Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.8 LAccepted-AOC NO 5 MOOGAMBIGAI NAGAR MANOJIPATTI ROAD M C POST THANJAVUR 613004 | THANJAVUR | TAMIL NADU | 613004 | L1 | Accepted-AOC Lowest bidder after negotiation | |
| 2 | L2₹22.0 L+₹93,327.38 (4.43%)Rejected-AOC | L2 | Rejected-AOC Other than the lowest bidder | |
| 3 | L3₹22.4 L+₹1.4 L (6.41%)Rejected-AOC | L3 | Rejected-AOC Highest bidder |
Tender Value
₹20.8 L
EMD Value
₹20,000
Closing Date
23 Dec 2024, 3:00 pmClosed
Superintending Engineer
Superintending Engineer, PWD, Heritage Buildings Circle, Chennai-05.
Special repairs and renewal of worn-out Electrical Installations in Old District Munisif Court at Thiruvaiyaru in Thanjavur District.
2024_PWD_508672_1
10/ HBC/ 2024
Open Tender
Electrical Works
Lump-sum
90 days
Thiruvaiyaru
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹20,000
Yes
28 Mar 2025
7 Dec 2024
23 Dec 2024
7 Dec 2024
23 Dec 2024
7 Dec 2024
Amount
Re-Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with continous earth wire connection of 1.5 Sq.mm cu.wire with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (4 points / Coil) Higher End
Re-Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with continous earth wire connection of 1.5 Sq.mm cu.wire with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End
Re-Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End
Renewal by Supply and fixing of Single Box Type 4'20W LED fitting with LED (Higher End) complete with T.W. round block on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting.
Renewal by Supply and fixing of Twin Box Type 4'20W LED fitting with LED (Higher End) complete with T.W. round block on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting.
Renewal by Supply and fixing of Twin box type 4'20W LED fitting with LED tube (Higher End ) with 2mtr conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting.
Renewal by Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 2mtr down rod with fan clamp with side plates and cross arm of size 450mm (18").
Renewal by Supply and fixing of 750mm sweep Wall mounting Air circulator Fan complete on the wall by Clamping on MS Coche Screws, Nuts and Connecting Leads.
Renewal by Supply and fixing of 300 mm (12") Sweep Heavy Duty AC Exhaust Fan complete with necessary wall opening and making good of the wall.
Renewal by Supply and fixing of louvers shutters arrangements for 300 mm (12") sweep (light duty) AC exhaust fan.
Renewal by Supply and fixing of 48W LED Street Light Fitting with LED (Higher End) with 32mm dia. GI Pipe (Class 'B') with 1 No 32mm GI Bend complete on the existing Post / On Wall with PVC Unsheathed Copper Leads With MS Clamps and Painting.
Renewal by supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .
Renewal by Supply and fixing of specially Heavy type water proof, Dust proof integral luminaries fitting provided with 150W LED flood light IP66 with control switch gears, Alglas coated reflectors, with cable connection etc: complete as per standard specification.
Renewal by Supply and Fixing of 12" Gong bell suitable for 230 Volts 50 c/s single phase AC supply on suitable TW Board with push switch.
Renewal by Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End.
Renewal by Supply and fixing of 2 no. 6A two module socket, 1no.6/16 A two module socket , 2 nos. 6A one module switch, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
Renewal by Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection. (For AC Plug)
Renewal by Supply and fixing of 6A to 32A DP MCB in DP Sheet Steel Enclosure in Flush with wall and making good of the concealed portion with Earth Connection. (Higher End)
Renewal by Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End.
Renewal by Supply and fixing of 3 phase 4-Way Horizontal TP and N MCB Sheet Steel Enclosure DB with double door (Metal) with 1 No 32A 4-Pole MCB Switch as incoming and 12 Nos 20/32A SPMCB as outgoing in flush with wall with earth connection only. (Higher End)
Renewal by Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End
Renewal by Supply and fixing of 63A Three Phase 4-Pole Change Over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.
Renewal by Supply and fixing of 63A TPN MC switch with suitable angle iorn frame work with MS cable entry boxes with earth connection only.
Renewal by Supply and fixing of TNEB Meter Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 11/2feet using angle iron of size 11/2"x11/2"x1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 11/2 feet of 6mm thickness with necessary bolts and nuts supports and Renewal by Supply and fixing of 3 Nos 63A fuse units (500V) 1No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16sq.mm PVC insulated copper wire with 1No 63Amp 30MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection with earth connection complete.
Renewal by Supply and fixing of 3 phase 63A aerial fuse unit for 3 Nos. 63A fuse units (500V) on suitable MS sheet covered with 6mm Thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps.
Renewal by Supply, installation, testing and commissioning of 2.0 TR (6000 K.cal/Hr) ABS Plastic Split type Air conditioner conforming to IS 1391 (Part-2) 1992 with Amdt No. 1 to 2 fitted with Rotory compressor operating on Non CFC Refrigerant suitable for wall mounting for operation on 230V, 50HZ single phase AC supply with 5 star rating of as per BEE specification and capable of performing the functions of 1) Cooling 2) Dehumidifying 3) Air circulation 4) Filtering The installation works for the above split type AC units includes the following. 1.Mounting / Fitting Indoor and outdoor units at their respective locations. 2. Laying refrigerant pipeline of required length connecting not exceeding 3 metre Length and both units after drilling hole/holes in the wall if required. 3. Insulating the suction pipe with expanded polyeurethene foam 5mm tubing. 4. Laying 25mm dia flexible PVC drain pipe to throw out the condensate water being formed within the indoor unit. 5. Leakage testing the entire system unit. 6. Charging refrigerant gas in the unit. 7. Suitable electric wiring to be provided with 2.5 Sq.mm PVC insulated copper wire between indoor and outdoor units up to 6 Mtrs length and up to switch within 3 Meters of location of indoor unit.
Renewal by Supply and fixing of 5 KVA electronic automatic voltage stabilizers with input range of 170-270V and output range 200-240 V with high and low voltage cut off and 3 minutes time delay relay with demonstration. Suitable for Operation on 230 v/50Hz single phase AC supply. (V Guard / eq)
Renewal by Supply and fixing of angle Iron Frame work to fix the Outdoor unit.
Renewal by Supply & Laying of 5/8" and 3/8" Copper Pipe.
Renewal by Supply and fixing of Water drain pipe line (1" PVC Pipe)(SR)
Renewal by Supply erection testing and commissioning uninterrupted power supply (UPS) OFFILINE (Pure Sine wave) with copper wound Transformer of 1500VA with input voltage 24V DC supply output voltage 230V-50Hz AC supply with 150 AH Tubular Battery to work at full load capacity including transportation with following specifications and with following accessories and with 2 hours of battery back up at full load respectively. 1. Input Voltage : 230V, 50 Hz Single Phase AC Supply. 2. Output Voltage : 220V to 240V 50Hz AC supply. 3. Battery charging device of suitable rating 4. Circuit board suitable capacity. 5. Over load and short circuit protection. 6. Visual Indication for ON/ OFF/ Trip/ Battery Charging/ Mains Failure/ Low Battery et., 7. Mode Setting For Bypass / Reset. 8. 12V 150AH Battery - 2 Nos. 9. Trolly for heavy UPS & Battery. (Make : Exide / Microteck / Amron / Equivalent)
Renewal by Supply and run of 2 of 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and nceiling and making good of the concealed portion with suitable colour.
Renewal by Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion.
Renewal by Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour.
Renewal by Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour.
Renewal by Supply and run of 4 of 6sqmm PVC insulated SC unsheathed FRLS Copper Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm copper wire and making good of the concealed portion with suitable colour.
Renewal by Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed portion with suitable colour.
Renewal by Supply and Run of 4 of 10 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade on 7/20 GI wire for service connection mains.
Renewal by Supply and Run of 4 of 10 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in 32mm dia GI pipe (class B ) suitably bent at both ends with necessary angle iron upright and end support for service connection mains.
Renewal by Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
Renewal by Supply and clamping of 3½ X 35 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
Renewal by Supply and fixing of brass cable gland for 3½ X 35 sq.mm PVC Armoured LTUG Cable with earth connection.
Renewal by Supply and providing cable end termination of 3½ X 35 sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.
Renewal by Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
Renewal by Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
Renewal by Supply and fixing of brass cable gland for 4 x 10 sq.mm PVC Armoured LTUG Cable with earth connection.
Renewal by Earthing as per ISI Specification with an Earth electrode of 2.10 Mtr. Class 'B' GI pipe of dia not less than 40mm with Copper Earth Plate of size 125mmX50mmX6mm with Necessary Funneling Arrangements with Necessary Masonry Work and with 38mm RCC Cover Slab for the Brick Masonry.
Renewal by Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.
Renewal by Supply and installation of unmanageable 16 port 10/100/1000 Mbps switches with 1G uplink and 24 port Jack Panel. Make:Cisco or Hp or Netgear or equivalent
Renewal by Supply,Installation and termination of Cat 6 UTP Patch cord of 1 metre. Make:DLink or ADC or Molex or Digilink or equivalent
Renewal by Supply,Installation and termination of RJ45 Cat-6 IO connector,Back box,face plate with surface mount. Make :Dlink or ADC or Molex or Digilink or Legrand or equivalent.
Renewal by Supply and installation of 4MP high resolution IR Bullet Camera with 1/3" Progressive scan CMO,HD video output,Day &Night IR Cut Filter,4MM (Angle of View 80degree)Lens,Low illumination,maximum 20fps,3D DNR & DWDR & BLC,IR range: up to 30m,Water and dust resistant (IP67) Make and Model:Prama Hikvision or UNV or Matrix or equivalent.
Renewal by Supply and installation of 10 / 100/1000Mbps 08 Port Gigabyte PoE Switch with 8 × Gigabit PoE ports, 2 × Gigabit fiber optical ports. Make and Model:Netgear or Cisco or D link or equivalent
Renewal by Supply and installation of 8Channel Network video Recorder Connectable to the third-party network camera,Support live view, storage, and playback of the connected camera with up to the resolution of 5 megapixels and1 SATA hard disks can be connected. Make and Model:Hikvision or Dahua
Renewal by Supply and installation of 4TB Hard Disc drive recording capacity NVR with USB 3.0 connectivity. Make and Model:Western /seagate/ Equivalent.
Renewal by Supply and installation of 32 inches Smart HD TV with 2 Nos of HDMI port with tilting Stand and 2 Nos of USB port with full HD resolution of 1920X1080 pixels. Make and Model:Sony/ Samsung/LG or equivalent
Renewal by Supply and run of UTP Cat6 cable through existing pipe concealed in the wall/ceiling with necessary connection Make : Finolex or Dlink or equivalent
Renewal by Supply and laying of ISI approved 25 mm PVC rigid pipe concealed on wall and ceiling with painting of suitable colour. Make : Finolex or Dlink or equivalent
Renewal by Supply and installation 4U MS Rack for housing Switches,Jack Panel with top and Bottom Cable Entry provision along with necessary power distribution unit,cable manager,fan and Lockable Toughened Glass Door.
Renewal by Supply and installation 6U MS Rack for housing Switches,Jack Panel with top and Bottom Cable Entry provision along with necessary power distribution unit,cable manager,fan and Lockable Toughened Glass Door.
KARTHIKEYAN ELECTRICALS (BID ID -1215975)
U.S. ELECTRICALS (BID ID -1216054)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_605041.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .