RATE CALL FOR VARIOUS ITEMS FOR MC WASHIM .

Providing, fabricating and installing compact leaf-inspired decorative CNC metal motif panel/frame, approximately 450 mm wide × 1,200 mm high above median top, at locations as directed by the Engineer-in-Charge. The work shall include laser-cut 2–3 mm thick decorative MS/GI sheet, fixed to a supporting frame fabricated from 40 × 40 × 2.5 mm MS square hollow section (SHS) pipe, with 50 × 50 × 3 mm MS square hollow section vertical support posts, subject to structural design approval. The item shall include designed base plates, anchor bolts, brackets and all necessary fixing accessories. Structural members, base plates, connections and anchorage shall be verified and approved by a qualified structural designer for applicable wind loads and site conditions. All steel components shall receive hot-dip galvanizing or an approved corrosion-protection treatment, followed by a compatible exterior-grade powder-coated finish in the approved colour. The work shall include cutting, welding, grinding, smooth edge finishing, transportation, installation, alignment, secure and tamper-resistant fixing, sealing of potential water-trapping points, labour, materials, tools and equipment required for complete execution. All exposed edges shall be free from sharp projections. Complete as per approved shop drawings, structural design and directions of the Engineer-in-Charge.

Providing, fabricating and fixing decorative leaf-motif sleeve/band for existing street-light poles, approximately 300 mm wide × 800 mm high, complete with laser-cut 2–3 mm thick decorative MS/GI sheet fixed to a supporting frame fabricated from 25 × 25 × 2 mm MS square hollow section (SHS) pipe, including split-clamp brackets, mounting plates, fasteners and necessary accessories. The sleeve/band shall be designed to suit the actual pole diameter and profile, with secure fixing without damaging the existing pole. All components shall receive hot-dip galvanizing or an approved corrosion-protection treatment followed by compatible exterior-grade powder coating in the approved colour. The work shall include fabrication, cutting, welding, grinding, smooth edge finishing, transportation, installation, alignment, labour, materials, tools and equipment, complete as per approved shop drawings and directions of the Engineer-in-Charge. Drilling, welding or permanent attachment to existing street-light poles shall not be permitted without prior written approval and verification of pole capacity by the competent authority. Where the existing pole cannot safely support the motif, an independently supported structure shall be provided under an approved design.

Providing, fabricating and fixing circular heritage/local-story artwork panel, nominal diameter 450 mm, made of 2–3 mm thick laser-cut MS/GI sheet or approved engraved metal/weatherproof composite panel, depicting approved Washim heritage, agriculture, environment or local-culture themes. The panel shall be fixed to a supporting frame fabricated from 25 × 25 × 2 mm MS square hollow section (SHS) pipe, including mounting brackets, concealed/secure fasteners and necessary accessories. The item shall include approved vector artwork preparation, cutting, engraving or fabrication, smooth edge finishing, anti-corrosion treatment, exterior-grade powder coating or approved weatherproof finish, replaceable artwork insert, transportation, installation, alignment, labour, materials, tools and equipment, complete as per approved shop drawings and directions of the Engineer-in-Charge. The contractor shall submit vector artwork and one full-size sample for approval before bulk fabrication. Installation shall maintain required traffic clearances and visibility.

Providing, fabricating and fixing civic identity/message fascia panel, nominal size 600 × 300 mm, comprising a 3 mm thick aluminium composite panel (ACP) or approved weather-resistant metal panel with dark charcoal background and contrasting exterior-grade lettering/graphics in Marathi and/or English. The panel shall include UV-resistant and weatherproof lettering/graphics, approved typography, anti-graffiti clear protective coating where suitable, concealed or flush-mounted secure fixing brackets and all necessary accessories. Where a metal support frame is required, it shall be fabricated from 25 × 25 × 2 mm MS square hollow section (SHS) pipe, with suitable corrosion protection and exterior-grade powder coating. The work shall include artwork/layout preparation, cutting, fabrication, edge finishing, transportation, installation, alignment, labour, materials, tools and equipment, complete as per approved drawings and directions of the Engineer-in-Charge. All text, logos and civic claims shall be approved by the competent authority before fabrication.

Providing, fabricating and installing Washim identity/gateway monument panel of indicative size 600 mm wide × 1,800 mm high at approved widened nodes, comprising an architectural stone-look finish or metal-faced panel with approved Washim Municipal Council name, emblem and bilingual lettering, including a supporting frame fabricated from 50 × 50 × 3 mm MS square hollow section (SHS) pipe, suitable base plates, anchor bolts, mounting brackets and necessary accessories. The metal components shall receive hot-dip galvanizing or an approved corrosion-protection treatment followed by exterior-grade powder coating. The panel shall include UV- and weather-resistant lettering/graphics, smooth edge finishing and optional concealed warm-white LED illumination with suitable outdoor-rated fixtures, drivers and protected wiring, as specified. The item shall include artwork preparation, fabrication, transportation, foundation and anchorage as per approved structural design, installation, alignment, electrical connections where applicable, testing and commissioning, labour, materials, tools and equipment, complete as per approved drawings and directions of the Engineer-in-Charge. The foundation, structural stability and wind resistance shall be designed and certified by a qualified structural designer. Installation shall be permitted only at surveyed widened nodes, subject to approval of the competent road authority and maintenance of required sight triangles, traffic visibility and clearances.

Providing and installing compact modular planter/pocket modules of approximate size 450 mm (W) × 600 mm (L) × 350 mm (H), manufactured from exterior-grade RCC, FRP or corrosion-protected metal, as approved by the Engineer-in-Charge. The unit shall include a durable weather-resistant finish, adequate drainage outlets, drainage layer and filter arrangement, root-zone protection, planting medium, and suitable provision for horticultural planting. Where a metal frame or support is required, it shall be fabricated using suitably sized MS SHS sections, tentatively 25 × 25 × 2 mm, with connections, base plates and anchor fasteners as required by the approved design. All exposed metalwork shall receive approved anti-corrosion treatment and exterior-grade powder coating or equivalent protective finish. The item shall include fabrication, supply, transportation, positioning, anchoring where necessary, finishing, drainage provisions and installation complete. The finished module shall not project beyond the existing median width or obstruct pedestrian movement, traffic visibility, drainage, utilities or access to street-light poles. Installation shall be restricted to surveyed clear spaces between poles and other features, subject to verification of median dimensions, structural capacity and approval of the Engineer-in-Charge. Final material, dimensions, fixing details and planting arrangement shall be approved before execution.

Providing, supplying and installing LED outline lighting for decorative leaf motif structures, comprising outdoor-rated, warm-white LED strip or linear luminaires of nominal 3000 K colour temperature, housed in compatible aluminium profiles with diffuser covers wherever required. LED assemblies exposed to weather shall have a minimum IP67 protection rating, with UV-resistant insulation, weatherproof end caps, sealed joints, connectors and mounting accessories. Aluminium profiles and brackets shall be securely fixed to the approved motif structure without damaging its protective coating. The system shall include suitably rated, accessible and replaceable LED drivers, weatherproof junction boxes, protected cabling, conduits, connectors, earthing, circuit protection and all necessary electrical accessories for a complete installation. Electrical connections shall comply with applicable electrical safety standards and be carried out by qualified personnel. Wattage, power supply, circuiting, cable sizing and driver capacity shall be finalised through an approved lighting design. The installation shall provide uniform illumination without glare, distraction or direct light spill towards road users. The item shall include supply, mounting arrangements, installation, testing, commissioning and all incidental work, complete as approved by the Engineer-in-Charge.

Providing, supplying and installing backlighting for heritage artwork panels using outdoor-rated LED modules or linear LED luminaires with suitable diffuser/backing arrangements to achieve uniform illumination without visible hotspots. The system shall include heat-management provisions, weatherproof enclosure, replaceable LED driver, sealed cable entries, suitable connectors and all necessary mounting accessories. LED components shall be protected against moisture, dust and outdoor exposure, with an appropriate IP rating selected for the installation conditions. The assembly shall be designed to prevent water ingress, overheating, glare and uneven light distribution. All wiring shall be suitably insulated, concealed or protected in approved conduits, and connected through appropriate electrical protection. The item shall include supply, installation, testing and commissioning, complete as approved by the Engineer-in-Charge.

Providing, supplying and installing concealed low-level linear LED accent lighting at designated decorative fascia sections, using warm-white LED luminaires of nominal 3000 K colour temperature, housed in exterior-grade aluminium channels with suitable diffuser covers. The system shall include replaceable LED segments, end caps, mounting brackets, protected cable entries, weatherproof connectors, suitable drivers, junction boxes and all required electrical accessories. Exposed LED assemblies shall have a minimum IP67 protection rating, while other components shall have IP protection appropriate to their actual exposure conditions. All metal channels and brackets shall have a durable corrosion-resistant finish. Wiring shall be concealed or suitably protected, with accessible provisions for maintenance and replacement. The installation shall provide uniform accent illumination without glare or distraction to road users. The item shall include supply, installation, electrical connections, testing and commissioning, complete as approved by the Engineer-in-Charge.

Providing, supplying and installing shielded outdoor LED uplights of indicative 10–15 W rating and nominal 3000 K colour temperature, suitable for illuminating selected artwork panels and planting features. Each fixture shall be outdoor-rated with a minimum IP65 protection rating, upgraded to IP67 wherever exposed to water accumulation, dirt or similar conditions. The luminaire shall incorporate glare-control shielding, a suitable beam angle, corrosion-resistant housing, secure mounting arrangements, replaceable driver, weatherproof cable glands and compatible electrical accessories. The beam shall be aimed towards the intended artwork or planting feature and away from drivers, pedestrians and adjoining properties. Wiring shall be suitably insulated and protected, with appropriate earthing and circuit protection. The item shall include supply, mounting, aiming, installation, testing and commissioning, complete as approved by the Engineer-in-Charge.