Repairing of Store Shed No.11, Platform for Spared Transformers and Renovation of Security Picket at Khairi

Amount

“Repairing of Store Shed No.11, Platform for Spared Transformers and Renovation of Security Picket at Khairi”

Demolition of stone masonry below G.L. upto 1.5 Metres depth including stacking of serviceable materials and disposal of un-serviceable materials within 20 Metres lead

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres.(50% spade work & 50% pick work)

Stone soling properly hand-packed filling interstices without spalls and consolidating without power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100 mm spread thickness (finished work including materials and labour).

Providing from work of ordinary timber plankings so as to give a rough finish including centring, shuttering, strutting and propping etc. height of propping and centring below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu reinforced concrete and plain concrete work in:- Foundations, footings, bases of columns etc. and mass concrete.

Providing and laying cement concrete 1:4:8 with 15% plums and curing complete including the cost of formwork for plain/reinforced concrete in retaining walls, breast walls, the size of plum should be 150 to 300 mm as per drawing and HP, PWD technical specifications.

Providing and laying cement concrete 1:3:6 (1cement:3 sand:6 graded stone aggregate 40mm nominal size) excluding cost of centring and shuttering in: Foundations and plinth.

Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in: Foundation and plinth

Dismantling cement asbestos celotax/hard board in ceiling or partition wall including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead (Frame work such as joists, beams to be measured and paid for separately)

Dismantling wood work. Wrought framed and fixed in frames other frames and trusses of span upto 10 metres and height between ridge and floor level stacking the serviceable materials and disposal of un-serviceable materials with in 20 metres lead. Sectional area under 40 sq.cm..

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within 20 metres lead : G.I. Sheet roofing.

Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with hite ead complete excluding the cost of purlins refters and trusses: 0.63 mm thick sheet.

Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought framed and fixed in position: 2nd class deodar wood.

Providing and fixing commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately)-4 MM thick

Providing and fixing plain square edged cover fillets (beading) 40mmx12mm section with wood screws in ceiling and lining including mitring at junctions-Ist class Kail wood

Providing and fixing fly proof galvanised M.S. wire gauge of IS gauge designation 140 g with wire of dia 0.71 mm to windows and clerestory windows including 60x20 mm beading of: 2nd class deodar wood

Painting one or more coats on G.I Sheets with readymix paint of approved brand and manufecture on old work to give an even shade. White/Gray/Green Shade.

Painting two or more coats on G.I Sheets with readymix paint of approved brand and manufacture on new work to give an even shade. White/Gray/Green Shade.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter) sand papering and knotting. Readymixed paint brushing with white lead for priming.

Painting two coats(excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stoping With enamel paint other than white.

Painting one coat(excluding priming coat)on previously painted wood and wood based surfaces with enamel paint to given and even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping with white enamel paint.

Extra over item No. 1.20 for every subsequent coat of paint with white enamel paint.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

Distempering (one coat) with oil bound washable distemper of approved brand and manufacture and of required shade, on decorated wall surfaces to give an even shade, after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales and also including preparing the surface even and sand papered smooth.

Extra over item No 1.23 for every sub sequent coat of distempering with oil bound washable distemper of approved brand and manufacture.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surfaces (one coat) to give an even shade after thoroughly brushing the surface to remove all dirt, loose or softened paint.

Extra over item No.1.25 for every sub sequent coat of water proofing cement paint of approved brand and manufacture.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete: 300x16mm

Providing and fixing aluminium tower bolts (barrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete .

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931-15MM Nominal bore

arya shakti security and construction pvt ltd

ROSHAN LAL THAKUR