REPAIR MAINT OF COOLING APPLIANCES, INTERNAL WIRING AND WELCOME MAINT OF OFFRS ACCN IN GRD NCC AT KUNRAGHAT UNDER GE AF GORAKHPUR

Amount

Taking down carefully point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

M&L for point wiring controlled by one 5A switch using 1.5 Sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed for following :- (a) One Light/fan point controlled by one switch

(b) One 5 Amps socket point controlled by one 5 Amps switch on same board.

(c) One 5 Amps socket point controlled by one 5 Amps switch on independent board.

(d) One bell point controlled by one 5 Amps bell push.

(e) One light point controlled by two 5 Amps two way switch.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 Sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with modular top cover and plate including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 2 to 7 :- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface.(ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

M&L for point wiring controlled by one 5A switch using 1.5 Sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including PVC casing capping all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed. (a) One Light/fan point controlled by one switch.

(b) One 5 Amps socket point controlled by one 5 Amps switch on same board.

(c) One 5 Amps socket point controlled by one 5 Amps switch on independent board.

(d) One bell point controlled by one 5 Amps bell push.

(e) One light point controlled by two 5 Amps two way switch.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including PVC casing caping with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with modular top cover and plate including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 8 to 12 :- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface.(ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

S&F switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.

S&F switch piano, flush type 5/6 amp, single pole, two way 240 volt complete all as specified and directed.

S&F socket outlet, 3/5 pin, 5/6 amps flush type complete all as specified and directed.

S&F socket outlet, two in one 3 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.

S&F switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

S&F bell push, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.

S&F ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

S&F fan regulator electronic step up type, SP 230 volt complete all as specified and as directed.

S&F lamp holder polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.

S&F Call bell ding dong, AC single pole 240 volts complete all as specified and directed.

Taking down old unserviceable light fittings conventional type from wall surface / ceiling or any position and making good the disturbed surfaces all as specified and directed.

S&F 10 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally per-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No. ENDURA LINE ARNE OBS10WLED865SPCWH or equivalent in Bajaj / CG.

S&F 20 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally per-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No. ENDURA LINE ARNE OBS20WLED865SPCWH or equivalent in Bajaj / CG.

S&F recess mounting LED luminaries of size 2'x2' white 34 watt, 230 volts for ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.Make:- Havells Cat part No. PLUTONEO2X2PLR34W LED840S or equivalent in Bajaj /CG.

S&F rechargeable 6 W LED light with frosted PC cover and pull cord complete all as specified and directed.

S&F recess mounting LED luminaries round shape 12 watt, 230 volts for ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.Make:- Havells Cat part No. INTEGRAHED LR12W LED840S or equivalent in Bajaj /CG.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F, testing energy saving, die cast aluminium housing IP 65 protection, 25 W LED flood light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed.Make:-Havells Cat No. ENDURA CITYLITEPLAT PLUS SL25WLED 757S ASYBOPC or equivalent iin Bajaj/ Philips/ CG/ WIPRO

S&F, testing energy saving, die cast aluminium housing IP 65 protection, 35 W LED flood light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:-Havells Cat No. ENDURA CITYLITEPLAT PLUSSL35WLED 757SASYBOPC or equivalent iin Bajaj/Philips/CG/ WIPRO

S&F, testing energy saving, die cast aluminium housing IP 65 protection, 70 W LED flood light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:- Havells Cat No. JETA PROFL70WLED757LT G or equivalent iin Bajaj/ Philips/CG/ WIPRO

S&F post top lantern light fitting 25W LED made in die cast aluminium housing with decorative opal acrylic diffuser and IP65 protection, fixed properly at directed location complete all as specified and directed. Make:- Havells Cat No. CORALPT25W LED757 PSYMTOPC or equivalent in Bajaj/Philips/CG/ WIPRO

Excavation in trenches in soft/loose soil n.exc 1.5 meter wide and n.exc 1.5 mtr depth and getting out for cable trench complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.

Removing surplus excavated material not exc. 50 meters and depositing where directed at a level not exc. 1.5 meter above the starting point complete all as specified and directed.

Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed.Note: Punned thickness shall be measured for the purpose of payments.

Supply and laying burnt bricks old size sub class-B laid in trenches for cable protection with length of brick perpendicular to length of cable complete all as specified and directed.

Boring of holes horizontally for laying of 40 mm dia pipe (minimum depth 1200mm from top level) under road, Pavement, hard standing complete all as specified and directed.

S&F 40mm bore GI pipe, light grade with all fittings laid in trenches, road crossing and fixed to walls, on poles etc for cable protection complete all as specified and directed.

Supply, laying and testing 6 Sqmm, 2.0 Core XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, galvanised steel strip or wire, with aluminium conductor 1100 V grade, laid in trenches/ along poles, ducts or through sleeve complete all as specified and directed Note: Earth work, sand cushioning and bricks will be measured and paid separately under relevant items.

S&F in replacement brackets made out of 40/50mm dia medium grade GI pipe 1.50 mtr long bent to shape and size fixed on location using new 2 nos 30x5mm FI clamps made to shape incl nuts, bolts & washers complete all as specified and directed.

Taking down carefully old and unserviceable sub main wiring of 2/3 runs or main-wiring of any size of aluminium conductor cable from any position including wood batten, PVC conduit, steel conduit, PVC Casing caping etc including making good disturbed surface of wall ceiling etc complete all as specified and directed.

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 2.50 Sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 1.5 Sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 2.5 sqmm conductor cable, 1 No 1.5 Sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 4.0 Sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 4 Sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 4 Sqmm conductor cable, 1 No 4 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated -unsheathed 6.0 Sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 6.0 Sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 6.0 Sqmm conductor cable, 1 No.6.0 Sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

Supply and fixing in repair 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed for service connections of 6 Sqmm size twin core flat solid conductor cable complete from pole to distribution board main controlling switch complete all as specified and as directed.

Taking down old unserviceable MCCB DBs / MCB DB / Main Switches including MCBs/ MCCBs/ Isolators, complete all as specified and as directed.Note: Any disturbed surfaces of wall will be matched properly as the existing colour surfaces.

S&F factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs complete all as specified and directed.

S&F factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs complete all as specified and directed.

S&F factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F sheet metal enclosure distribution board SPN 2 ways complete all as specified and directed.

S&F MCCB, 4 pole, 63 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F MCCB, 4 pole, 100 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F MCCB, 4 pole, 125 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F MCB, SP, 6 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SP, 40 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, TP, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, TPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F in replacement U/S and broken exhaust fan (air freshener) single phase 230/240 volt AC 300mm sweep with louvers, plastic body with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed.Make: Havells/Bajaj/CG.

S&F in replacement unsv wall mounted fan single phase 230/240 volt AC 400mm sweep, with regulator, oscillation type complete fixed properly on wall and connecting /testing as directed. Note Old unsv fan will be deposited to E/M store yard .Make: Havells/Bajaj/CG.

Repairing of light point (normal/ flameproof), fan point, socket point 5A/15A, switches sockets, fan regulator, light fixtures any type, lamp any type, MCB DB's & all electrical accessories in day to day/door to door maintenance and making it serviceable in all respect with replacement of any major part but including small length of wires (not more than 50cm) adhesive cable and other connected minor accessories by providing sufficient and skilled manpower. Work shall also include to check & removal of current leakages in Bldgs and any urgent nature of work as and when directed. The scope also include cutting of existing Bakelite sheet to accommodate new elect fittings/fixtures like switches, sockets, fan regulators etc. Note :- (a) The rate quoted by the contractor for Each Job is deemed to be included consisting of minimum 03 complaints in working hours between 0900 AM to 0500 PM in NP area by engaging one electrician and one helper. (b) The contractor or his representative will take complaint from MES complaint Register through MES job card. (c) The contractor will made separate items register with location and signature of user. (d) The contractor will maintain complete details of Job cards (Working/Off working hours) and items involved with date and user signature. (e) The ladder and T&P as required will be provided by the contractor. (f) Risk factor & security pass will be the contractor's end. (g) Material will be measured and paid separately in the relevant item here after. (h) All supply material shall be deposited by contractor in MES store yard and issued in every Job Card as per requirement. (j) The tradesmen should be available at MES area complaint cell (In MES Complex), after completing their daily Job Cards as well as during off working hours / Night / Sunday / Holiday. (K) Please note that complaint will be attended within the 3 hours after receiving complaint, failing which a panel recovery will be imposed @ Rs 500/ Complaint and recovered from contractors dues.

All as per Item No. 67 above but for attending the electrical complaints during off working hours / Night / Sunday / Holiday time for 12 hours.Note :- All as per item No 68 above but the rate quoted by the contractor for 'Each Job' is deemed to be included 01 complaint in NP area

Supply only in replacement fan regulator electronic step up type, SP 230 volt complete all as specified and as directed.

Supply only in replacement switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement modular switch single pole 1 way, 1 module, 6 Amp complete all as specified and directed.

Supply only in replacement modular switch single pole 1 way, 1 module, 16 Amp complete all as specified and directed.

Supply only in replacement modular socket out let multipurpose 6A -2/3 pin, SP 1 way 2 module complete all as specified and directed.

Supply only in replacement modular socket out let multipurpose 6A/16A-2/3 pin, SP 1 way 2 module complete all as specified and directed.

Supply only in replacement modular bell push pole 1 way, 1 module, 6 Amp complete all as specified and directed.

Supply only switch socket combination multipurpose 5 pin 5/15 Amps

Supply only switch socket combination multipurpose 5 pin 5 Amps

Supply only in replacement switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement socket outlet, 3/5 pin, 5/6 amps flush type complete all as specified and directed.

Supply only in replacement socket outlet, two in one 3 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.

Supply only in replacement bell push, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

Supply only in replacement Call bell ding dong, AC single pole 240 volts complete all as specified and directed.

Supply only in replacement lamp holder polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.

Supply only in replacement lamp LED 12 watt, 240 volts complete all as specified and directed.

Supply only tape insulation, 1100 volts grade 20mm width, 15 meters long complete all as specified and directed.

Supply only in replacement ball bearing No. 6200 to 6203 complete all as specified and directed.Make:-SKF/NRB/NBC/TATA

Supply only in replacement gun metal bush of any description and size to suit existing motor shaft complete all as specified and directed.

Supply only in replacement capacitor of capacity 2.5 MFD PVC body complete all as specified and directed. Make:- EPCOS/JYOTI/ USHA

Supply only in replacement capacitor of capacity 3.15 MFD PVC body complete all as specified and directed. Make:- EPCOS/ JYOTI/ USHA

Supply only wire flexible 23/0.0076, twin core twisted, PVC insulated copper stranded conductor complete all as specified and directed.

Taking down geysers carefully of any type and make of capacity 25 liters after disconnecting water supply and electrical connection, opening of geysers for inspection of unserviceable parts followed by servicing overhauling after replacement of unserviceable component with cleaning of heating element and inner tank by de-scaling including assembling fixing in position, making all electrical & water supply connection, making functional and testing complete all specified and directed. Note:- Components/spare part required for replacement shall be paid for separately under respective item here in after as supply only/issue only on demand.

All as per item No. 92 above but of capacity 50 liters.

Supply only heating element ISI marked 1.5 KW suitable for geyser of 25 liters, horizontal or vertical type of any make complete all as specified and directed.

Supply only heating element ISI marked 2.0 KW suitable for geyser of 25 liters, horizontal or vertical type of any make complete all as specified and directed.

Supply only heating element pin type (Triangular) 1.5 KW rating capacity 230 V, ISI marked complete all as specified and directed.

Supply only heating element pin type 2.0 KW rating capacity 230 V, ISI marked complete all as specified and directed.

Supply only thermostat minimum 300mm long ISI marked suitable for geyser of 25/50 liters, horizontal or vertical type of any make complete all as specified and directed.

Supply only power indicating lamp circular/rectangle type suitable for 25/50 liters capacity geyser complete all as specified and directed.

Supply and filling up glass wool suitable for geyser of 25/50 liters, horizontal or vertical type of any make complete all as specified and directed.

M&L for repairing leakage of inner copper tank of geyser (any make) 25/50 liters capacity by brazing including all necessary denting etc complete all as specified and directed.

Supply and fixing in replacement of inner copper cell geyser (any make) 25 liters capacity and making connections by brazing including all necessary accessories complete all as specified and directed.

Supply and fixing in replacement of inner copper cell geyser (any make) 50 liters capacity and making connections by brazing including all necessary accessories complete all as specified and directed.

Renewal of base assembly complete suitable for geyser (any make) 25 liters capacity and making connections by brazing including all necessary accessories complete all as specified and directed.

Renewal of base assembly complete suitable for geyser (any make) 50 liters capacity and making connections by brazing including all necessary accessories complete all as specified and directed.

Supply only top or bottom cover for any make of geyser of 25 Liters capacity complete all as specified and directed.

Supply only top or bottom cover for any make of geyser of 50 Liters capacity complete all as specified and directed.

S&F in replacement hot water supply CP/PVC connection pipe of size 450mm long heavy duty with check nut for 15 mm dia pipe ISI marked complete all as specified and directed.

S&F in replacement plug top of polycarbonate 3 pin, 15/16 Amp, 230 V complete all as specified and directed.

S&F in replacement plug top metallic 3 pin, 20 Amp, 230 V complete all as specified and directed.

S&F in replacement gun metal non return valve heavy duty 15mm dia complete all as specified and directed.

S&F in replacement of fusible plug chromium plated brass (ISI marked) suitable for any type of geyser complete all as specified and directed.

S&F in replacement outer shell for 25ltr capacity geyser vertical or horizontal type including top and bottom covers plate complete all as specified and as directed.

S&F in replacement outer shell for 50ltr capacity geyser vertical or horizontal type including top and bottom covers plate complete all as specified and as directed.

Supply only gasket with stud for aperture assembly of any type geyser complete all as specified and directed.

Supply only safety pressure/air lock valve suitable for geyser 25/50 Ltrs capacity complete all as specified and directed.

Disconnecting, taking down & removing carefully the existing ceiling fan, exhaust fans, wall bracket fans, air circulating fans and pedestal fans etc. of any description, any sweep and from any position/locations for repairs/servicing/numbering, dismantling & opening of the fans, checking serviceability of parts, overhauling by necessary cleaning, oiling & greasing, fixing the serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the fans, making necessary adjustment and proper alignment of blades, hanging/fixing the repaired fans in position, connecting to existing electric sources and testing at site to the entire satisfaction of the department complete all as specified and directed. Note:- (i) The replacement of defective/ nonfunctional parts shall be measured & paid separately as “Supply only” under appropriate item of Sch ‘A’ and fixing charges for new items are deemed to be included under this item. (ii) Burnt out windings replaced, shall be measured and paid for separately under appropriate item here-in-after. (iii) The rates for above items are deemed to include transportation charges from E/M store yard to workshop and vice versa.

Taking out & removing old burnt-out winding and rewinding of motor of ceiling fans 1200/1400 mm sweep of any description and rewinding of fan motor with appropriate size super enameled copper wire approx 200 gram including insulating material such as illumines paper, letherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction of the department for the following Fans:- Make of winding wire: Atlas/Finolex/ Devi Dayal

All as per item No. 118 above but rewinding of motor of exhaust fans of 225/250 mm sweep with 170 gram winding wire.

All as per item No. 118 above but rewinding of motor of exhaust fans of 300/400 mm sweep with 200 gram winding wire.

All as per item No. 118 above but rewinding of motor of air circulating fan of 400 mm sweep with 300 gram winding wire.

All as per item No. 118 above but rewinding of motor of pedestal fan of 400 mm sweep with 400 gram winding wire.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ceiling 230 V, 1200 mm sweep. BEE 5 star rated complete all as specified and directed.

Supply and fixing in replacement unseviceable exhaust fan (air freshener fan) single phase 230/240 volt Ac 250mm sweep with louvers, plasticl body and twistedcopper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed. Make Havells /Bajaj/CG. complete all as specified and directed.

Supply and fixing in replacement unseviceable exhaust fan (air freshener fan) single phase 230/240 volt Ac 250mm sweep with louvers, steel body and twistedcopper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed. Make Havells /Bajaj/CG. complete all as specified and directed.

Supply only PVC Casing capping of size 25mmx16mm complete all as specified and directed

Supply only modular type PVC enclosure with a two pin and earth plug and socket 16 Amps complete with one single pole MCB 20/25 Amps capacity complete all as specified and directed.

Supply only SS Screws of dia 6mm with long plug shaft for fixing of casing capping complete all as specified and directed

Supply only fastener bolts for fixing of geysers complete all as specified and directed

Supply only in replacement single core 1.5sqmm copper cable Heat Resistant Flame Retardant (HRFR) PVC Insulated Industrial flexible cable 1100 volts complete all as specified and directed.

Supply only in replacement single core 2.5sqmm copper cable Heat Resistant Flame Retardant (HRFR) PVC Insulated Industrial flexible cable 1100 volts complete all as specified and directed.

Supply only in replacement motor, single phase for 200/250mm Exhaust fan as per sample complete all as specified and directed.

Supply only in replacement Switch Socket combination unit with box having 20A Switch, 6A/16A Socket, 240 volts complete all as specified and directed.

M & L preparation old decorated surfaces of any description, including cornices and applying one coat of white wash on walls complete all as specified and as directed.

All as per item No. 132 here in above but on ceiling surfaces complete all as specified and as directed.

M&L for preparing of old decorated surfaces and applying one coat of cement based paint on walls complete all as specified and as directed.

Preparation of old plaster surfaces of wall including complete removal of existing treatment and applying two coats of cement base paint complete all as specified as directed.

M&L washing, rubbing down and stopping of distempered and painted surfaces of walls including cornices etc and applying one coat of oil bound distemper white or tinted with roller complete all as specified and as directed.

M&L washing, rubbing down and stopping of distempered and painted surfaces of walls including cornices etc and applying two coat of oil bound distemper white or tinted with roller complete all as specified and as directed.

All as per item No 137 here in above but one coat of oil bound distemper on ceiling surface complete all as specified and as directed.

M&L for preparation of old painted wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted steel surfaces of any description, over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed.

Taking down cement or cement lime plaster any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified as directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified as directed.

M & L for Taking down cement plaster any description on brick or concrete walls, etc including raking out joints, hacking for key scrubbing down with water etc Rendering 15mm thick in two layers of 10+5 mm in CM 1:4 mixing with pidi Proof 101 LW (+) of Dr fixit or equivalent integral water proofing admixture @200ml/bag over two coats of super latex 302 of dr fixit or equivalent in the ratio (1:4:7),(one part super latex,4part water and 7 parts of cement ) @ 1.5 kg of homogenious mixture/ Sqm in two coats and finish the surface even and smooth with out using extra cement ) for external walls complete as per specification and directed ( Pidi proof and super latex to be measured and paid separately)

M&L Rendering 5mm thick in CM 1:3 on ceiling finished even and smooth without using extra cement complete all as specified as directed.

Supply only Pidi proof 101 LW(+)complete all as specified and directed at site.

Supply only Super latex 302 complete all as specified and directed at site.

M & L preparation new plastered surfaces of any description, including cornices and applying three coats of white wash on ceiling complete all as specified and as directed.

Preparation of new plaster surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified as directed.

Preparation of new plaster surfaces of wall and applying two coats of cement base paint over a cement slurry of white cement complete all as specified as directed.

M&L for providing and applying minimum 1mm thick wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed at site.

S&F in repair 20 mm dia gun - metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed at site.

S&F in repair stop valves 15 mm bore fancy type, chromium plated, with long shank and cup, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed. Make- Essco or equivalent

Supply and fix in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed. Make- Essco or equivalent

Supply and fix in repairs 15 mm bore Bib tap standard of PTMT fancy type any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-105gms complete all as specified and directed at site.

S & F in Repair Two way Angle cock with wall flange complete all as specified and directed at site.

S & F in repairs Health faucet with 1 meter long easy flex tube in chrome finish and wall hook with NRV ( Back flow preventer) complete all as specified and directed at site. (JAQUAR Cat Part No-ALD-CHR-579)

S&F in repairs 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed. Make-Essco or equivalent

S&F in repairs 15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed at site..(Minimum weight15mm-110gms).

S&F in repair brass chromium plated concealed valve of 15 mm bore complete all as specified and directed.

S&F in repairs angle valves, 15 mm dia cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed all as specified and directed. Make- Essco or equivalent.

S&F in repairs angle valves, 15 mm of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete all as specified and directed at site.

S&F in repairs push button soap dispensers Make-Jaqure (SDR-DJ0010F)

S&F in repair vitreous china ware wash hand basin 550mm x 400 mm size, white, flat back or angle including removing the existing one complete and re-fixing with new bracket and making good all connections. Make- Cera/Hindware/Parreware or equivalent.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including P or S trap, seat cover, including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floor complete all as specified as directed.

S&F in repair vitreous chaina squatting pan Orissa pattern size 580X 440mm white with integral foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-syphonage pipe etc complete fixed in repair complete all as specified as directed.

M&L in repair white or coloured plastic seat cover solid confirming to ISI complete and taking down old all as specified and directed. Make-Cera/Hindware or equivalent

S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed. Make-Cera/Hindware or equivalent

S&F in repairs 15 mm bore PVC connection 450cm long with brass nuts and washers on both ends all as in repairs specified and directed.

Ditto here in above but 600mm long complete all as specified and directed at site.

S&F in repair brass CP shower rose with arms 75 mm size fixed to pipe all as in repairs specified and directed.

S & F in repair for towel rail 600mm long Make Jaquar Cat Part ACN-1111SM

S & F in Repair Over head shower 120x120 mm square shape single flow (face plate stainless steel & ABC body in chrome finish) with rubit cleaning system. (Jaquar OHS-CHR-1667)

S & F in Repair hand shower dia 100 mm round shape multi flow (ABC Body chrome plated with gray face plate) with rub it cleaning system. (Jaquar SHS-CHR-1939)

S&F in repairs stainless steel kitchen sink with draining board made of stainless steel 1mm thick, coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm X 460 mm and bowl size 410X330X160 mm complete all as directed . Make- Nirali or equivalent.

S&F in repairs brass CP wash basin mixer (Two in way) for mixing hot and cold water screwed down for iron pipe suitable for 15 mm dia bore of pipe all as specified and directed. Make- Essco or equivalent.

S & F in repair for single lever basin mixer of Jaquar Cat Part No VGP-CHR-81011B

S & F in Repair Wall mixer 3-in- system with provn for both hand shower and Over head shower complete with 115 mm long bend pipe, connection legs and flange ( with out hand and overhead shower).( Jaquar CON-CHR-281KN )

S&F in repair PVC toilet cup board cabinet, with shutters having mirror on shutter of size 47cm x 35cm x 15cm Make - Prayag /Shakti or equivalent complete all as specified and directed at site.

S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long all as specified.

S & F in repair Corner Glass Shelf (with Bracket) of make Jaquar cat part No ACN-1173

S&F in repairs Jet Faucet 15mm dia reinforced pipe fitted to GI pipe Make -jaquar or equivalent.

S & F in repair for shop dish, Make Jaquar cat Part No CAN-1131N

S&F in repair Toilet paper holder MSCP complete all as spd.(Make- Jaquare) Cat No- AKB - 35751 or equivalent.

S&F in repair CP Grating 125 mm size complete all as specified as directed.

S&F in repair PTMT Grating 125 mm size complete all as specified as directed.

S&F in repair curtain rod/rail stainless steel fancy type 20/25 mm dia including bracket and with two glob with necessary fitting etc measured end to end of globe as requirement at site complete al as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or re-fixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, all as specified & directed .

S&F in repair for 110mm bore PVC (SWR) bends provided with access door all as specified & directed .

S&F in repair for 110mm bore PVC (SWR) bend provided with oval access door all as specified & directed .

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M&L in repair 75mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed at site.

S&F in repair 75mm PVC (SWR) bends any radius complete all as specified and directed at site.

PVC in repair waste pipe 40mm dia for sink ISI marked complete all as specified and directed at site.

PVC in repair waste pipe 32mm dia for wash basin ISI marked complete all as specified and directed at site.

Dismantling stone slab & tiles of any description complete all specified and directed

S&F 20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win door cills, cooking plat forms and like 20 mm cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Rounding to edge of stone slab one edge, such on in stop, cooking platform, and other similar situation complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed at site.

M&L Non skid joint less colour Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement mortar 1:6 bedding complete all as specified and directed at site.

Ditto but as in skirting over 10 mm thick cement mortar in 1:4 complete all as specified and directed at site.

S&F joint free non skid coloured ceramic tiles 7 to 8mm thick(square / rectangular ) area of each tile n. exceeding 0.11 Sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc complete.

S&F Glazed ceramic coloured tiles 300x450x7 mm thick in skirting dados risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 15mm thick cement plaster in cm 1:4 complete all as specified as directed..

M&L Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement mortar 1:6 bedding complete all as specified and directed at site.

Ditto here in above but in skirting over backing coat of 10 mm thick cement mortar 1:4. complete all as specified and directed.

S&F in repair two (double) legged floor door stopper of aluminium body and tongues with hard drawer steel spring fixed in floor of 150mm complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or stainless steel wire staples. Complete all as specified and directed.

S & F in repair squre shaped single flow maze over head shower (chromium finish) with rubit claening system, size-240mm x 240 mm Make Jaquar(Code-OHS-CHR-1629) or equivalent in Marc/ L&K.

Supply and fix in repairs mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and directed at site.

M/s Pandey Trading Company

A K CONSTRUCTIONS

Hindustan Power Corporation

M/S B.P. CONSTRUCTION