SPECIAL REPAIR /REPLACEMENT OF OLD STEEL WINDOWS IN 08 BLOCKS AT ANUJ VIHAR AND CERTAIN OTHER MINOR AND REVENUE WORKS UNDER AGE B/R -I OF GE SOUTH DELHI CANTT-10.

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rabbish off the premises complete all as specified and as directed.

M&L for Joint free Non Skid ceramic tiles 7 to 8mm thick coloured & joint free (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M& L for Joint free glazed coloured ,joint free ceramic tiles in vertical surface of size 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering on brick/concrete surfaces in cement mortar 1:4 in back of tiles as in dado complete all as specified and as directed.

M& L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

Providing edge moulding to 18-20 mm thick Granite stone any description of counters vanities etc, including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 20-25 mm thick as in floor, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC valave less, syphonic action type, flushing cisten, low level,white, with inlet, ball valve, float and handle including brackets and flush pipe for indian WC etc complete all as specified and as directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F CP Urinal spreaders complete all as specified and as directed.

S&F counter sunk vitreous china wash hand basin of size 550x400x140mm , ivory, including CP waste fitting complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan EWC (pedestal pattern ) P or S trap (excluding fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodised hinging device complete all as specified and as directed.

S&F 15 mm bore, Wash hand basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F PVC connection for 15 mm bore pipe, 450mm long with brass check nuts complete all as specified and as directed.

S&F 32/ 40 mm bore and 750mm long PVC Waste pipe suitable for WHB /Sink/ urinal complete all as specified and as directed.

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repairs 15mm brass chromium plated fancy type bib tap long body with flange fixed in 15mm bore of pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and as directed.

S&F in repairs 15 mm brass angle/ stop valves (fancy type), cast copper alloy , chromium palted, screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union complete all as specified and as directed.

S& F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and as directed.

S&F in repairs CP Health Faucet ABS body (Push type) with wall hook and 1.0 mtr SS Braded rubber hose pipe complete all as specified and as directed.

S&F in repairs 15 mm CP Bib cock 2 way with wall flange and single knobs complete with all fittings complete all as specified and as directed.

S&F Corner glass shelf 8-10 mm thick 300X200/ 400x200 mm with 'D' / F type brackets complete all as specified and as directed.

M & L for cutting chases for concealed water tubing or concealed conduct and making good cutting not exceeding 10 cm in girth in brick wall and making good in cement mortar 1:3 complete all as specified and as directed.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, including taking down of old GI tubing 15 mm bore complete all as specified and as directed.

S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, including taking down of old GI tubing 20 mm borecomplete all as specified and as directed.

Taking down cast iron pipes including fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings/pipes laid in trenches,floors or fixed to walls all as directed including earth work, demolition of PCC / Brick work complete all as specified and as directed for the following sizes of pipes:-

100 mm bore of pipe.

75 mm bore of pipe.

S&F cast iron sand soil waste or vent pipes (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good to match with existing surfaces complete all as specified and as directed for the following sizes of pipes:-

100 mm bore of pipe.

75 mm bore of pipe.

S&F in repair, cast iron branch pieces (ISI Marked), single (equal or unequal) ordinary of inverted spigot or socket type complete all as specified and as directed for the following sizes of pipes:-

100 mm bore of pipe.

75 mm bore of pipe.

S & F in repairs CI Bends (any radius ), diminishing pieces or tapers of 100 mm dia fitted with oval access door complete all as specified and as directed.

S & F in repairs CI Bends (any radius ), diminishing pieces or tapers of 75 mm dia fitted without oval access door complete all as specified and as directed.

S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100 mm bore pipes complete all as specified and as directed.

S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for75mm bore pipes complete all as specified and as directed.

S&F in repair PVC(SWR) pipes 110mm bore size single socketed, in any length with rubber ring joints, fixed to wall with and including MS flat iron clamp 25x 3 mm complete all as specified and as directed.

S&Fin repairs PVC(SWR) pipes 75mm bore size single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and as directed.

S&F in repair PVC(SWR) bends any radius, of 110mm bore size complete all as specified and as directed.

S&F in repair PVC(SWR) bends any radius,with threaded type door eye of 110mm bore size complete all as specified and as directed.

S&F in repair PVC(SWR) bends any radius, of 75mm bore size complete all as specified and as directed.

S&F PVC(SWR) bends any radius, with threaded type door eye of 75mm bore size complete all as specified and as directed.

S&F in repairs rotational moulded HDPE water storage tank 1000 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as directed.

S&F in repairs rotational moulded HDPE water storage tank 2000 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F in repairs 20 mm ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F gun globe or gate valve for 15 mm bore pipe with iron wheel had screwed both ends for iron pipe complete all as specified and as directed.

S&F gun globe or gate valve for 20 mm bore pipe with iron wheel had screwed both ends for iron pipe complete all as specified and as directed.

S&F galvanised iron tank nipple 15mm bore suitable for HDPE water tank complete all as specified and as directed.

Taking down door/window chowkhat or frame with shutters (without taking off shutters from the frame exc 1.5 sqm but nexc 4 sqm each complete all as specified and as directed.

S&F factory made solid panel coloured PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and botton rail on either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading. and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F solid coloured PVC doors frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm MS square tube of 19 guage, supply and fixing in opening as per specification & drg in SSR 2004 Part II complete all as specified and as directed.

S&F 100 mm size butt hinges medium weight stainless steel complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts, 150 mm long , of extruded section and fixed complete all as specified and as directed.

S&F aluminium handles, 150 mm size, Fabricated type, complete all as specified and as directed.

S&F door closer aliminium (die cast) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S & F brass mortice lock vertical type 6 lever of size 100 mm to 120 mm long with handle including taking down old mortice lock complete all as specified and as directed.

S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm length complete all as specified and as directed.

S&F powder coated (powder coating not less than 50 micron) anodized aluminium frame for partitions,doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F aluminum powder coated door shutter, aluminium section weighing not less then 0.55 Kg/m incl necessary jointing cleats, glazing clips rubber neoprene packing incl (a) 150mm handle - 02 Nos (b) Stainless steel hinges - 100mm - 03 Nos (c) Mortice lock in built 3 lever-01 Nos in each shutter, alum anodized snap beading screw etc complete all as specified and as directed. Note: Glass & particle board shall be paid measured and separately.

S & F 4.8 mm thick tinted glass fixed to aluminum frame work with rubber beading gasket complete all as specified and as directed.

S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed to aluminum framing complete all as specified and as directed.

M&L poweder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section (two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and as directed. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mmx44.45mmx1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminum snap beads complete all as specified and as directed. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

S& F Aluminium powder coated Grill (DECO grill) DG 103 of 7.5 mm thick, fixed with suitable 'F' Section (No 8584) 15.30X23.40X1.40 mm (minimum), fabricated and riveted to aluminium window / ventilators complete all as specified and as directed.

M&L for Aluminium anodised with powder coated door with shutter , chowkats /frame made with Aluminium section of size 100 x 44 x 2 mm thick vertical styles of shutters made with sections 84 x 44 x 2 mm thick and top / middle / bottom rail of shutter with sections 112 x 44 x 2mm thick including 5 mm thick tinted glass panes , inserted including necessary fixing arrangement ,jointing cleats ,glazing clips , rubber packing aluminium anodised beading, screw sets, floor stoppers, hinges, tower bolts 200 mm size, mortice lock 100 mm size 4 lever , round handles etc , fitted to shutter and frames fixed in positon including hold fast of size 25 x 3 mm flat 150 mm long 6 nos in each frame including cutting holes in brick work and embedded in PCC 1:2:4 bed block of size 150 x 150 x 150 mm each and match the existing surfaces complete all as specified and as directed.

S&F toughened glass 12 mm thick for urinal partion etc including all necessary SS fitting complete all as specified and as directed.

S & F floor mounted, snow white vitreous china single piece, double traps syphonic water closet of approved brand/ make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 ltr with dual flushing cistern, including all fittings and fixtures with seat cover, cistern fittings, nut bolts and gasket etc including making connection with existing P/S trap complete all as specified and as directed.

S & F table top wash basin of size 610x380x110mm catmax snow white colour including all fittings complete all as specified and as directed.

S&F waste coupling with ceramic pop-up full thread 32mm for WHB complete all as specified and as directed.

S&F brass chromium plated bottle trap of size 228 mm for wash hand basin with inlet and outlet screwd for pipe or connections including necessary packing, union and cap complete all as specified and as directed.

S&F CP pillar cock mixer 2-in-1 long body single handle for counter top wash basin complete all as specified and as directed.

S&F in repair white Vitreous China battery based infrared sensor operated urinal of size 610X390X370 mm (size may be changed as per model/brand) having pre to post flushing with water (250 ml & 500 ml consumption) having water inlet from back side including fixing to wall with suitable bracket all as per manufacturer's specifiecation and as directed.

Taking down steel windows complete of any description and shape and size and making good top, bottom and sides of window opening with cement mortar 1:4 complete all as specified and as directed.

S&F Aluminium windows with outer frame 40 mmx114 mm with 1.3mm thickness, corner 45 degree cut & aluminum welded center mulion size 40mmx65mm also welded, sutter size 40 mmx60mm 1.3 thickness 45 degree cut mechinacly joint with 6 mm alenkey bolt clamp , 12 mm SS 202 grade round bar at 100mm c/c distance in middle 150 mm c/c distance for safety grill welded at both ends with 6 mm SS 202 grade round bar, 5 mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock SS friction stay type hinges 2 nos per sutter, 40x18mm 45 degree cut & welded mosquito net shutter with aluminum 24 gaug mosquito net SS, 75mm long hinges & PVC megnat , full system powder coating not less than 50 micron with pure polyster coat of any shape, shade and size as approved by GE and fixing with SS screw rawl plug and filled with silicon complete all as specified and as directed. Note :- (i) For fixing of window AC/desert cooler the provn of window glass shutter, wire mesh, grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirement during the execution as per direction of GE. (ii) Ref Drwg No. CEDZ/TD-316 dt 07/11/2024

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling complete all as specified and as directed

M&L for renderning 15 mm thick in cement mortar 1:4 on any faces of brick/concrete surfaces finished even and fair without using extra cement complete all as specified and as directed.

M&L for rendring 10 mm thick in cement mortar 1:6 on any faces of brick /concrete surfaces finished even and smooth complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper white or tinted over and including wall care putty to make smooth surface including scaffolding arrangement, trestles, ladders etc complete all as specified and as directed.

M&L for preparation of old surfaces and applying two coat of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces on external wall/ ceiling, applying two more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance eterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm complete all as specified and as directed.

M&L for preparation of old plastered surfaces on external wall/ ceiling, complete removal of existing treatment, washing, rubbing down and stopping of painted surface andapplying two more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance eterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm complete all as specified and as directed.

Surface exacavation not exceeding 30 cm deep and averaging 25 cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type D-2, (40mm graded crushed stone aggregate) as in sub base of floor finishes complete all as specified and as directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block (PU moulded) of 80 mm thick any shape, size and color, M-40 Grade with grey cement and pigments including glossy coating ultra finish complete all as specified and as directed.

Removal of surplus excavated soils exceeding. 250m but not exceeding 500m and depositing where directed complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, bed blocks, bands and similar work including weathering rounded or chamferred angles and throating including necessary form work required complete all as specified and as directed.

Taking down carefully the old U/S Copper point wiring (light, fan, socket or power) complete Fitting such as switch, ceiling roses,pendants,socket, regulators , all type light Fitting, security light Ding Dong Bell , etc and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish complete all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable including PVC conduit medium grade and drawn through concealed PVC conduit with Modular steel terminal boxes factory made including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etc of required size complete including 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one 5 Amp switch one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) complete all as specified and as directed. Note :- The rate is inclusive cutting/chasing and making good disturbed surface with cement mortar 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash including Casing and capping wherever required complete.

All as per item No 93.00 here-in-before but One 5 pin socket outlet, 5/6 Amps, on independent board, with cables 1.5 sq. mm size with through concealed PVC/MS conduit.

All as Item No 93.00 here-in before but for one socket outlet 15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing with through concealed PVC/MS conduit.

S&F switch modular type, 1 way 6A, 1module complete all as specified and as directed.

S&F Modular Socket, 6A - 2/3 pin 2 module complete all as specified and as directed.

S&F switch modular type 1way 16A, 1module complete all as specified and as directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

S & F ceiling rose complete all as specified and as directed.

S&F recessed/surface mounting 36 watt 2' x 2' flat LED panel fitting with soft light and glare free symetrical ilumination suitable for False ceiling and getting electrically connected the fitting complete all as specified and as directed.

Taking down and refixing wall mounted LED integrated batten 20 W 4 feet after B/R work including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 4 feet, 20 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F Exhaust fan metal body, copper wound 300 mm sweep, 900 RPM, heavy duty with louver, including taking down of old exhaust fan and depositing to MES store yard and connecting up with replacement of cable and connecting up to ceiling rose complete all as specified and as directed.

M & L for opening of hole through out the wall as suitable for exhaust fan of size upto 300 mm and fixing of nut bolts with anchor fastner of suitable size and making good to disturbed surface complete all as specified and as directed.

Taking down of DB SPN/TPN 4/8 way and making good to disturbed surface of wall and complete all as specified and as directed

Taking down of MCB any type and capacity complete all as specified and as directed

S & F MCB DB SPN 6 way double door type (IP 43 protection) flush mounting complete all as specified and as directed.

S & F MCB SPN C curve 40 Amp 240 Volt 10 Ka complete all as specified and as directed.

S & F MCB SPN B curve 6-32 Amp 240 Volt 10 Ka complete all as specified and as directed.

Notes :- (i) The contract sum shall be after deducting the amount of Credit shown in Sch of Credit of this Tender. (ii) If any item of same description in nature is found to be entered as "double in BOQ" and the bidder quotes different rates against same item, then the rate quoted on lower side shall be applicable and higher rate will not be allowed to be paid in any circumstances. No claims on this account shall be entertained on a later date.

JINDAL ENTERPRISES (BID ID -3321276)

YP INFRA (BID ID -3314152)

H S KALSI AND BROS (BID ID -3314322)

M R INTERIOR HUB (BID ID -3314018)