Construction of Community Hall Near Jawala Mata Mandir Pyt. Patnazi, Tehsil Bounjwah, Bunjwah, Kishtwar

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil :

Providing and laying cement concrete 1:4:8 (1 cement: 4coarse sand : 8 stone aggregate)

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Reinforced cement concrete work in walls including attached pilasters, butresses, plinth and string courses,fillets,columns,pillars,abutments ,posts and stuts etc upto plinth level 1:1.5:3 mix with 20 mm nominal stone aggregate upto plinth level

Reinforcement for R.C.C work including straightening cutting bending placing in position all complete etc T.M.T bars

Centering and shuttering including strutting ,propping etc and removal of formwork (a) Foundations, footings, bases for column

(b) Columns, piers, abutments, pillars, posts and struts

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1: 6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 mix.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.

15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1 : 4 ( 1 cement : 4 fine sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. 9.48.1 Fixed to steel windows by welding

Providing and fixing panelled or panelled and glazed shutters for doors and windows ,celestory windows including ISI marked M.S pressed butt hinges bright finished of reg. Size with neccessary screws excluding panelling which will be paid seperately all complete 35 mm thick shutters in 2nd class K/Wood

Providing and fixing panelling or paneeling and glazing in panelled or panelled and glazed doors and windows etc ( area of opening for panel inserts excluding portion inside grooves or rebates to be measured ) panelling for panelled or panelled and glazed shutters commercial ply on both sides

Proving and fixinng glazed shutters for doors and windows and celestory windows using kg/sqm (4 mm thick) float glass panes incuding ISI marked M.S pressed butt hinges bright finished of required size with neccessary screws 30 mm th 2nd class kwood

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc

Providing colour corrugated ribbed sheets roofing including vertical/curved surface fixed with polymer coated J or L hooks ,bolts and nuts 8 mm dia with bitumen and G.I limpet washers or with G.I limpet wshers filled with white lead ncluding a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch 0.50 mm thick with zinc coating not less than 275 gms/sqm

Providing ridges or hips of width 60 cm overall width in plain G.S sheets fixed with polymer coated J or L hooks bolts and nuts 8 mm dia G.I limpet and bitumen washers complete .50 mm thick with zinc coating not less than 275 gms /sqm Coloured

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). 11.54.2 Size of tile 600x600 mm

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo / Fir wood

Providing and fixing hard board sheet ceiling of approved quality with necessary nails etc. complete (frame work to be paid for separately) 12.49.1 Standard Quality board 8 mm

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Painting with synthetic enamel Paint of approve brand and manufacturer two or more coats on new work over and including a priming coat

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Finishing walls with water proofing cement paint of required shade.New work (two or more coats applied @ 3.84 kgs /sqm

Providing and fixing aluminium handles ISI marked anodised transparent or dyed to reqd colour and shade with neccesary screws etc complete 125 mm size

Providing and fixing aluminium handles ISI marked anodised transparent or dyed to reqd colour and shade with neccesary screws etc complete 100 mm size

Providing and fixing aluminium sliding door bolts ISI marked anodised transparent or dyed to reqd shade and colour

Providing and fixing aluminium tower bolts ISI marked anodised transparent or dyed to reqd colour and shade with neccesary screws

Providing and fixing bright finished brass door latch with necessary screws etc. complete. : 9.76.2 250x16x5 mm

Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc.

Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete.

Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. 125x64x1.90 mm

Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. 125x64x1.90 mm

Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall 25mm OD(SDR-7.4)

40mm OD(SDR-7.4)

50 mm OD(SDR-7.4)

External work including trenching, refilling etc. Main supply line.a) PPR Union 25mm

b) PPR Union 40mm

c) PPR Adapter 40mm

d) PPR Adapter 25mm

External work including trenching, refilling etc. Main supply line.

Providing and fixing ball valve PPR of approved quality complete

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer incharge.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.25mm nominal bore, 152mm long, weighing not less than 440gms.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete P/F PVC waste 32mm

P/F bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 18.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing 100 mm sand cast iron grating for gully trap

Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 19.65.1 15 mm nominal bore with 30 cm length.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250mm

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing on wall 35 LTRS Electric Geyser with ABS Body.

Cost of 1.5 sq mm single core copper wire (Red & black) polycape, havels or equivalent make (Including all leads, lifts and carriages etc.)

Adhesive tape (Including all leads, lifts and carriages etc.)

1 way switch 16 Amp (Including all leads, lifts and carriages etc.)

3 pin power socket 16 Amp,shuttered (Including all leads, lifts and carriages etc.)

Cost steel wire grip (Including all leads, lifts and carriages etc.)

Cost of 1.0sqmm wire for invertor points. (Including all leads, lifts and carriages etc.)

Cost of 1200mm ceilling fan reputed make (Including all leads, lifts and carriages etc.)

Cost of fan regulator (Including all leads, lifts and carriages etc.)

Cost of 6amp 1 way switch reputed make (Including all leads, lifts and carriages etc.)

Cost of 6amp 3way socket. (Including all leads, lifts and carriages etc.)

Cost of 2.5sqmm wire. (Including all leads, lifts and carriages etc.)

Cost of tube light 36watt led. (Including all leads, lifts and carriages etc.)

Cost of 6amp mcb single pole. (Including all leads, lifts and carriages etc.)

Cost of 16sqmm cable alluminium 2 core service line. (Including all leads, lifts and carriages etc.)

Cost of pvc cassing N capping batten (Including all leads, lifts and carriages etc.)

Cost of junction box modular different size (Including all leads, lifts and carriages etc.)

Cost of distribution panel box. (Including all leads, lifts and carriages etc.)

Supply of 63amp MCCB (Including all leads, lifts and carriages etc.)

Cost of earth wire1.5sqmm.. (Including all leads, lifts and carriages etc.)

Cost of Exuast Fan 12 inch dia with lovers. (Including all leads, lifts and carriages etc.)

Carriage of stone at an average distance of 1.0 km by AT

Carriage of Bajri at an average distance of 10 km by Mechnical Transport &1.5 Km by AT

Carriage of Sand from an average distance of 40 Km by Mechnical Transport & 1.5 km by AT

Carriage of Brick at an average distance of 230 Km by MT & 1.50 km AT

Add C.I.B