3:6 type C-1 as in roof padding, terraces,sunkens and in other locations as per site requirement , complete all as specified and directed.

Supply only water proofing compound, ISI marked complete all as specified and directed.

APP based polymeric membrane 3mm thick, minimum weight 3 kg/Sqm , reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by torch application on and including bituminous primer @ 0.40 ltrs per square metre ,complete all as specified and directed.

40mm thick brick tiles over and including 20mm thick Cement mortar 1:4 joints, grouted & pointed flush as the work proceeds mixed with crude oil 5% by wt of cement complete all as specified and directed.

All as per item No 127 here-in-before but except tiles.

Plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in roof kerbs of mud stops, rounded or chamfered on edges usingincluding necessary form work, complete all as specified and directed.

500 Litres capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) double layered hoisted and fixed in position including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repairs, complete all as specified and directed.

1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including PTMT tank nipple, float valve of 20 mm bore etc, fixed as in repairs complete all as specified and directed.

Float valve/ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe (minimum weight 210 gms), fixed as in repairs, complete all as specified and directed.

Supplying, fabricating and fixing of monkey menace made up of 0.8 mm thick galvanised mild steel sheet of size 1000 x 100 mm , making of 10 Nos sharp spikes by cutting and bending (saw pattern) as directed including fixing to PVC overhead tank with nut and bolts,complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, all as directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Rolled mild steel as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming toFe 410 -W (GdeE- 250) quality A, all as specified .

Cutting holes in brick walls built in cement mortar (exc. half brick but not exc. one brick ) and making good the surfaces by cement mortar (1:3) or PCC (1:2:4) type B-1, complete all as specified and directed.

Concrete interlocking pre polished paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over and including 25mm thick sand cushioning, complete all as specified and directed

m/s AR Construction co

Satyadev Builders

KUNDRA CONSTRUCTIONS

aggarwal contractors and engineers