Repair/ Maintenance of internal electrification AGE E/M ES under GE(U) E/M Meerut Cantt

Amount

M&L for submain wiring comprising two single core ,6 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including PVC concealed conduit and conduit fittings , medium grade not less 25mm dia with 4 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. ( Note :- (a) Extra length of cables/ wire required for connection to MCB shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly) (b) One metre of conduit alongwith 2x6 sqmm wire and 1x4 sqmm earth wire shall be measured as one unit length) (c) Cutting chases for concealing PVC conduit and fittings shall deem to be included in the unit rate quoted by Contractor.

M&L earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick, burried directly in to ground ( earth pit) not less than 2.25 metres deep below GL with top edge of earth plate ot less athn 1.50 m below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead wire of 4 mm dia.(7.50 m Long) by means of nuts, bolts and washers, checknuts of GI and protected by the GI pipe light grade 15 mm nominal bore (7.5 m long) for earth lead wire and watering pipe medium grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wiremesh, earthing test point etc complete including necessary earth work and excavation in any type of soil , PCC 1:3:6 type C1 earth pit and Precast cover RCC 1:2:4 type B1 50 mm thick duly reinforced with 6 Nos 8 mm dia. TMT bars ,with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I.

S&F Miniature circuit breakers SP, 6 to 32 Amps, 240 Volts , 10 KA, 'B' curve rating and to be housed in sheet metal enclosures ( distribution boxes) and making connections with suitable copper lugs complete all as specified and directed :- (Note :- Proper and suitable size cable lugs to be fixed with Miniature circuit breakers are included in unit rate of each Miniature circuit breakers of any rating).

S&F Miniature circuit breakers SP, 40 Amps, 240 Volts , 10 KA, 'B' curve rating and to be housed in sheet metal enclosures ( distribution boxes) and making connections with suitable copper lugs complete all as specified and directed :- (Note :- Proper and suitable size cable lugs to be fixed with Miniature circuit breakers are included in unit rate of each Miniature circuit breakers of any rating).

S & F Miniature circuit breakers SPN, 63 Amps, 240 Volts , 10 KA, 'C' curve rating and to be housed in sheet metal enclosures ( distribution boxes) complete all as specified and directed :- (Note :- Proper and suitable size cable lugs to be fixed with Miniature circuit breakers are included in unit rate of each Miniature circuit breakers of any rating).

S & F Miniature circuit breakers TPN, 100 Amps, 240 Volts , 10 KA, 'C' curve rating and to be housed in sheet metal enclosures ( distribution boxes) complete all as specified and directed :- (Note :- Proper and suitable size cable lugs to be fixed with Miniature circuit breakers are included in unit rate of each Miniature circuit breakers of any rating).

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items will be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. to match with the adjoining surafces complete all as specified .

M&L point wiring for one light point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in and including 20 mm dia or higher size PVC concealed conduits and PVC fittings, including Zinc Coated pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified :- Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit and boxes etc including making good disturbed surfaces to match with the existing.)

M&L (except Conduit and Conduit fittings) point wiring for one light point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in existing 20 mm dia or higher size PVC concealed conduits and PVC fittings, including Zinc Coated pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified :- Note:- The rate quoted against this item shall be deemed included for making good disturbed surfaces to match with the existing.)

M&L point wiring for one fan point controlled by one, one way switch and regulator using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in and including 20 mm dia or higher size PVC concealed conduits and PVC fittings, including Zinc Coated pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified :- Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit and boxes etc including making good disturbed surfaces to match with the existing.)

M&L (except Conduit and Conduit fittings) point wiring for one fan point controlled by one, one way switch & regulator using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in existing 20 mm dia or higher size PVC concealed conduits and PVC fittings, including Zinc Coated pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified :- Note:- The rate quoted against this item shall be deemed included for making good disturbed surfaces to match with the existing.)

M&L point wiring for bell point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in and including 20 mm dia or higher size PVC concealed conduits and PVC fittings, including Zinc Coated pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified :- Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit and boxes etc including making good disturbed surfaces to match with the existing.)

M&L (except Conduit and Conduit fittings) point wiring for one bell point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in existing 20 mm dia or higher size PVC concealed conduits and PVC fittings, including Zinc Coated pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified :- Note:- The rate quoted against this item shall be deemed included for making good disturbed surfaces to match with the existing.)

M&L point wiring for one socket outlet point on independent Board controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in and including 20 mm dia or higher size PVC concealed conduits and PVC fittings, including Zinc Coated pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified :- Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit and boxes etc including making good disturbed surfaces to match with the existing.)

M&L (except Conduit and Conduit fittings) point wiring for one socket outlet point on independent Board controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in existing 20 mm dia or higher size PVC concealed conduits and PVC fittings, including Zinc Coated pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified :- Note:- The rate quoted against this item shall be deemed included for making good disturbed surfaces to match with the existing.)

M&L point wiring for one socket outlet point on independent Board controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in and including 20 mm dia or higher size PVC concealed conduits and PVC fittings, including Zinc Coated pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 2.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified :- Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit and boxes etc including making good disturbed surfaces to match with the existing.)

M&L (except Conduit and Conduit fittings) point wiring for one socket outlet point on independent Board controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in existing 20 mm dia or higher size PVC concealed conduits and PVC fittings, including Zinc Coated pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 2.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified :- Note:- The rate quoted against this item shall be deemed included for making good disturbed surfaces to match with the existing.)

M&L point wiring for one socket outlet point on same Board with otherswitches controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in and including 20 mm dia or higher size PVC concealed conduits and PVC fittings, including Zinc Coated pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified :- Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit and boxes etc including making good disturbed surfaces to match with the existing.)

M&L (except Conduit and Conduit fittings) point wiring for one socket outlet point on same Board with others witches controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed cables in existing 20 mm dia or higher size PVC concealed conduits and PVC fittings, including Zinc Coated pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed and connecting to earth dolly and brass screws, washers etc. complete all as specified :- Note:- The rate quoted against this item shall be deemed included for making good disturbed surfaces to match with the existing.)

S&F Lamp holder, polycarbonate type with back plate complete all as specified and directed.

Supply and fixing retrofit Light Emitting Diode (LED) bulb 12 watts , 240 volts complete all as specified and directed.

S&F polycarbonate Switch piano flush type, SP, 6 Amps, one way ( ISI) marked complete all as specified.

S&F Polycarbonate socket out let 2 in 1, 5 pin , 6 Amps flush type controlled by one switch ( ISI) marked complete all as specified.

S&F Switch piano flush type, single pole , 16 Amps, one way ( ISI) marked complete all as specified.

S&F Socket outlet 2 in 1 ,6 pin, 6 & 16 amp, flush type ( ISI) marked complete all as specified.

S&F polycarbonate bell push flush type,SP, 6 Amps, one way ( ISI) marked complete all as specified.

S&F Buzzer, Ding dong, AC 230 Volts, single pole complete all as specified and directed.

Taking down of existing unserviiceable Sheet metal enclosures (DB) complete and removing and S&F epoxy powder coated distribution box, SPN, 8 ways, 240 volts, IP-43 ,metal double door for MCB , grouted flush to walls including making good disturbed surafces of wall to match the adjoining surfaces complete all as specified and directed.

Taking down of existing unserviiceable Sheet metal enclosures (DB) complete and removing and S&F epoxy powder coated distribution box, SPN, 12 ways, 240 volts, IP-43 ,metal double door for MCB , grouted flush to walls including making good disturbed surafces of wall to match the adjoining surfaces complete all as specified and directed.

Taking down of existing unserviiceable Sheet metal enclosures (DB) complete and removing and S&F epoxy powder coated distribution box, TPN, 4 ways, 415 volts, IP-43 ,metal double door for MCB/isolators , grouted flush to walls including making good disturbed surafces of wall to match the adjoining surfaces complete all as specified and directed.

S&F Sheet metal enclosure (DB), 200 Amps rated bus bar, pan assembly etc. with interconnection links, blanking plates, cable ties, identification lables, TPN, 4 ways vertical, double door, suitable for and including TP, MCCB, Adjustable thermal 80%-100% and fixed magnetic setting ,Ics= 100 Icu, 10 KA, 100 Amps, 415V as incomer and MCB as outgoing with double door and fixed in walls , flush and connecting to existing system of wiring including making good disturned surfaces complete all as specified. Note: MCBs shall be measured and paid separately)

Taking down of existing unserviiceable Sheet metal enclosures, removing and S&F SPN Sheet metal enlosures (factory made) with 10KA, 'B' curve Single pole MCB rated 20 Amps capacity with socket plug top 2 pin and earth plug complete all as specified including making niche in wall,mounted flush including making good disturbed surfaces to match with the existing complete all as specified.

M&L polycarbonate insulated body ceiling rose 6A, 50x20mm dia with three terminals, ISI maked fixed complete all as specified.

S& F ceiling fan regulator electronic modular socket type , rotary 0 to 4 steps , hum free, 100 watts , 230 Volts, ISI marked complete all as specified .

S&F Energy saving & environment friendly LED street light fitting made out of pressure die cast anodised aluminium housing 25 Watt to achieve B2 class road illumination as per IS: 1944 and as per national lighting code using each LED >1 watt and <3 watt , LED chip efficiency >= 135 Lumens/Watt, CRI>70, CCT 5000K to 6500K with LED life span at 70% of light output >50000 hours with suitable driver 120V to 280V universal type, with bult in surge protection >5KV, 50 Hz +/- 3% , pf 0.95, THD <10% with system efficiency >85 lumens/ Watt and power efficiency >=90% and overall IP 65 or better , driver and luminaire shall comply LM-79/IS:16106 and with and including street light bracket made out of 32mm dia or higher GI pipe Light grade, 1.50metre long bend to shape 120 degree angle with suitable adaptor and fixed to pole / wall/ ceiling by two Nos MS clamp made out of flat iron size 40x6mm comprising 4 Nos mild steel hexagonal head bolts of 12mm dia, 75mm long with washers duly painted with two coats of synthetic enamel paint over a coat of primer and making cpnnections with cable complete all as specified and directed by EIC.

S&F Light emitting Diode (LED) panel recess mounting 2'x2' - 36 watts, 6000K, diffuser type optics, light fitting with separate electronic driner complete including cutting holes of required size in false ceiling and making good disturbed surfaces complete all as specified.

S&F Light emitting Diode (LED) tube light fitting surface mounting decorative batten, extruded aluminium housing provided for heat dissipation with polycarbonate diffuser and integrated electronic driver AC 220-240V, 50 hz, 20 watt/22 watt, 4' long complete all as specified and directed.

KUKREJA BROTHERS

M/S A B CONSTRUCTION

R P G ELECTRONIC REGD

Shikha Enterprises

M/S JPS Electrical Engineer & Contractor

SIDDHARTH TRADERS

AIRCOM