REPAIR/MAINT TO BLDG WORK PERTAINING TO PLUMBING, TILING, JOINERY AND SANITARY AND OTHER MISC WORK IN VARIOUS BUILDING IN DOMESTIC AREA AT AF STN UTARLAI

Amount

M&L for rendering 15 mm thick in CM 1:6 on stone masonry/concrete surfaces/ brick / PCC block surface, finished even and smooth without using extra cement including taking down old cement plaster complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on stone masonry/concrete surfaces/ brick / PCC block surface,Finished even and fair without using extra cement including taking down old cement plaster complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces in ceiling including finishing even and smooth without using extra cement including taking down old cement plaster complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over a coat of chalk whiting all as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted, all as directed.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying two coats of white wash.

Hacking out old broken glass (any thickness, size quality of description) from metal frame including punching or drilling out old glazing pins./springs clips complete all as specified and directed.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc. 0.5 sqm in each pane.

S&F sheet glass 5mm thick, ordinary quality of area exc 0.5 Sqm each pane and fixed with aluminium beading & rubber gasket/wooden beads complete all as specified and directed.

Supply & Fix as in repairs 3 mm thick frosted glass ordinaary quality and glazing with oil putty in sqaure n.exc 0.5 sqm in each pane complete all as specified and directed

S&F in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples and including with wooden beading supplied.

Supply & Fix as in repair 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed

Supply & Fix as in repairs aluminium alloy anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium complete all as specified and as directed

Supply & Fix in repairs hasp and staple of size 100 mm aluminium anodised wire type including bolt to hinges plate and fixed with screws complete all as specifed and directed

Supply & Fix in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm long complete all as specified and directed

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm.

Supply & Fix as in repair 18/19 mm thick prelaminated particle board interior grade, prelaminated both side face with decorative choice lamination one side and other side balancing white, fixed with screws or timber leaping on cutting exposded edges polishing complete as in built in shelves, cabinets , kitchen cupbords, modular kitchen drawer and almirah shutters or other placed complete as in built in shelves, cabinets partions etc . complete all as specified and directed.

S&F in repairs magnetic wardrobe ball catcher suitable for shutters fixed with nut,screw and washers of mild steel,bright finished.

S&F in repair Butt hinges,75 mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised & fixed type C-21.

Supply & Fix in repairs aluminium anodised barrel tower bolt or extruded section length of bolt 150 mm long complete all as specified and directed

M&L for 20-25mm dia stainless steel curtain rod with brackets projected type/wall to wall and knobs at both ends as per site requirement including taking down old existing rod of any description with accessories complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S&F in repairs bath PVC cabinet mirror of size 450x600 mm Make- Prayag / commander / Polytuf/ shakti

S&F in repairs tubular towel rail, brass chromium plated, 20 mm dia ''D'' type, 60 cm long between flanges and fixed complete all as specified and directed.

S& F in repairs 150mm ordinary rat rail rod pattern springs heavy duty including roller and roller plate complete all as specified and directed.

Taking down chowkats or frames with shutters/ window (Without taking off shutters from the frame) n.exc 1.5 sqm each .

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site all as directed.

S & F in repair 100 mm Aluminium Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21all as spd and dircted.

S&F in repair Aluminum tower boltes of extruded section of size 150mm.

S&F in repair Aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size

Supply & Fix in repair 150 mm long extruded aluminium alloy handles, fabricatee type anodised complete all as specified and as directed

S & F 2nd class HW 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated.

S&F 2nd class HW 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars)

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each, resecuring, easing, repairing,adjusting and refixing in the same opening.

S&F factory made flush shutter 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S/F 25 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides.

S&F in repairs 25 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in kitchen cupbords, modular kitchen drawer and almirah shutters or other placed as specified and directed by Engr-in-charge.

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (without takking off shutter from the frame).

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each complete all as specified.Note : door shutter shall be taking down and re-fixing in separate item :

Taking down ventilator with frame nexc 1.0 sqm each of any description and any position complete all as specified & directed.

S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:4 and 2 coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.

S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 and 2 coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.

All as per Sl item 45 above but of size 75 X 60 mm as in cupboard frames.

S&F in repair Aluminium hasp and staple 100 mm size complete all as specified and directed

S&F in repair 40 mm dia PVC cupboard knob fixed with nut and screw and washer all as direcrted by Engr-in-Charge.

S&F three track aluminum anodised sliding window with three sliding shutter , the size of outer frame three track 100 x 37x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including anodised aluminium grill and all necessary fittings complete all as specified and directed.

S&F in repair fixed type aluminium anodised window with upper panel shall be fixed and provision of 02 Nos glass shutter openable at lower portion for window AC provision , shall be provided with 4 nos aluminum 75mm long hinge with 5mm thick tinted sheet glass 4 Nos tower bolt 100mm long all necessary fittings arrangement complete using aluminium frame section of window 63.5x38x1.5mm thick and shutter frame section 37x18x1.2mm etc complete all as specified.

S&F for fixed type aluminium anodised ventilators with provision of bottom panel in fixed glazing of 3mm thick glass and top shutter shall be provided with 2 nos aluminum 75mm long hinge at upper side with 3mm thick sheet glass including 4 mm dia stainless steel 2 Nos stay, tower bolt 100mm long 1 Nos, anodised aluminium grill with aluminium chanel including 0.36mm dia stainless steel wire cloth and average aperture 1.4mm and all necessary fittings arrangement complete using aluminium section 65x40x1.5mm thick etc in frame and shutter frame aluminium section size 37x18x1.2mm complete all as specified.

S&F for anodized aluminium anodised brown/Ivory colour door with frame made of anodized aluminum frame size 101x44x2mm thick and anodized aluminum shutters having bottom rail of size 114x44x2mm ,top rail 83x44x2mm, middle rail 85x44x2mm with two numbers of disc/D type handle in each shutter, 200mm size aluminum tower bolts 02 Nos, brass lock 04 levers and key, glazing with 5mm thick tinted glass in upper panel and with 12mm thick pre laminated particle board in lower panel including rubber gasket, aluminum beading compete all as directed.

S&F for anodized aluminium anodised brown/ivory colour door with frame made of anodized aluminum frame size 101x44x2mm thick and anodized aluminum shutters having bottom rail of size 114x44x2mm ,top rail 83x44x2mm, middle rail 85x44x2mm with two numbers of disc/D type handle in each shutter, 200mm size aluminum tower bolts 02 Nos, brass lock 04 levers and key, glazing with 5mm thick tinted glass in upper panel and lower panel including rubber gasket, aluminum beading compete all as directed.

S&F in repairs aluminium door closer hydraulic regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete

S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S & F aluminium door strip with bush and rubber gasket suitable for wooden doors to cover gap between door and floor etc complete all as specified and directed by Engr-inCharge.

M & L for in repair provision of neoprene /EPDM rubber gasket for aluminium doors/ window glass fixing complete all as specified

M & L for preparations of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specifified and directed.

Supply and laying 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old steel tubing, connections with fittings all as specified and directed.

(- ditto - all as per item no. 59 above but 20mm bore

Refixing old steel tubing, 15 mm bore, and connections in new or old position with necessary Tee/socket/Union/elbow including taking down old steel tubing, connections with fittings of same dia and cleaning for re-fixing (Walls, ceiling, floors, etc.)

(- ditto - all as per item no. 61 above but 20mm bore

Cutting chases, pinning in, making good to facings in brick/stone masonry where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20cm girth

S&F in repairs 15mm dia CP wall mixer/ WHB mixer/ sink mixer, chromium plated for mixing hot and cold water,with capstan head, screwed down for iron pipe and fixed for brass ferrule complete all as specified and directed.

S&F in repairs 15mm dia wall mixer, chromium plated with 3 way telephonic shower arrangements/ L-bend for shower type , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm bore pillar tap fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete.Cera / Seiko / Parryware/jaquar

S&F in repairs, 15 mm bore stop valve/ angle valve fancy type cast copper alloy chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.

S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and including re-fixing of old cistern, bend pipe if required complete all as specified.

S&F in repairs Vitreous china water closet (Sqating Pattern) "Orissa Pattern" size 580x440mm white with 'P' or 'S' trap front or back inlet and integral foots rest any pattern including connecting pipe of CI at suitable bore and length and incl re-fixing of old Cistern, flush pipe etc if required & set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish etc out side of MOD land complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and suitable length, complete all as specified.

S&F in repair sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410mm x 330 mm x 160 mm, including brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F In repairs PVC connection 15 mm size with PTMT nuts of length 600 mm.

S&F in repairs waste fittings 32mm, brass, chromium plated suitable for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F in repairs 32 mm dia PVC flexible pipe fixed as waste pipe for WHB/ kitchen sink/ urinals inclding connecting to waste coupling with PVC couplers, elbow etc. complete all as spcified and directed.

S&F in repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene of low or high density in repairs. (including dismantlling of half turn valve 32 mm of any description , if required)

S&F in repair grating dome 125 mm dia of stainless steel with or without hole complete all as specified.

S&F in repairs chromium plated Jet spray with chromium plated finish including complete accessories complete all as specified and directed.

S&F in repairs chromium plated shower rose 80 mm dia with CP arms, with or without swivel joints, including fixing to 15 mm steel pipe or union complete all as specified and directed.

S&F in repairs 15 mm bore quarter turn two way angle cock/ bib cock capstan head, cast copper alloy, CP high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipes or for brass ferrule complete all as specified and directed.

S& F in repairs brass chromium plated health faucet of approved make and standared size with necessary chromium plated finish flexible pipe of min length 1.0 mtr inlcuding all other arrangements of 15mm bore and fixed complete all as specified and directed.

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. Make: Hindware/Parryware

S&F in repairs CP towel ring of approved make all as specified and directed.

S&F in repairs straight 5.50mm thick sheet glass shelf 600 mm long and 120mm wide with Cromium plated railing , mounted on decorative chromium plated bracket, assembly set complete all as specified and directed.

S&F in repairs straight 5.50mm thick sheet glass corner shelf 300mm x 300mm size in quarter circle shape or rounded at one side with Cromium plated railing , mounted on decorative chromium plated bracket assembly set complete all as specified and directed. Note : sample of glass shelf shall be provided/ decided by Engineer-In-Charge.

S&F in repair choromium plated soap dish complete all as specified and directed.

S&F in repair choromium plated toilet paper holder complete all as specified and directed.

M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 including dismantling of old tiling complete all as specified and directed.

M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 including dismantling of old tiling complete all as specified and directed.

M&L for glazed ceramic tiles, coloured, 350mmx 250mm x7 mm/450 x 350 x 7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces including dismantling of old tiling complete all as specified and directed.

M&L for glazed ceramic tiles, coloured, 200mmx 3000mm x7 mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone/ block masonry surfaces including dismantling of old tiling complete all as specified and directed.

Material & Labour for vitrified ceramic light shade/dark shade coloured tiles 10 mm thick (Square/Rectangular) polished,area of each tiles n exc 0.36 Sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) including dismantling of old tiling complete all as specified and directed.

Material & Labour for vitrified ceramic light shade/ dark shade coloured tiles 10 mm thick (Square/Rectangular) polished,area of each tiles exc 0.42 Sqm but nexc 1.0 sqm each tile in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) including dismantling of old tiling complete all as specified and directed.

M&L for granite (of any type) work rubbed and polished in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick cement screed in CM 1:6 including demolition of old stone slabs and tiles complete all as specified and directed.

M&L for rounding to the edges of granite stone slabs for kitchen platform and window cills etc complete all as specified and directed.

S & F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 15mm bore iron pipe and fixed. (Minimum weight 20mm - 2 1 0 gms )

Supply and fix in repairs PVC water tank cover suitable for 500ltrs/1000ltrs capacity rotational moulded polyethylene water storage tanks.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/false ceiling /slabs/ blankets, any thickness, including cover fillets and framing complete

S&F anodised aluminium snap grid frame work for false ceiling size of grid 605 X 605 mm all as specified.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F Providing and fixing Gypsum Board 8-10 mm thick laminated with pvc decorative type sheet at one face and Pvc film on another face in ceiling fixed with screw as per manufacturers instructions complete all as specified

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection including demolition of old cement concrete complete all as specified and directed.

M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate in filling back of PS Chawkhat/frame and in bed blocks to hold fasts, or other places as required including making good to the disturbed portion complete all as specified and directed.

Supply and fixed in repairs one piece viterous china floor/wall mounted superior quality , Ivory / white colour wash down water closet (Pedestal pattern), with "P" or "S" CI trap with inbuilt low level Eco twin button flushing cistern and seat cover etc. complete in all respect as specified and directed by Engineer-in-Charge .

S & F in repair 15mm bore Chromium plated quarter turn central hole basin mixer with aerator inclduing flange , necessary fixing for 15mm bore size pipe complete all as specified and directed. Cat No. SOL-6167B of jaquar or Equivalent

M & L in repair for oval shape WHB (590 x 420 x 195) viterious China white incl fixing, waste coupling & PVC waste pipe of 32 mm dia all as directed.

S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with inlet / out let tank nipple , 20mm bore PVC float valve including dismantling of old water tank complete all as specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position , inlet / out let tank nipple , 20mm bore PVC float valve including dismantling of old water tank complete all as specified and directed.

M&L PCC for 20cm thick precast cement concrete Type C1 1:3:6, block masonry with solid block, set in CM 1:6 including demolition of old stone/boulder masonry complete all as specified & directed.

M & L for 75 mm thick PCC 1:4:8 type D-2 (40 mm graded stoneaggregate) finishing the surface with even and fair without using extra cement all as directed inluding demolition of old concrete complete all as specified and directed.

M&L for 75mm thick PCC (1:2:4) type B-1, as in floors finished even and smooth without using extra cement all as directed. inluding demolition of old concrete. .

M&L for rubber moulded coloured chequered cement concrete tiles, 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, laid over and including 15mm thick screed bed in CM 1:6 including dismantling of old tiles complete all as specified.

M&L for heavy duty Endura vitrified parking tiles with mat finish or as required , 30cmx30cmx10mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, laid over and including 15mm thick screed bed in CM 1:6 including dismantling of old tiles complete all as specified.

M&L Providing, Plain cement concrete B0, 1:2:4 using 12.5mm aggregate in roof kerbs or mud stops, rounded or chamfered on edges

Providing precast cement concrete louvres and jallies (Type B1 1:2:4 (12.5 mm graded aggregate), 35 mm thick (measured solid), including all mouldings but excluding frame set in CM 1:4 including demolition of old precast RCC articles built in cement mortar complete all as specified and directed

Cutting openings through walls in cement mortar for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, and removing surplus to store and rubbish off the premises

Forming jambs, etc. in CM 1:4, to openings (to foregoing item), with stone supplied by MES including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work, complete

S&F in repair cast iron floor trap,Nahani trap 75 mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B -1, 1:2:4 complete all as specified.

S&F in repair 75 mm bore cast iron bends with oval access door (any radius),TEE/Socket/ branch pieces/cowl diminishing pieces or tapers (larger bore measured).

S&F in repair 100 mm bore cast iron bends/Tee/sockets/ branch pieces/Cowl (any radius), diminishing pieces or tapers (larger bore measured) jointed in cement CM 1:2 complete .

S&F in repairs 100 mm CI connection socket/ bend/ Branch piece to fit out let of WC or other places as required CI bend/Tee with oval access door jointed in cement CM 1:2 complete

Dismantling and breaking up drain pipes, (Cast iron or reinforced concrete) 75 mm (internal dia) set in cement mortar .

Dismantling and breaking up drain pipes, (Cast iron or reinforced concrete) 100 mm (internal dia) set in cement mortar .

S&F cast iron soil, waste and vent pipes of 75 mm bore in any length with or without ers, with cement joints, laid in trenches or in floors or fixed to wall as specified & as directed.

All as per Ser item No 147 here-in-before but 100 mm bore and laid in trenches or in floors or fixed to wall as specified & as directed.

M&L cleaning of existing tanks of any description provided on roof including removing all scale and dirt etc. from tanks and from mouth of circulations pipes and washed with beaching powder all as directed by Engineer-in-Charge capacity exc 250ltr and not exc. 500 ltrs. Note :- Date of cleaning shall be marked on tank with synthetic enamel paint.

M&L cleaning of existing tanks of any description provided on roof including removing all scale and dirt etc. from tanks and from mouth of circulations pipes and washed with beaching powder all as directed by Engineer-in-Charge capacity exc 500ltr and not exc. 1000 ltrs. Note :- Date of cleaning shall be marked on tank with synthetic enamel paint.

M&L Sand filling under floors as cushi-oning including watering and conso-lidation all as specified and directed.

M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement & pigment.

M & L for 100 mm thick PCC 1:4:8 type D-2 (40 mm graded stoneaggregate) finishing the surface with even and fair without using extra cement all as directed inluding demolition of old concrete.

M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3114341)

National Rewinding Works (BID ID -3131187)

S.K. INFRASTRUCTURE (BID ID -3124363)

M/s Sati Jasnath Enterprises (BID ID -3130093)

Devi Engineeing (BID ID -3132111)

M/S Tanisha Traders (BID ID -3132735)