Drip Irrigation work

Amount

Lot No. 1- Bilaspur

Supply, Installation, Testing, Commissioning of TURBO CLEAN FILTER ELECTRICAL 50M3/HR including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of Sand filter DIS/SIS JCM 30M3-M 65MM SI WI E M including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of "2" inch Ventury and manifold including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of, Laying & Jointing of full lenghts of HDPE Pipes of specified grade as per IS:4984-1995 and specifications, with testing of pipe line including supply of jointing materials. For the following size

110 mm dia & 10 Kg/Cm^2 pressure

110 mm dia & 6 Kg/Cm^2 pressure

90 mm dia & 10 Kg/Cm^2 pressure

90 mm dia & 6 Kg/Cm^2 pressure

75 mm dia & 10 Kg/Cm^2 pressure

75 mm dia & 6 Kg/Cm^2 pressure

63 mm dia & 10 Kg/Cm^2 pressure

63 mm dia & 6 Kg/Cm^2 pressure

Supply, Installation, Testing, Commissioning of, Laying & Jointing of full lenghts of PE Pipes of specified grade as per relevant IS code and specifications of tender document, with testing of pipe line including supply of jointing materials. For the following size

75 mm dia & 4 Kg/Cm^2 pressure

63 mm dia & 4 Kg/Cm^2 pressure

50 mm dia & 4 Kg/Cm^2 pressure

40 mm dia & 4 Kg/Cm^2 pressure

16 mm dia & 4 Kg/Cm^2 pressure

Supply, Installation, Testing, Commissioning of dripper 4 LPH PC (Pressure Compensating) made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 63 mm dia Ball valve made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 75 mm dia Pressure Relief valve made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 63 mm dia Pressure Relief valve made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 75 mm dia Non Return valve of made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of Air release valve of suitable size (25/40 mm) as approved including supply of jointing materials.

Supply, Installation, Testing, Commissioning of Butterfly valve 75mm made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of THREE WAY COCK FR Flush Valve 50 mm including supply of jointing materials.

Supply, Installation, Testing, Commissioning of THREE WAY COCK FR Brass Pressure Guage including supply of jointing materials.

Supply, Installation, Testing, Commissioning of BYPASS TEE FOR HEADER 75MM made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of solenoid valve including supply of jointing materials, other accessories complete.

Design, Supply, Installation, Testing and Commissioning of duly wired Controller, power supply and 7” touch screen with IP65 Controller Panel for controlling upto 12 Solenoid Valves. The cost should include all related wiring, fixtures and appurtenances as required for the commissioning of the system. Nothing extra shall be paid for the satisfactory commissioning of the system.

10” Valve chamber of rugged Glass reinforced engineering with plastic lid and strong, impact resistant and robust body. The lid should be of non-slippery design. The lid should be of green colour to match the surrounding green cover. The valve chamber should have a latch arrangement with optional screwing or locking facility. The dimensions of the chamber shall be - Height 250mm, lid diameter 274mm, Bottom diameter 347 mm. The material of construction shall be - Lid PP glass reinforced, Body - Polypropylene

Storage Cum Fertigation Room / Pump Room

Construction of Storage Cum Fertigation Room / Pump Room of various Size as per drawing & specification complete in all respect. (civil, electrical & furniture)

Room Size 8 x4.5x3.0

Room Size 6 x4x3.0

Room Size 4.7 x3.6x3.0

Solar PUMP

Supply, Installation, Testing & Commissioning of Solar pump motor with solar panel and pump motor with complete Integration Solar Panel (standard MMS) supply and installation on ground or roof with structural steel frame and concrete foundation. Testing, Integration and commissioning with pumping motor. Pump Motor is set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor, working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB, Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal (above 30 kW)/ Gland packing (PTFE), Base Frame: MS. Starter Kit - with input of both AC (single and three phase) and DC supply from Solar Panel along with all accessories and wiring.

3 HP Solar

5 HP Solar

7.5 HP Solar

10 HP Solar

Electrical PUMP

Supply, Installation, Testing & Commissioning of pump motor Set. Pump Motor is set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor, working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB, Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal (above 30 kW)/ Gland packing (PTFE), Base Frame: MS. Starter Kit - with input of both AC (single and three phase) and DC along with all accessories and wiring.

5 HP Electrical

7.5 HP Electrical

10 HP Electrical

Modular Tank

Supply, Instalation, Testing & Commissioning of Modular Water Storage Tank made up prefabricated steel along with Foundation as per specification of following capacities:

0.5 Lakh Litre

1.0 Lakh Litre

1.5 Lakh Litre

2.0 Lakh Litre

2.5 Lakh Litre

Construction of PCC Platform for placement of Sand Filte, Ventury Etc as per drawing & specification complete in all respect

Provisional Sum for Electric Power Connection (For 25 connection (16- 3 Phase and 9- 1 Phase) (Bidder should fill Rs. 40,25,362)

Description of Work / Item(s)

Amount

Lot No. 2- Hamirpur

Supply, Installation, Testing, Commissioning of TURBO CLEAN FILTER ELECTRICAL 50M3/HR including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of Sand filter DIS/SIS JCM 30M3-M 65MM SI WI E M including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of "2" inch Ventury and manifold including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of, Laying & Jointing of full lenghts of HDPE Pipes of specified grade as per IS:4984-1995 and specifications, with testing of pipe line including supply of jointing materials. For the following size

110 mm dia & 6 Kg/Cm^2 pressure

90 mm dia & 10 Kg/Cm^2 pressure

90 mm dia & 6 Kg/Cm^2 pressure

75 mm dia & 10 Kg/Cm^2 pressure

75 mm dia & 6 Kg/Cm^2 pressure

63 mm dia & 10 Kg/Cm^2 pressure

63 mm dia & 6 Kg/Cm^2 pressure

Supply, Installation, Testing, Commissioning of, Laying & Jointing of full lenghts of PE Pipes of specified grade as per relevant IS code and specifications of tender document, with testing of pipe line including supply of jointing materials. For the following size

75 mm dia & 4 Kg/Cm^2 pressure

63 mm dia & 4 Kg/Cm^2 pressure

50 mm dia & 4 Kg/Cm^2 pressure

40 mm dia & 4 Kg/Cm^2 pressure

16 mm dia & 4 Kg/Cm^2 pressure

Supply, Installation, Testing, Commissioning of dripper 4 LPH PC (Pressure Compensating) made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 63 mm dia Ball valve made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 75 mm dia Pressure Relief valve made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 63 mm dia Pressure Relief valve made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 75 mm dia Non Return valve of made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of Air release valve of suitable size (25/40 mm) as approved including supply of jointing materials.

Supply, Installation, Testing, Commissioning of Butterfly valve 75 mm made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of THREE WAY COCK FR Flush Valve 50 mm including supply of jointing materials.

Supply, Installation, Testing, Commissioning of THREE WAY COCK FR Brass Pressure Guage including supply of jointing materials.

Supply, Installation, Testing, Commissioning of BYPASS TEE FOR HEADER 75MM made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of solenoid valve including supply of jointing materials, other accessories complete.

Design, Supply, Installation, Testing and Commissioning of duly wired Controller, power supply and 7” touch screen with IP65 Controller Panel for controlling upto 12 Solenoid Valves. The cost should include all related wiring, fixtures and appurtenances as required for the commissioning of the system. Nothing extra shall be paid for the satisfactory commissioning of the system.

10” Valve chamber of rugged Glass reinforced engineering with plastic lid and strong, impact resistant and robust body. The lid should be of non-slippery design. The lid should be of green colour to match the surrounding green cover. The valve chamber should have a latch arrangement with optional screwing or locking facility. The dimensions of the chamber shall be - Height 250mm, lid diameter 274mm, Bottom diameter 347 mm. The material of construction shall be - Lid PP glass reinforced, Body - Polypropylene

Storage Cum Fertigation Room / Pump Room

Construction of Storage Cum Fertigation Room / Pump Room of various Size as per drawing & specification complete in all respect. (civil, electrical & furniture)

Room Size 8 x4.5x3.0

Room Size 6 x4x3.0

Room Size 4.7 x3.6x3.0

Solar PUMP

Supply, Installation, Testing & Commissioning of Solar pump motor with solar panel and pump motor with complete Integration Solar Panel (standard MMS) supply and installation on ground or roof with structural steel frame and concrete foundation. Testing, Integration and commissioning with pumping motor. Pump Motor is set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor, working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB, Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal (above 30 kW)/ Gland packing (PTFE), Base Frame: MS. Starter Kit - with input of both AC (single and three phase) and DC supply from Solar Panel along with all accessories and wiring.

3 HP Solar

5 HP Solar

7.5 HP Solar

10 HP Solar

Electrical PUMP

Supply, Installation, Testing & Commissioning of pump motor Set. Pump Motor is set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor, working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB, Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal (above 30 kW)/ Gland packing (PTFE), Base Frame: MS. Starter Kit - with input of both AC (single and three phase) and DC along with all accessories and wiring.

3 HP Electrical

5 HP Electrical

7.5 HP Electrical

10 HP Electrical

Modular Tank

Supply, Instalation, Testing & Commissioning of Modular Water Storage Tank made up prefabricated steel along with Foundation as per specification of following capacities:

0.5 Lakh Litre

1.0 Lakh Litre

1.5 Lakh Litre

2.0 Lakh Litre

2.5 Lakh Litre

3.0 Lakh Litre

Construction of PCC Platform for placement of Sand Filte, Ventury Etc as per drawing & specification complete in all respect

Provisional Sum for Electric Power Connection (For 20 connection (20- 3 Phase) (Bidder should fill Rs. 34,35,591)

Description of Work / Item(s)

Amount

Lot No. 3- Kangra

Supply, Installation, Testing, Commissioning of TURBO CLEAN FILTER ELECTRICAL 50M3/HR including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of Sand filter DIS/SIS JCM 30M3-M 65MM SI WI E M including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of "2" inch Ventury and manifold including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of, Laying & Jointing of full lenghts of HDPE Pipes of specified grade as per IS:4984-1995 and specifications, with testing of pipe line including supply of jointing materials. For the following size

110 mm dia & 10 Kg/Cm^2 pressure

110 mm dia & 6 Kg/Cm^2 pressure

90 mm dia & 6 Kg/Cm^2 pressure

75 mm dia & 10 Kg/Cm^2 pressure

75 mm dia & 6 Kg/Cm^2 pressure

63 mm dia & 10 Kg/Cm^2 pressure

63 mm dia & 6 Kg/Cm^2 pressure

Supply, Installation, Testing, Commissioning of, Laying & Jointing of full lenghts of PE Pipes of specified grade as per relevant IS code and specifications of tender document and specifications, with testing of pipe line including supply of jointing materials. For the following size

75 mm dia & 4 Kg/Cm^2 pressure

63 mm dia & 4 Kg/Cm^2 pressure

50 mm dia & 4 Kg/Cm^2 pressure

40 mm dia & 4 Kg/Cm^2 pressure

16 mm dia & 4 Kg/Cm^2 pressure

Supply, Installation, Testing, Commissioning of dripper 4 LPH PC (Pressure Compensating) made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 63 mm dia Ball valve made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 63 mm dia Pressure Relief valve made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 75 mm dia Non Return valve of made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of Air release valve of suitable size (25/40 mm) as approved including supply of jointing materials.

Supply, Installation, Testing, Commissioning of Butterfly valve 75mm made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of THREE WAY COCK FR Flush Valve 50 mm including supply of jointing materials.

Supply, Installation, Testing, Commissioning of THREE WAY COCK FR Brass Pressure Guage including supply of jointing materials.

Supply, Installation, Testing, Commissioning of BYPASS TEE FOR HEADER 75MM made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of solenoid valve including supply of jointing materials, other accessories complete.

Design, Supply, Installation, Testing and Commissioning of duly wired Controller, power supply and 7” touch screen with IP65 Controller Panel for controlling upto 12 Solenoid Valves. The cost should include all related wiring, fixtures and appurtenances as required for the commissioning of the system. Nothing extra shall be paid for the satisfactory commissioning of the system.

10” Valve chamber of rugged Glass reinforced engineering with plastic lid and strong, impact resistant and robust body. The lid should be of non-slippery design. The lid should be of green colour to match the surrounding green cover. The valve chamber should have a latch arrangement with optional screwing or locking facility. The dimensions of the chamber shall be - Height 250mm, lid diameter 274mm, Bottom diameter 347 mm. The material of construction shall be - Lid PP glass reinforced, Body - Polypropylene

Storage Cum Fertigation Room / Pump Room

Construction of Storage Cum Fertigation Room / Pump Room of various Size as per drawing & specification complete in all respect. (civil, electrical & furniture)

Room Size 8 x4.5x3.0

Room Size 6 x4x3.0

Room Size 4.7 x3.6x3.0

Solar PUMP

Supply, Installation, Testing & Commissioning of Solar pump motor with solar panel and pump motor with complete Integration Solar Panel (standard MMS) supply and installation on ground or roof with structural steel frame and concrete foundation. Testing, Integration and commissioning with pumping motor. Pump Motor is set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor, working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB, Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal (above 30 kW)/ Gland packing (PTFE), Base Frame: MS. Starter Kit - with input of both AC (single and three phase) and DC supply from Solar Panel along with all accessories and wiring.

3 HP Solar

5 HP Solar

7.5 HP Solar

10 HP Solar

Electrical PUMP

Supply, Installation, Testing & Commissioning of pump motor Set. Pump Motor is set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor, working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB, Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal (above 30 kW)/ Gland packing (PTFE), Base Frame: MS. Starter Kit - with input of both AC (single and three phase) and DC along with all accessories and wiring.

3 HP Electrical

5 HP Electrical

7.5 HP Electrical

10 HP Electrical

Modular Tank

Supply, Instalation, Testing & Commissioning of Modular Water Storage Tank made up prefabricated steel along with Foundation as per specification of following capacities:

1.0 Lakh Litre

1.5 Lakh Litre

2.0 Lakh Litre

2.5 Lakh Litre

Construction of PCC Platform for placement of Sand Filte, Ventury Etc as per drawing & specification complete in all respect

Provisional Sum for Electric Power Connection (For 62 connection (58- 3 Phase and 4- 1 Phase) (Bidder should fill Rs. 1,05,30,721)

Description of Work / Item(s)

Amount

Lot No. 4- Mandi

Supply, Installation, Testing, Commissioning of TURBO CLEAN FILTER ELECTRICAL 50M3/HR including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of Sand filter DIS/SIS JCM 30M3-M 65MM SI WI E M including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of "2" inch Ventury and manifold including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of, Laying & Jointing of full lenghts of HDPE Pipes of specified grade as per IS:4984-1995 and specifications, with testing of pipe line including supply of jointing materials. For the following size

110 mm dia & 10 Kg/Cm^2 pressure

110 mm dia & 6 Kg/Cm^2 pressure

90 mm dia & 10 Kg/Cm^2 pressure

90 mm dia & 6 Kg/Cm^2 pressure

75 mm dia & 10 Kg/Cm^2 pressure

75 mm dia & 6 Kg/Cm^2 pressure

63 mm dia & 10 Kg/Cm^2 pressure

63 mm dia & 6 Kg/Cm^2 pressure

Supply, Installation, Testing, Commissioning of, Laying & Jointing of full lenghts of PE Pipes of specified grade as per relevant IS code and specifications of tender document, with testing of pipe line including supply of jointing materials. For the following size

75 mm dia & 4 Kg/Cm^2 pressure

63 mm dia & 4 Kg/Cm^2 pressure

50 mm dia & 4 Kg/Cm^2 pressure

40 mm dia & 4 Kg/Cm^2 pressure

16 mm dia & 4 Kg/Cm^2 pressure

Supply, Installation, Testing, Commissioning of dripper 4 LPH PC (Pressure Compensating) made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 63 mm dia Ball valve made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 75 mm dia Pressure Relief valve made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 63 mm dia Pressure Relief valve made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 75 mm dia Non Return valve of made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of Air release valve of suitable size (25/40 mm) as approved including supply of jointing materials.

Supply, Installation, Testing, Commissioning of Butterfly valve 75 mm made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of THREE WAY COCK FR Flush Valve 50 mm including supply of jointing materials.

Supply, Installation, Testing, Commissioning of THREE WAY COCK FR Brass Pressure Guage including supply of jointing materials.

Supply, Installation, Testing, Commissioning of BYPASS TEE FOR HEADER 75MM made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of solenoid valve including supply of jointing materials, other accessories complete.

Design, Supply, Installation, Testing and Commissioning of duly wired Controller, power supply and 7” touch screen with IP65 Controller Panel for controlling upto 12 Solenoid Valves. The cost should include all related wiring, fixtures and appurtenances as required for the commissioning of the system. Nothing extra shall be paid for the satisfactory commissioning of the system.

10” Valve chamber of rugged Glass reinforced engineering with plastic lid and strong, impact resistant and robust body. The lid should be of non-slippery design. The lid should be of green colour to match the surrounding green cover. The valve chamber should have a latch arrangement with optional screwing or locking facility. The dimensions of the chamber shall be - Height 250mm, lid diameter 274mm, Bottom diameter 347 mm. The material of construction shall be - Lid PP glass reinforced, Body - Polypropylene

Storage Cum Fertigation Room / Pump Room

Construction of Storage Cum Fertigation Room / Pump Room of various Size as per drawing & specification complete in all respect. (civil, electrical & furniture)

Room Size 8 x4.5x3.0

Room Size 6 x4x3.0

Room Size 4.7 x3.6x3.0

Solar PUMP

Supply, Installation, Testing & Commissioning of Solar pump motor with solar panel and pump motor with complete Integration Solar Panel (standard MMS) supply and installation on ground or roof with structural steel frame and concrete foundation. Testing, Integration and commissioning with pumping motor. Pump Motor is set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor, working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB, Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal (above 30 kW)/ Gland packing (PTFE), Base Frame: MS. Starter Kit - with input of both AC (single and three phase) and DC supply from Solar Panel along with all accessories and wiring.

3 HP Solar

5 HP Solar

7.5 HP Solar

10 HP Solar

Electrical PUMP

Supply, Installation, Testing & Commissioning of pump motor Set. Pump Motor is set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor, working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB, Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal (above 30 kW)/ Gland packing (PTFE), Base Frame: MS. Starter Kit - with input of both AC (single and three phase) and DC along with all accessories and wiring.

3 HP Electrical

5 HP Electrical

7.5 HP Electrical

10 HP Electrical

Modular Tank

Supply, Instalation, Testing & Commissioning of Modular Water Storage Tank made up prefabricated steel along with Foundation as per specification of following capacities:

0.5 Lakh Litre

1.0 Lakh Litre

1.5 Lakh Litre

2.0 Lakh Litre

2.5 Lakh Litre

3.0 Lakh Litre

Construction of PCC Platform for placement of Sand Filte, Ventury Etc as per drawing & specification complete in all respect

Provisional Sum for Electric Power Connection (For 73 connection (72- 3 Phase and 1- 1 Phase) (Bidder should fill Rs. 1,25,10,005)

Description of Work / Item(s)

Amount

Lot No. 5- Solan, Sirmaur & Una

Supply, Installation, Testing, Commissioning of TURBO CLEAN FILTER ELECTRICAL 50M3/HR including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of Sand filter DIS/SIS JCM 30M3-M 65MM SI WI E M including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of "2" inch Ventury and manifold including all accessories complete in all respect or direction of Engineer-In-Charge.

Supply, Installation, Testing, Commissioning of, Laying & Jointing of full lenghts of HDPE Pipes of specified grade as per IS:4984-1995 and specifications, with testing of pipe line including supply of jointing materials. For the following size

110 mm dia & 10 Kg/Cm^2 pressure

110 mm dia & 6 Kg/Cm^2 pressure

90 mm dia & 10 Kg/Cm^2 pressure

90 mm dia & 6 Kg/Cm^2 pressure

75 mm dia & 10 Kg/Cm^2 pressure

75 mm dia & 6 Kg/Cm^2 pressure

63 mm dia & 10 Kg/Cm^2 pressure

63 mm dia & 6 Kg/Cm^2 pressure

Supply, Installation, Testing, Commissioning of, Laying & Jointing of full lenghts of PE Pipes of specified grade as per relevant IS code and specifications of tender document, with testing of pipe line including supply of jointing materials. For the following size

75 mm dia & 4 Kg/Cm^2 pressure

63 mm dia & 4 Kg/Cm^2 pressure

50 mm dia & 4 Kg/Cm^2 pressure

40 mm dia & 4 Kg/Cm^2 pressure

16 mm dia & 4 Kg/Cm^2 pressure

Supply, Installation, Testing, Commissioning of dripper 4 LPH PC (Pressure Compensating) made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 63 mm dia Ball valve made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 75 mm dia Pressure Relief valve made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 63 mm dia Pressure Relief valve made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of 75 mm dia Non Return valve of made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of Air release valve of suitable size (25/40 mm) as approved including supply of jointing materials.

Supply, Installation, Testing, Commissioning of Butterfly valve 75 mm made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of THREE WAY COCK FR Flush Valve 50 mm including supply of jointing materials.

Supply, Installation, Testing, Commissioning of THREE WAY COCK FR Brass Pressure Guage including supply of jointing materials.

Supply, Installation, Testing, Commissioning of BYPASS TEE FOR HEADER 75MM made up of PP including supply of jointing materials.

Supply, Installation, Testing, Commissioning of solenoid valve including supply of jointing materials, other accessories complete.

Design, Supply, Installation, Testing and Commissioning of duly wired Controller, power supply and 7” touch screen with IP65 Controller Panel for controlling upto 12 Solenoid Valves. The cost should include all related wiring, fixtures and appurtenances as required for the commissioning of the system. Nothing extra shall be paid for the satisfactory commissioning of the system.

10” Valve chamber of rugged Glass reinforced engineering with plastic lid and strong, impact resistant and robust body. The lid should be of non-slippery design. The lid should be of green colour to match the surrounding green cover. The valve chamber should have a latch arrangement with optional screwing or locking facility. The dimensions of the chamber shall be - Height 250mm, lid diameter 274mm, Bottom diameter 347 mm. The material of construction shall be - Lid PP glass reinforced, Body - Polypropylene

Storage Cum Fertigation Room / Pump Room

Construction of Storage Cum Fertigation Room / Pump Room of various Size as per drawing & specification complete in all respect. (civil, electrical & furniture)

Room Size 8 x4.5x3.0

Room Size 6 x4x3.0

Room Size 4.7 x3.6x3.0

Solar PUMP

Supply, Installation, Testing & Commissioning of Solar pump motor with solar panel and pump motor with complete Integration Solar Panel (standard MMS) supply and installation on ground or roof with structural steel frame and concrete foundation. Testing, Integration and commissioning with pumping motor. Pump Motor is set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor, working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB, Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal (above 30 kW)/ Gland packing (PTFE), Base Frame: MS. Starter Kit - with input of both AC (single and three phase) and DC supply from Solar Panel along with all accessories and wiring.

3 HP Solar

5 HP Solar

7.5 HP Solar

10 HP Solar

Electrical PUMP

Supply, Installation, Testing & Commissioning of pump motor Set. Pump Motor is set of specified duty parameters & guaranteed efficiency of following MOC with specified capacity, horizontal foot mounted TEFC squirrel cage induction motor, working on three phase AC supply with 50 Hz ± 3%, 415 V ± 10%, rated speed 1450 RPM along with fabricated MS base frame, coupling, coupling guard, foundation bolts etc. as per relevant IS. M.O.C.: Impeller & Wearing Rings: CF8M, Casing: Cast Steel WCB, Shaft: SS 410, Shaft Sleeve: SS 410, Mechanical Seal (above 30 kW)/ Gland packing (PTFE), Base Frame: MS. Starter Kit - with input of both AC (single and three phase) and DC along with all accessories and wiring.

3 HP Electrical

5 HP Electrical

7.5 HP Electrical

10 HP Electrical

Modular Tank

Supply, Instalation, Testing & Commissioning of Modular Water Storage Tank made up prefabricated steel along with Foundation as per specification of following capacities:

0.5 Lakh Litre

1.0 Lakh Litre

1.5 Lakh Litre

2.0 Lakh Litre

2.5 Lakh Litre

3.0 Lakh Litre

Construction of PCC Platform for placement of Sand Filte, Ventury Etc as per drawing & specification complete in all respect

Provisional Sum for Electric Power Connection (For 24 connection (20- 3 Phase and 4- 1 Phase) (Bidder should fill Rs. 40,03,098)

Jain Irrigation Systems Ltd.

Jain Irrigation Systems Ltd.

Jain Irrigation Systems Ltd.

Jain Irrigation Systems Ltd.

Jain Irrigation Systems Ltd.