Special repairs and painting of Old-E type in NML Housing Complex Agrico for the year 2019-2020 and 2020-21

Amount

Dismantling doors, windows shutters including chowkhats,architrave, holdfasts,etc. complete and stacking disposal of material as per direction of EIC. Of area 3sq. Metres and below.

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres as per direction of EIC Nominal Concrete Mix 1 :3:6 or richer mix.

Demolishing reinforced cemenrt concrete manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metre lead as per direction of EIC.

Demolishing Brick work in cement mortar manually/ by mechanical means including stackng of serviceable material and disposal of unserviceable material with in 50 metre lead as per direction of EIC. In Cement Mortar.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground with in 50 metre lead.

Dismantling GI pipes (External work) including excavation and refilling trenches after taking out the pipes , manually /by mechanical means including stacking of pipes within 50 metre lead as per direction of Engineer In Charge. 15 mm to upto 40mm nominal bore

Dismantling GI pipes (External work) including excavation and refilling trenches after taking out the pipes , manually /by mechanical means including stacking of pipes within 50 metre lead as per direction of Engineer In Charge. Above 40mm nominal bore

Demolishing tiles work in floors and roofs laid in cement mortar including stacking material within 50 metre lead.thickness of tiles 10 mm to 25 mm

Dismantling steel work in single section including dismembering and stacking within 50 metreleadin:Channels,angles,tees and flats.

Dismantling CI or asbestos rain water pip with fitting and clamps including stacking the material within 50 metre lead:

75 to 80 mm dia pipe

100 mm dia pipe

Supply Chemical emulsion in sealed containsers including delivery as specified.Chlorpyriphos/Lindane emiulsifiable cocentrate of 20 % .

Supplying and filling plinth with sand under floor including watering, ramming, consolidating and dressing,complete.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains(not exceding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottom,lift up to1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within alead of 50 m.All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, side of foundations etc. in layer not exceeding 20 ems in depth: consolidating each deposited layer by ramming and watering, lead upto 50m and lift uoto 1.5m.

Providing and laying 60 mm thick factory made cement concrete paver block of approved shape and colour of M-30 grade made of C& D waste by block making machine with vibratory compaction laid in required pattern and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc.all complete as per the direction of Engineer -in-charge.

P/F ceramic glazed floor tiles of size 300x300 (thickness to be specified by manufacturer) 1st quality conforming to IS : 15622 of approved make colours, such as White , Ivory , Grey,Fume Red Brown, Laid on 20mm thick cement mortar 1:4 (1cement: 4 Coarse sand) and jointing with gray cement slurry @ 3.3 kg per sqm incl. pointing the joints with white cement mixed with pigment of matching pigments etc., complete.

Grading roof for water proofing treatment with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) with waterproofing material.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work uoto plinth level. 1:2:4 (1cement:2coarse sand: 4graded stone aggregate 20mm nominal size.)

Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement- all work up to plingth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

RCC work in walls, beam suspended floors, roofs having slop up to 15 degree landing , balconies, shelves, chajja, lintels, bands, plain window sill ,stair case and spiral stair cases above plingth level up to floor five level excluding cost of centering,shuttering,finishing and reinforcement. 1:1.5:3 (1cement:1.5coarse sand: 3graded stone aggregate 20mm nominal size.)

Steel reinforcement for RCC work including straightening, cutting bending, placing in position and binding all complete above plinth level.Thermo- Mechanically Treated Bars Fe -500 D or more

Centring and shuttering including strutting,propping,etc. and removal of form for: Foundation,footings,bases of columns,etc.

Centring and shuttering including strutting,propping,etc. and removal of form for: Suspended floor ,roof ,landing , shelves, beams, columns balconies,etc.

Centring and shuttering including strutting,propping,etc. and removal of form for: Weather Shade, chajjas,corbels,etc. including edges

Brick work with common brunt clay F.P.S (Non Modular ) bricks of class designation 7.5 in foundation and plingth: in Cement mortar 1:6 (1cement : 6 coarse sand)

Brick work with common brunt clays F.P.S (non modular) brick of class designation7.5 in super structure above plingth level upto floor V level in all shapes and sizein cement mortar 1:6 ( 1Cement : 6 Coarse Sand).

Half brick masonary with common burnt cly F.P.S (non Modular ) brick of class designation75 in super structure above plingth to floor V level. Cement mortar 1:4(1 cemt : 4 coarse sand)

12mm cement plaster of mix. 1:4 (1cement : 4 coarse sand)

15mm cement plaster on rough side. 1:4 (1cement : 4 coarse sand)

6 mm cement plaster for ceiling of mix 1:3. (1cement : 3 fine sand)

Neat cement punning.

Structural steelwork single section, fixed with or without connecting plate , including cutting ,hoisting , fixing in position and applying a priming coat of approved steel primer all complete.

Structural steelwork riveted,bolted or welded in builtup section, trusses and framework including cutting hoisting and fixing in position and applying priming coat of approved steel primer all complete.

P/F MS grill of required pattern in frames of windows etc. with M.S flats ,square or round bars etc.including priming coat with approved steel primer all complete.Fixed to openning /wooden frame with rawl plugs screws etc.

Providing & fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S gusset plates at the junctions and corners , all necessary fitting complete including applying a priming coat of approved steel primer.Using M.S angle 40x 40x6 mm for diagonal braces.

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing white vitreous china water closet approved make. Orissa pattern WC pan 580 x 440mm

Applying priming coat with ready mix pink or grey primer of approved brand and manufecture on wood ( hard and soft wood) on wood work.

Finishing walls with waterproofing cement paint of required shade :old work (one or more coat applied @ 2.20kg/10sqm.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth inculding necessary repairs to scratches etc. complete

White washing with lime to give an even shade (old work) two or more coats.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Applying priming coats with primer of approved brand and manufecture ,having low VOC(Volatile Organic Compound) Content.With water thinnable cement primer on wall surface having VOC content than 50 grams /litre

Finishing walls with Acrylic Smooth exterior paint of required shade . Old Work (Two or more coat applied @ 1.67 ltr/10sqm) on existing cement paint surface.

Painting (one or more coats) on rain water ,soil waste and vent pipe and fittings with anticorrosive bitumastic paint of approved brand and manufecture on old work:75 mm diametre pipes

Painting (one or more coats) on rain water ,soil waste and vent pipe and fittings with anticorrosive bitumastic paint of approved brand and manufecture on old work:100 mm diametre pipes

Lettering with black japan paint of approved brand and manufecture

Providing and fixing on wall face unplasticised Rigid PVC rain water conforming to IS-13592 Type A, including jointing with seal ring conforming to IS: 5382, 75 mm dia

75 mm dia pipe

110 mm dia pipe

Providing & laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement: 2 fine sand) including testing of joints,etc. complete.300 mm dia R.C.C pipe

Providing and fixing PVC moulded fittings/accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion .

Single pushfit Coupler -75 mm

Single pushfit Coupler -110 mm

Providing and fixing PVC moulded fittings/accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion . Bend 87.5 degreesize 110 mm bend.

Bend 87.5 Degree-75 mm

Bend 87.5 Degree-110 mm

Providing and fixing PVC moulded fittings/accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion .

Shoe (Plain) size 75 mm.

Shoe (Plain) size 110 mm .

Providing and fixing PVC moulded fittings / accessories for unplasticised Rigid PVC pipes rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion .

Single Tee withdoor -75x75x75 mm

Single Tee withdoor -110x110x110mm

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :75 mm dia pipe

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :110 mm dia pipe

Providing and laying four course water proofing treatments with bitumen felt over roofs consisting of first and third course of blown bitumen 85/25 or 90/15 conforming to IS :702 applied hot @1.45 kg per square metre of area for each course ,second course of roofing felt type 3 grade -I (hessian based shelf finished bitumen felt)and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre , including preparation of surface but excluding grading complete with : Bitumen felt ((hessian base) type 3 grade I conforming to IS : 1322

Renewing glass panes ,with putty and nails wherever necessary including racking out the old putty: Float Glass panes of nominal thickness 4 mm (weight not less then 10 kg /sqm)

Renewal Of Old Putty of glass panes(length)

Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Enginineer-in-charge, beeyound 50 m initial lead for all leads including all lifts involved.

Providingand laying cement concrete in retaining walls ,return walls , walls (any thickness) including attached pilasters , columns, piers abutments, pillars ,post strut, buttresses, string or lacing courses , sunken floor etc., up to floor five level , excluding the cost of centering ,shuttering and finishing: 1:2:4(1Cement: 2 Coarse Sand: 4 graded stone aggregate 20 mm nominal size)

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works,including applying priming coat of approved steel primer.G.I Pipe

Chipping of unsound /weak concrete material from slab , beam ,column etc. with manual chisel and /or by standard power driven percission type of aproved make including tapering of al edges, making square soulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brishes etc.and disposal of deberies for all lead and lifts all complete as per direction of Engineer-in- charge.

75 mm average thickness

50 mm average thickness

25 mm average thickness

Cleaning of reinforcement from rust from the reinforceing bars to give it a total rust free steel surface using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hour of its application with wire bush and thoroughly washing with water and allowing it to dry ,all complete as per direction of Engineer in Charge.

Bars up to 12 mm diametre

Bars up to above 12 mm diametre

Providing ,mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specification and direction of Engineer -In- Charge complete in all respect.SBR Polymer (@ 10% of Cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specific proportion of approved polymer

Add for plaster drip course /groove in plastered surface or moulding to R.C.C projections.

Providing and fixing double scaffolding system (cup lock type) on the exterior side , up to seven story height made with 40 mm dia M.S Tube 1.5 m centre , horizental & vertical tubes joining with cup & lck system with M.S tube , M.S tube challies , M.S Clamps and and M.S staicase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as per approved and removing it there after . The scaffolding system shall be stiffened with bracing ,runners , connection with the building etc wherever required for inspection of the workman etc. complete as per direction and approval of Engineer -in- charge .The elevation area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note :- This item to be used for maintenance work judicially necessary deduction for scaffolding in the existing items to be done.

Supply and Applying of white cement based putty up to five floor ,of appeoved brand as per direction of engineer in charge.

Providing and Fixing of M.S Peg stay for steel window with necessary fittings and nut bolts- 300 mm length.

Providing and Fixing of M.S handle for steel window with necessary fitings and nut bolts- size 125 mm length.

P/F chicken mesh on the masonary or RCC work as per the direction up to five floor . The chicken mesh should be fixed with nails/screws to the wall or RCC.

Supply and Applying of bitumen, grade 85/25 or 90/15 of approved brand as per istruction of Engineer-In- Charge.

Scaffolding with bamboo for specified jobs as per direction Engineer -In Charge .

Diluting and injecting chemical emulsion for post construction anti-termite treatement (Excluding the cost of chemical Emulsion):Along the external and internal wall below concrete or masonary apron/ floor using chemical emulsion @ one liter per hole apart 300 mm including drilling 12 mm dimeter and plugging with cement mortar 1:2 (1 cement : 2 sand) to the full depth of hole.With Chlorpyripos/ Lindance E.C. 20% with 1% concentration.

Cutting Chases in wall ,Column, beams for brick work, RCC lintels, Chajja and other related work etc.

Providing and Fixing 110 mm dia PVC P- Trap of approved quality.

Providing and fixing with welding of reinforcement for column,beam, lintel, balconies,shelves, stairs, water tank, mumty etc.,for repair of RCC structure and structuralsSteel with connecting plate, fixing in position and applying a priming coat up to five floor with all respect complete complete.

Repairing /restoring the existing damaged steel window,ventilator by fabrication/welding/fixing the required materials such as Z section, flat, angle fittings,holdfast (steel section to be paid separately) etc for upto five floor with all respect completet. including dismantling and re fixing with concrete ,as directed by engineer-in-charge.Note- Only welding related repairing work consider in this items.

M/S.A.B.CONSTRUCTION