Loading
Loading…
Loading…
Tender Value
₹2.5 Cr
EMD Value
₹2.7 L
Closing Date
27 Mar 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
WORKS
14 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.
Defination of Similar Work :- Any signal interlocking works involving EI or RRI or PI or IBS or IBH or LC Gate or Yard modification or UFSBI or Track circuit (AFTC or DC TC) or Axle Counter (SSDAC or MSDAC or HA-SSDAC) or Automatic signaling.
7 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
TENDER FORM (First Sheet) Annexure-I
ANNEXURE-V
ANNEXURE V-A
Annexure-VIB
Audited Balance Sheets duly certified by the Charted Accountant along with Annexure VI-B
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
S&T work in connection with provision of 12 nos of passenger lifts, 6 nos passenger escalators under ABSS and provision of FOB at VRI junction.
T-SG-36-I-42-2025-2026
T-SG-36-I-42-2025-2026
Open
Works - General
9 Months
Chennai, Tamil Nadu
₹0
₹2.7 L
27 Mar 2026
3 Mar 2026
13 Mar 2026
38 items across 1 schedule · ₹1,81,46,282.28 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply o f earth electrodes (G I) a s p e r Drg no SG/CN/02/13 | Numbers | 26.00 | 1,618.75 | 42,087.5 |
| 2 | Provision of earth electrodes as per drawing No.SG/CN/02/13 and earthing of metallic sheath and armour of all cables in all apparatus cases, relay room, equipment room, SM's room for block and control, and earthing of all equipments in apparatus cases, power room, relay rack, cable termination rack, control panel, signals, lever frames with MS flat 35mm X 6mm/19c cable (MS flat for closer by areas and MS flat/19c cable combination for farther areas) as per the instructions of Railway representative at site. The work includes painting of earth resistance value on the earth pit. (Supply of 19C cable is not covered in the scope of this schedule). [MS flat for earthing 35mm X 6mm, cement, GI earth electrodes, common salt, charcoal, country bricks, M sand, soldering materials and all other miscellaneous materials required for the work shall be supplied by the Contractor]. | Numbers | 26.00 | 1,707.55 | 44,396.3 |
| 3 | Supply o f 2 4 Core x 1 . 5 Sq.mm PVC insulated Armoured, unscreened underground Railway Signalling copper cable as per IRS: S-63/2014 REV.4 | Metre | 15100.00 | 388.15 | 58,61,065 |
| 4 | S u p p l y o f 1 2 C x 1 . 5 S Q M M P V C insulated Armoured, unscreened underground Railway Signalling copper cable a s p e r I R S : S-63/2014 REV.4 | Metre | 13400.00 | 215.92 | 28,93,328 |
| 5 | "Supply of 2x25 sqmm PVC insulated Armoured, unscreened underground Railway Signalling Aluminium cable as per IRS: S- 63/2014 REV.4" | Metre | 2250.00 | 93.01 | 2,09,272.5 |
| 6 | Supply of Underground jelly filled 6 QUAD, 0.9MM Dia as per spec IRS:TC 30-05 with amd 5 or latest | Metre | 1000.00 | 301.05 | 3,01,050 |
| 7 | Supply o f 2 4 Fibre armoured O F C cable as per RDSO Specification RDSO/SPN/TC/ 110/2020 Rev. 0 or latest | Metre | 2000.00 | 95.23 | 1,90,460 |
| 8 | S u p p l y o f P o l y t h e n e I n s u l a t e d Polythene Sheathed armoured Jelly Filled Telephone Cable with Poly-AL Moisture Barrier, 20 Pairs, 0.63 MM Conductor Diameter a s per RDSO Specification No. IRS:TC-41/97 with amendment 1 or latest | Metre | 5000.00 | 258.2 | 12,91,000 |
| 9 | Supply of UTP Cable /CAT6/6A cable ETL or UL or CE3P certified panduit or Systimax or R&M or AMP or Molex or Krone Or D-LinkMakes | Metre | 915.00 | 34.73 | 31,777.95 |
| 10 | S u p p l y a n d provision o f n o r m a l j o i n t using T h e r m o s h r i n k jointing k i t ( R D S O s p e c s No TC/77/2012 ( Rev.3) with amendment No.1&2 or latest.& jointing kit to be inspected by RDSO) for 4/6 quad cable normal joint. The work includes excavation of joint pit of size 1mX1.5mX1.5m and closing the same after completion o f cable joint a s per t h e instruction o f Railway representative at site. | Numbers | 4.00 | 4,628.91 | 18,515.64 |
| 11 | Supply of RCC cable markers (Supply of RCC cable markers as per drawing No.CSTE/CN/OFC/1. The lettering on the cable marker shall be "SIG" / "TELE" / "OFC" as per the instructions o f Railway representative at site.) as per drawing enclosed | Numbers | 122.00 | 262.65 | 32,043.3 |
| 12 | Laying of STP/OFC/Power Cable/ switch board (10 pair/ 20 pair/50 pair) Cables in 1" PVC conduit/case c a p i n g a n d c l a m p i n g on the wall/Roof tops/ Shelters w ith suitable clamping a n d h o s e t o b e provided where ever bends/ curves ( P V C conduit/ Case capping and other accessories to be supplied by the contractor) | Metre | 2500.00 | 37.3 | 93,250 |
| 13 | Excavation of cable trench in all kinds of soil except hard rocky areas including clearing of roots of trees, rocks, bushes etc. to a depth of 1.0 Mtrs and to a width of 0.3 Mtrs. (Laying of cables is not included in this schedule) | Metre | 2250.00 | 64.1 | 1,44,225 |
| 14 | Removing/breaking of existing RCC slabs on the Passenger Platform, trenching to a depth of 0.6m to accommodate the additional cables, replacing the slabs removed after the cables are laid and replastering with cement mortar, refilling the trench by ramming and consolidating i t a s per t h e instructions of Railway Representatives at site. (Laying of cables is not included in this schedule). | Metre | 4000.00 | 314.41 | 12,57,640 |
| 15 | Excavation of trench to a depth of 1 Mtr. for track crossing of cables, refilling of trench by ramming a n d consolidating i t a s p e r the instructions of Railway representative at site after l a y i n g of DWC/RCC pipes. During excavation o f trench, it has t o b e ensured that the excavated soil does not mix with the ballast available. T h e depth of 1 m trench shall b e from the bottom o f sleepers for track crossings. Laying o f cables a n d DWC pipes is not included in this schedule. (Supply of DWC/RCC pipes with couplers/collars is not included in this schedule). | Metre | 186.00 | 385.45 | 71,693.7 |
| 16 | Provision of GI pipes (50/100mm dia) for cable laying with offset at both ends and with couplings over RCC bridges, drainage, culverts, and girder bridges. For RCC bridges, drainage, and culverts, the pipes shall be mounted on concrete masonry supports of size 300mm x 300mm x 300mm at an interval of 2 meters. For girder bridges, the pipes shall be fixed on suitable MS clamps at an interval of 2 meters. The ends of the pipes shall be closed with brick masonry abutments to ensure that no cable is exposed. The work shall be carried out as per the instructions of the Railway representative at the site.(Supply of GI pipes with couplings and laying of cables is not included in this schedule).Stone jelly (20/25mm size), bricks, sand, cement, MS angles, flats, bolts, nuts for manufacturing and fixing clamps, bricks, M sand, cement, and other miscellaneous materials for the work shall be supplied by the contractor. | Metre | 48.00 | 208.54 | 10,009.92 |
| 17 | L a y i n g o f signaling/power/ telecommunication c a b l e s a s p e r c a b l e plan in cable trenches, masonry ducts, RCC Pipes, DWC pipes, GI Pipes etc.(Supply o f c a b l e s i s n o t included i n this schedule). | Metre | 34800.00 | 18.18 | 6,32,664 |
| 18 | Placing of one row of country bricks of size approximately 220mm x 100mm x 60mm breadth wise horizontally above the cables in 0.3m width trench.[Country bricks of size 220mm x 100mm x60 mm (approximately) shall be supplied by the Contractor]. | Metre | 2000.00 | 62.99 | 1,25,980 |
| 19 | "Refilling of cable trench 1m depth by 0.3m width throughout, with earth after laying of cables, and consolidating t h e t r e n c h by ramming and levelling." | Metre | 2250.00 | 15.4 | 34,650 |
| 20 | "Digging of pit to a depth of 800mm of size 300mmX300mm, casting o f concrete foundation o f size 300mmX300mmX300mm and Placing of RCC cable markers on top of the foundation and refilling the pit and consolidating i t b y ramming. The cable markers shall be provided at an interval of 20 Mtrs. within station limits a n d 5 0 Mtrs. outside station limits throughout the cable route, diversions and also at every track/road crossing." | Numbers | 122.00 | 123.35 | 15,048.7 |
| 21 | B l o w i n g / D r a w i n g o f O F C cable/Power cable/Signalling cable inside permanently solid lubricated HDPE Pipe already laid. This work includes necessary duc t integrity test for solid lubricated H D P E p i p e . ( This includes Transportation o f materials from nominated stores to site) | Metre | 5100.00 | 23.43 | 1,19,493 |
| 22 | Supply of Handheld True RMS Multi Meter, as per Technical specification | Numbers | 5.00 | 23,192.34 | 1,15,961.7 |
| 23 | Supply of Handheld True RMS clamp Meter, as per Technical specification | Numbers | 7.00 | 33,510.29 | 2,34,572.03 |
| 24 | Supply of Portable Cable Fault Locator as per Technical specification | Numbers | 4.00 | 1,86,694.53 | 7,46,778.12 |
| 25 | Supply of Digital Earth clamp Tester as per Technical specification | Numbers | 4.00 | 71,129.79 | 2,84,519.16 |
| 26 | Supply of Transmission measuring set (TMS) with accessories as per IRS Spec No. IRS:TC 43-87 or latest, as per Technical specification | Numbers | 10.00 | 57,699.4 | 5,76,994 |
| 27 | Supply o f Laser source a n d Power meter with accessories as per Technical specification | Numbers | 1.00 | 40,710 | 40,710 |
| 28 | S u p p l y o f D o u b l e w a l l e d corrugated p i p e - 1 0 3 . 5 m m i n n e r d i a & 1 2 0 m m o u t e r dia conforming to specification No. IS 14930(Part 2): 2001 with one coupler for every 6m of pipe as per Technical specification | Metre | 186.00 | 365.19 | 67,925.34 |
| 29 | Supply of GI pipes - 50mm dia -3.65mm thick as per Technical specification | Metre | 48.00 | 457.88 | 21,978.24 |
| 30 | Supply of High-Density Polyethylene Pipes (HDPE) of 110 mm Outer Dia, 10 mm Wall Thickness, along with one coupler for every 6 Meters as per specification N o . I S 4984: 2016 w i t h latest amendments and Material Grade:PE 80 | Metre | 600.00 | 853.55 | 5,12,130 |
| 31 | Supply o f HDPE Pipe 4 0 m m (outer dia)/33 mm (inner dia) with couplers | Metre | 1000.00 | 60.93 | 60,930 |
| 32 | Supply a n d Installation o f Wall/Rack mountable 2 4 Fibre management system (FMS) conforming to RDSO/SPN/TC- 37/2000(rev-3 amdt-1 o r latest similar to COMMSCOPE make o r better, suitable for splicing and front patching 24F cable with all accessories and terminating the optical fibre cable with splicing and front patching in FMS in the Location Box. This includes Supply and Provision of 4 nos of Patch cords of required length (All other materials required for splicing are to be supplied by contractor ) | Numbers | 2.00 | 18,686.74 | 37,373.48 |
| 33 | Supply of PBT terminals 25mm/ 60mm centre and PBT Fuse blocks with necessary inspection as per specification/ drawing/ description enclosed in this document. a)Supply of PBT terminals 25mm centre. | Numbers | 5700.00 | 61.44 | 3,50,208 |
| 34 | Supply of PBT terminals 25mm/ 60mm centre and PBT Fuse blocks with necessary inspection as per specification/ drawing/ description enclosed in this document. b)Supply of PBT terminals 60mm centre. | Numbers | 1100.00 | 93.02 | 1,02,322 |
| 35 | Excavation o f p i t , casting concrete foundation a n d erection o f apparatus case full size a s per Drg. No.SG/CN/02/6 and fixing of 2 Nos. of 'E' type locks, one for the front door and another for the back door, fixing of one hard wood shelf plank 37mm thick and painting the apparatus case inside and outside with one coat of red-oxide and two coats of aluminium paints.(Supply of apparatus case is not included in this schedule). [Foundation bolts & nuts, 'E' type locks, cement, M sand, stone jelly o f size 20/25 mm, hardwood plank of 37mm thick, paints, varnish, fixing bolts & n u t s a n d a l l other miscellaneous materials required f o r thework shall be supplied by the Contractor.] | Numbers | 26.00 | 11,333.1 | 2,94,660.6 |
| 36 | Termination o f n e w main/tail c a b l e s o n the existing terminals/ fuse blocks in apparatus cases/ battery boxes/ CT boxes/ cable termination r a c k s a s p e r approved circuit diagram. The t e r m i n a l p a r t i c u l a r s a r e to be repainted /corrected o n t h e d o o r s of apparatus cases/ battery boxes/ cable termination boxes and FTOT index board as instructed by Railway representative at site. This work includes closing the opening created for entry of new cables in the apparatus cases w ith masonry brick work and sealing the bottom of the apparatus cases/ cable termination racks w ith cable compound.[Paints, wire PVC 3/0.75mm and 16/0.2mm copper, sealing compound, bricks, cement, M sand and all other required miscellaneous materials shall b e supplied b y the contractor].(Per Unit = Per Terminal block) | Per Unit | 1150.00 | 73.59 | 84,628.5 |
| 37 | Termination o f main, tail, Signaling and power c a b l e s a n d internal w i r i n g on terminal/ fuse blocks in new apparatus cases, cable termination b o x e s a n d i n gate Lodges excluding cable termination rack at relay room. The work includes fixing of all new cables by teakwood clamp on teakwood base plank, fixing of Phynolic synthetic industrial fibre base fine weave cotton fibre board 6mm thick for terminal board to suit each apparatus case, varnishing all teakwood items, fixing o f terminals/ fuse blocks o n t h e terminal board, drilling of necessary holes, termination of cables, wiring, identification o f c a b l e s using aluminium tags with letters punched neatly, as p e r approved circuit diagram a n d cable plan, painting of particulars on sleeves andalso on the inner side of the doors of apparatus cases. After terminations are "over, t h e s i d e openings of apparatus case foundation shall b e closed with brick work, cement plastered, the inter-space filled with M sand up to base level and the bottom surface shall b e sealed with sealing compound. (Supply of PBT terminals and Fuse blocks is not covered i n t h i s schedule)." a)Termination on 25/60mm P B T terminals (new location)(Phynolic sheet)(Per Unit = Per Terminal block) | Per Unit | 6790.00 | 172.14 | 11,68,830.6 |
| 38 | Provision of HDPE Pipe of dia 40/33 mm | Metre | 1000.00 | 26.11 | 26,110 |
| Schedule total | ₹1,81,46,282.28 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
LetterofCreditRBLr_1.pdf
ATTACHMENT
ProcedureforundertakingdiggingworkinvicinityofSignalingElectricalandTelecomcables.pdf
ATTACHMENT
NITCPROIADSNFOB_1.pdf
ATTACHMENT
EscalatorLIFTTD-03-03-2026_2.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .