ADDITION AND ALTERATION TO EXISTING STORE ROOMS (03) (P-73) WITH AIR CONDITIONING (1.5 TON X 2) WITH WOODEN PANELLING AT CERTAIN PLACES OF HOSPITAL AT INHS ASVINI

Amount

SCHEDULE 'A' PART I (B/R WORKS) Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land. Note: The place of disposal shall be find out by the contractor.

Demolition of RCC of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and separating, scraping and cleaning of reinforcement and removing debris outside MD land.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the primeses complete all as specifed and directed. Note: The place of disposal shall be find out by the contractor.

M&L for vitrified ceramic tiles of size 600 mm x 600 mm x 9 to 10 mm thick of approved colour in flooring set, jointed in cement slurry and pointed in cement slurry mixed with pigment to match with shade of tile laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete all as specified. Note - The work shall be executed in patches

M&L for vitrified ceramic tiles of size 600 mm x 300 mm x 9 to 10 mm thick of approved colour in skirting/dado set and jointed in neat cement paste mixed with pigment to match the shade of tile and pointed in neat cement slurry mixed with pigment to match the shade of tile laid over and including backing coat 10 mm thick in cement mortar (1:4) complete all as specified. Note - The work shall be executed in patches

M&L for non skid ceramic tiles of size 300 mm x 300 mm x 6 to 7 mm thick or 400 mm x 400 mm x 6 to 7 mm thick of approved colour in flooring set, jointed in cement slurry and pointed in cement slurry mixed with pigment to match with shade of tile laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete all as specified

M&L for glazed ceramic tiles of size 350 mm x 450 mm x 6 to 7 mm thick of approved colour in skirting/dado set and jointed in neat cement paste mixed with pigment to match the shade of tile and pointed in neat cement slurry mixed with pigment to match the shade of tile laid over and including backing coat 10 mm thick in cement mortar (1:4) complete all as specified.

M & L for 12mm thick toughened glass door , double shutter including providing SS pivots of floor door closer, SS corner supports as required, SS handle 600mm long fixed on both shutter including necessary SS accessories like clamps etc complete all as directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick or concrete surfaces and finished fair and even including applying 1mm thich wall care putty completed all as specified.

M&L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub base and finished fair and even complete all as specified.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surfaces and finished even & smooth without using extra cement completed all as specified.

M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.

Dismantling boarding/ cupboard of any description, fixed in any position with screws completed all as specified.

S&F Plain aluminium ceiling System consisting of 600mm x 600mm pre coated aluminium tiles of 0.7 mm thickness of white colour laid over and including GI powder coated grid system consisting of 15mm wide T - section flanges in white colour having rotary stitching on the Main Runner, 1200 mm & 600 mm Cross Tee with a web height of 32mm, perimeter wall angles of size 19mm x 19mm secured to walls at 450 mm C/c with cadmimum plated screws including necessary fitting and 4 mm GI suspenders fixed to slab using anchor fastener in ceiling of length as required on site complete as per manufacturers instructions including taking down carefully existing false ceiling with electrical fittings/ fire sencers after disconnecting complete. Note-(i) Make: Armstrong . (ii)The rate includes for necessary cutting in false ceiling for fixing electrical fittings, fire sencers etc and making electrical connections complete.

M&L for second class hard wood (Sal) in scantlings wrought, timber framed and fixed to wall with suitable size screws complete all as specified.

M & L for wall panelling made out of 15mm thick 1st class Hardwood (teakl) boarding, planed and smooth finished on one side and edges tongued and grooved , width of panels exc 10 cm and n.exc. 20 cm and fixed with coloured screws to timber frame work as per design as directed by Engineer- in- charge.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth to produce a smooth, dry, matt surface stopped with transparent liquid filler as specified in SSR part I and applying two coats of synthetic varnish of colour and texture as directed by Engineer- in- Charge.

SCHEDULE 'A' PART II (E/M WORKS) M & L for point wiring with 1.5 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLSH copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including suitable size PVC casing capping (ISI marked) with all accessories and terminated in and including concealed sheet steel terminale box with modular cover plate and frame of sutable size including 1.5 sqmm size PVC insulated, unsheathed, multistranded FRLSH copper conductor cable for continuous earth conductor (using green colour) and connecting to earth dolly for One light/ fan / bell point controlled by one switch 5 Amp, SP, one way 240 volts.

Ditto- all as per item No 20.00 above but one 3 pin 5 Amps switch socket outlet on independent board

M & L for point wiring with 4 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLSH copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including suitable size PVC casing capping (ISI marked) with all accessories and terminated in and including concealed sheet steel terminale box with modular cover plate and frame of sutable size including 4 sqmm size PVC insulated, unsheathed, multistranded FRLSH copper conductor cable for continuous earth conductor (using green colour) and connecting to earth dolly for 3 pin socket outlet 15 Amps .

S & F Ceiling rose , surface bakelite 65x50mm , two to three terminal. all as directed.

S & F switch modular one way, 6 Amp, 1 module (ISI marked) complete all as specified.

S & F switch modular one way, 16 Amp, 1 module (ISI marked) complete all as specified.

S & F modular Socket 2/3 pin, 6 Amps, 2 module complete all as specified.

S & F modular Socket combination 6/16 Amps,6 pin, 2 module complete all as specified.

S & F in repairs MCB DB SPN 8 Way, single door with 200 Amps copper bus bar for each phase, 240 Volts complete with din rail, Neutral and Earthing bar complete all as specified and as directed.

S & F in repairs MCB SPN, 240 Volts, 40 to 63 Amps, 10 KA, 'C' curve complete all as specified and as directed.

S & F in repairs MCB SP, 240 Volt, upto 32 Amp, 10 KA, 'C' curve complete all as specified and as directed.

Supply, fixing, stringing and drawing submain wiring with 2 run of single core 10 Sqmm PVC insulated and unsheathed, multi stranded HRFR copper conductor cable using colour code for phase red and neutral black with and including 6 Sqmm PVC insulated and unsheathed multistranded HRFR copper conductor cable in green colour connected to common earth point and connected to earth dolly drawn through and including 32 x 12mm PVC casing caping, heavy grade (ISI marked) with and including all accessories etc including taking out carefully old sub main wiring and making good disturbed surfaces as per existing compete all as specified and directed. NOTE:- (i) Two run of 10 sqmm copper conductor cable , one run of 6 sqmm earth continuity conductor and 32 x 12mm PVC casing caping and accessories shall be measured and paid as one length.

SCHEDULE 'A' PART III (AC WORKS) Supply, fixing, installation and testing 5 star and EER 3.2 inverter based air cooled split type air conditioner, electric driven, single phase with capacity 2.0 Ton ( Non CFC gas ) , 230 volts, 50 Hz with cordless remote control unit and in built air ioniser and plasma filter for better indoor air quality complete with all accessories including suitable size powder coated stand for both units, fixing arrangement as per manufacturers instructions, and testing for performance including making hole in wall to pass pipe, provn of PVC drain pipe 20mm bore heavy duty as per site requirement and making good disturbed surfaces as per existing complete all as directed by Engineer-in-Charge. Make : O General/ Mitsubisi / Diakin

S&F single pole & neutral enclosure with a two pin and earth plug and socket 5 pin 15 Amps complete working on 240 volts, 50Hz, AC supply including one SPN MCB 20 Amps. Make - L & T , Legrand

Supply, fixing, clamping and joining copper tubing for suction line and for RM liquid discharge line duty insulated as per manufacturers instructions including making holes in the walls all as specified and directed by the Engineer- in- charge

M & L for point wiring with 4 sqmm (nominal area) PVC insulated and unsheathed multistranded copper conductor HRFR cable (using colour code as per IS), 1100 volts grade drawn through and including suitable size surface PVC casing caping (ISI marked) with all accessories and terminated in and including surface PVC moduler box with suitable frame of white colour including 4 sqmm size PVC insulated, unsheathed, copper conductor multistranded HRFR cable for continuous earth conductor (using green colour) and connecting to earth dolly for one industrial metal clad power socket on independent board.

SAHI SAGAR ENTERPRISES

SHRI SAI ENTERPRISES

Unitech Enterprises

GANGAJAL

S S ENTERPRISES