Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹35.2 LAccepted-AOC | ₹35.2 L Quoted ₹35.9 L | L-1 | Accepted-AOC Being L-1. |
| 2 | L-2₹36.8 L+₹80,695 (2.24%)Rejected-Finance 42 INDUSTRIAL ESTATE GWALIOR MP 474004 | GWALIOR | GWALIOR | MP | 474004 | ₹36.8 L+₹80,695 (2.24%) | L-2 | Rejected-Finance Not being L-1 |
| 3 | L-3₹42.0 L+₹6.0 L (16.7%)Rejected-Finance | ₹42.0 L+₹6.0 L (16.7%) | L-3 | Rejected-Finance Not being L-1 |
| Sl No | Description | Qty | Unit | Lall Electronics L1 | lodhi builders L3 | M/s Mahesh Engineering Works L2 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, of area 3 sqm and below architrave, holdfasts etc. complete and stacking within 50 metres lead. | 120 | Each | 100 ₹12,000 Lowest | 300 ₹36,000 | 100 ₹12,000 Lowest |
| 2.00 | Providing and fixing factory made PVC door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm MS square tube, the vertical door frame profiles to be reinforced with 19x19 mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using MS screws of 65/ 100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. | 300 | RM | 400 ₹1,20,000 | 350 ₹1,05,000 Lowest | 450 ₹1,35,000 |
| 3.00 | Providing and fixing 30 mm thick factory made plain panel PVC door shutter consisting of frame made out of MS tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. MS frame shall have a coat of steel primers of approved make and manufacture. MS frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. | 100 | Sqm | 2,300 ₹2,30,000 Lowest | 2,400 ₹2,40,000 | 2,995 ₹2,99,500 |
| 4.00 | Providing and fixing float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). | 18 | Sqm | 1,100 ₹19,800 | 900 ₹16,200 Lowest | 1,500 ₹27,000 |
| 5.00 | Providing and fixing powder coated minimum thickness 50 micron aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge. | 150 | Each | 75 ₹11,250 Lowest | 300 ₹45,000 | 100 ₹15,000 |
| 6.00 | Providing and fixing 200x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. | 50 | Each | 125 ₹6,250 | 120 ₹6,000 | 75 ₹3,750 Lowest |
| 7.00 | Providing and fixing 150x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. | 99 | Each | 100 ₹9,900 | 90 ₹8,910 | 70 ₹6,930 Lowest |
| 8.00 | Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. | 75 | Each | 400 ₹30,000 | 300 ₹22,500 | 220 ₹16,500 Lowest |
| 9.00 | Providing and fixing 100x63x3.2 mm ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. | 226 | Each | 75 ₹16,950 | 125 ₹28,250 | 35 ₹7,910 Lowest |
| 10.00 | Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. | 10 | Each | 75 ₹750 | 165 ₹1,650 | 65 ₹650 Lowest |
Tender Value
₹44.5 L
EMD Value
₹89,020
Closing Date
4 May 2026, 6:00 pmClosed
GE I RND Delhi
MILITARY ENGINEER SERVICE, GARRISON ENGINEER (I) RND, LUCKNOW ROAD, TIMARPUR, DELHI-110054
SPECIAL REPAIR OF TOILETS IN TECHNICAL AREA OF DRDE GWALIOR UNDER GE I RND DELHI
2026_MES_760099_1
8225/T-125/E8
Open Tender
Civil Works
Item Rate
120 days
Gwalior
Class-D, Cat- a(i)
2 documents required · 2 mandatory
₹500
GE I RND Delhi
₹89,020
Yes
12 Aug 2026
13 Apr 2026
11 May 2026
13 Apr 2026
4 May 2026
27 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| - | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, of area 3 sqm and below architrave, holdfasts etc. complete and stacking within 50 metres lead. | - | Each | - | - |
| - | Providing and fixing factory made PVC door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm MS square tube, the vertical door frame profiles to be reinforced with 19x19 mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using MS screws of 65/ 100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. | - | RM | - | - |
| - | Providing and fixing 30 mm thick factory made plain panel PVC door shutter consisting of frame made out of MS tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. MS frame shall have a coat of steel primers of approved make and manufacture. MS frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. | - | Sqm | - | - |
| - | Providing and fixing float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). | - | Sqm | - | - |
| - | Providing and fixing powder coated minimum thickness 50 micron aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge. | - | Each | - | - |
| - | Providing and fixing 200x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. | - | Each | - | - |
| - | Providing and fixing 150x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. | - | Each | - | - |
| - | Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. | - | Each | - | - |
| - | Providing and fixing 100x63x3.2 mm ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. | - | Each | - | - |
| - | Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. | - | Each | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.61 MB
TDR.pdf
Tender Documents • 1.55 MB
BOQ_851387.xls
BOQ • 0.89 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .