SPL REPAIRS TO BUILDING NO P-157 SRG COMPLEX OF 510 ABW UNDER GE (NORTH) MEERUT CANTT

Amount

Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above level), not exc 15cm thickness, inlcuding removal of rubbish outside MoD land complete all as specified and directed.

Taking down cement plaster on brick walls & concrete surfaces & the like including raking out of joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land complete all as specified & directed.

M&L Rendering 15mm thick on brick or concrete surface of wall in cement mortar (1:4) finished even and smotth without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick on brick or concrete surface of wall in cement mortar (1:6) finished even and smotth without using extra cement complete all as specified and directed.

M&L Rendering 5mm thick on ceiling in cement mortar 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L stone slabs 50mm thick set in cement mortar 1:4 dressed true and square in one length not less than 60cm and not exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints exposed edges rounded or chamfered, set, jointed and pointed in cement mortar as in plinth protection complete all as specified and directed.

M&L Three coats of white wash including prepeartion of newly plastered surfaces of wall of any description complete all as specified.

M&L preparation of new plasterd surfaces of wall and applying two coats of acrylic distemper over a coat of primer & chalk whitening & smoothening of surfaces complete all as specfied and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specfied and directed.

M&L Preparation of old painted wooden surfaces over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specfied and directed.

M&L Preparation of old painted steel surface or iron surfaces over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L Preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash complete all as specified & directed.

M&L Preparation of old surfaces of ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash complete all as specified & directed.

M&L Preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc rubbing down and stopping of surfaces using sand paper and applying one coat of acrylic distemper complete all as specified & directed.

M&L Complete removal of existing treatment and prepeartion of old plastered surfaces by applying wall care putty averaging thickness 2mm and rubbing with sand paper for making smooth surface and applying two coat of exterior emulsion paint over one coat of primer through roller complete all as specified & directed.

Supply and fix 110mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall including taking down old unserviceable pipe complete all as specified & directed.

M&L for 10mm thick plaster on roofs in cement mortar 1:4 mixed with using water proofing compound (liquid) @ 200ml per 50Kg of bag of cement including finishing the surface even and smooth without using extra cement for laying water proffing treatment complete all as specified & directed. Note:- Water proofing compound (liquid) shall be measured and paid Separately

Supply only liquid water proofing compound complete all as specified & directed.

M&L for 50mm thick (average thickness) PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in padding on roof finished the surface even and fair without using extra cement complete all as specified & directed.

M&L for cleaning the roof surfaces including taking out vegetation, debris and previous treatment on roof completely incl removal of screed bed/ concrete bed/plaster/ mud phuska or any other treatment carried out previously over roof surface and making the mother slab (Roof slab) completely visible prior to carrying out any other treatment complete all as specified & directed.

M&L for repairing the cleaned surfaces through repair mortar and applying priming coat of epoxy primer with resin and hardner in 1:3 ratio with water dilution as per manufacturer instructions, applying 2 coats of solvent based polyurethane liquid applied membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 Kg/Sqm (each coat), 2nd coat should be applied once 1st coat becomes dry complete all as specified & directed. Make:- Asian Paints/Thermax. Note:- (i) The work under this item shall be carried out by the authorized applicator of manufacturer by using modern techniques. The stage after cleaning the surface shall be approved by Engr-in-Charge. The contractor should calculate the quantity of material required in the work for WPT and full quantity of material should be brought by the contractor at site and Engr-in-Charge shall ensure the availability of full material before commencement of work. The material should be kept in safe custody of department for proper use in the work. (ii) Record for quantity of material consumed shall be maintained by GE. Consumed quantity must tally the calculated quantity of material to ensure quantity of work. Other necessary documents including purchase vouchers of connected items for full consumed quantity be obtained from manufacturer. The stage after completion of roof treatment work be again passed by GE. Efforts be made to complete the work in one GO. (iii) The contractor shall also furnish warranty of quality, finished work and effectiveness of water proofing treatment under this item for a period of 10 years from the date of completion. (iv) Height of building is more than 6 meters and contractor is advised to visit the site before quoting the tender. The rate quoted by the tenderer is deemed to include the cost of all necessary arrangement required for working on such height.

Taking down copper/aluminium point wiring (light, fan, socket or power etc) complete with all accessories like switches, sockets, regulators, ceiling roses, light fittings etc for taking credit and making good disturbed surfaces, applying distemper/Emulsions matching to the existing colour/quality of walls/floors/ ceilings etc complete all as specified and directed.

M&L for surface point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi- stranded, Fire Retardant, conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable FRLS in and including stove enamelled steel concealed conduit of 20mm dia or higher, medium grade complete with and including all stove enamelled steel conduit accessories/fittings, brass screws, washers etc, sunken zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly including cutting holes in or through the walls, amking good to walls, ceiling etc including two coats of white/colour washing/distempering etc to the disturbed surfaces to match complete all as specified and directed for the followings :-

One light/fan/bell point wiring controlled by one, one way switch/bell push button complete all as specified and directed.

One let socket point 3 pin 5 Amps on independent board complete all as specified and directed.

One let socket point 3 pin 5 Amps on same board complete all as specified and directed.

M&L for surface point wiring with 2.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi- stranded, Fire Retardant, conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable FRLS in and including stove enamelled steel concealed conduit of 20mm dia or higher, medium grade complete with and including all stove enamelled steel conduit accessories/fittings, brass screws, washers etc, sunken zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly including cutting holes in or through the walls, amking good to walls, ceiling etc including two coats of white/colour washing/distempering etc to the disturbed surfaces to match for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed.

Supply and fix switch piano flush type, 5A, AC, 240V one way ISI Marked complete all as specified & directed.

Supply and fix switch piano flush type, 15A, AC, 240V one way ISI Marked complete all as specified & directed.

Supply and fix socket outlet flush type, 5A, 5pin, AC, 240V ISI Marked complete all as specified & directed.

Supply and fix socket outlet flush type, 15A, 6pin, AC, 240V ISI Marked complete all as specified & directed.

S&F Electronic Step Fan Regulator, 240V, AC, 240V, ISI Marked complete all as specified and directed.

S&F ceiling rose surface Bakelite 65x50mm, 3 terminals, AC, 240V ISI Marked complete all as specified and directed.

S&F in repair mettalic enclosure, SPN DB, 240V, AC, 8 way, double door with 200 Amps rated busbar ISI marked completed all as specified and directed.

S&F in repair MCB SP 6 to 32A, AC, 240V, 10KA, ISI Marked complete all as specified and directed.

M&L for single phase sub main wiring with 2 run 6Sqmm + 1run 6Sqmm earth in 25mm conduit (3x6Sqmm-one unit length), 1100 volts grade, standed, PVC insulated, unsheathed, copper conductor FR- FLEXIBLE WIRING CABLE. CONFORMING TO IS:694-1990 with and including two run of continous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non-mettalic FR PVC concealed conduit of 25mm dia, medium grade with all PVC conduit accessories/fittings, brass screws, washers etc and connected to common earth dolly including all cutting/chases etc in wall, making good to walls etc including two coats of white/ colur washing/ distempering etc to the disturbed surfaces to match the existing including taking down submain wiring complete all as specified and directed. Note:- One meter of conduit along with 3x6 Sqmm wire shall be measured as one unit length completed all as specified and directed.

All as per Srl item No 31 above but single phase sub main wiring with 2 run 4.00 Sqmm+1run 4.00 Sqmm earth in 25mm conduit complete all as per specified and directed.

Supply and fixing in repair isolator DP, 40A, AC, 240V, ISI marked complete all as specified & directed.

S&F suspended, linear LED tube light fitting surface/pendent mounting, diffused, decorative box type consta LED batten light (6000K), 4 feet, 240V, 20 watt, adjustable hanging arrangement atleast 1.5 meters hollow pipe including poly carbonate diffuser type 20 watt rectrofit tube rod complete all as specified and directed.

mohanlal gupta

vibha associates

Manglam Engineers and Construction Co

Arun Construction Co.

veer enterprises

Gupta Automobiles