PROVN OF SERVO STABILIZER INCLUDING PANEL, SHED AND ALLIED ITEMS , PROVN OF INTELLIGENT STREET LIGHTS CONTROL SYSTEM AT DCN SUB GP DABATHWA AND SPL REPAIR/ REPLACMENT OF LT O/H LINES SECURITY LIGHTS AND ALLIED WORKS AT GOLDEN FISH ARMY PRE PRIMARY SC

Amount

Surface dressing not exceeding 15cm deep in soft/loose soil complete all as specified and directed

Excavating in post holes (or similar holes) each n.exc. 0.5 cum, getting out in soft / loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers, n.exc. 25cm, watering and removing surplus soil to a distance n.exc. 50m and making good surface, complete all as specified and directed

M&L cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed

M&L for brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:6, complete all as specified and directed

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete mixed with water proofing compound (Nore WPC will be measured and paid separatly)

M&L rendering 10mm thick on fair faces of brick work or cocrete surfaces in CM 1:6 complete all as specified and directed

Supply only intergal water proofing compound Make:- sapseal, JK, Sikka, Dr fixit or equivalent as approved by GE

S&F rolled trusses ( framed ), trussed purlins, crane and fastening heavy bracket framing ( beam, tee,angle channel or flat sections) including distance pieces cleates etc confirming to Fe 410-W(Gde E-250 Quality), complete all as specified and directed

M & L for preparation of new or previously un treated steel and iron surfaces over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome on steel and iron surfaces all as specified and directed.

S&F pre painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of an colour having a tensile strength of 550 Mpa as in roof covering / clading to wall fixed with self tapping screws ,complete all as specified and directed

S&F MS wind tie for roof including securing bolte etc , complete all as specified and directed

M&L hardcore of guage exc. 63 mm but n,exc 100 mm thick deposited spread and levelled in layers n exc 15 mm thick watered and rolled /rammedto a true surfaces , complete all as specified and directed

M&L 100 mm thick cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) as in sub base of floor complete all as specified.

M&L 40 mm thick cement concrete type B 1:2:4 (20 mm graded crushed stone aggregate) as finished even and smooth surface without using extra cement complete all as specified and directed

M&L for preparing new plastered of walls and applying two coats of cement base paint over a coat of primer all as specified and directed by EIC

Supply and fix Voltage stabilizer for automatic operation, three phase, naturally oil cooled, indoor type & designed for input variation between 300 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 250 KVA all as directed by Engr-in-Charge

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 300 sq mm 4 core, complete all as specified and directed.

Excavation in trenches in soft/loose soil n. exc. 1.5 meter wide and n. exc. 1.5 mtr depth and getting out, including trimming the sides and forming bottom surface to required levels for fixing pole/stay assembly and laying/taking out cables complete all as specified and directed.

Returning, filling soil in trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

Removing of excavated material (soil) to a distance n. exc. 50 Mtr and dispositing where directed at a level n. exc. 1.50 Mtr above the starting point complete as directed.

M & L sand cushioning to UG cables (8cm deep before laying of cable and 15 cm deep over the cable). Note :- Punned thickness 18 CM only will be considered for payment.

M & L Bricks as protection cover to under ground cable (with old size fly ash bricks) with width equal to length of brick laid dry and flat abutting each other complete all as specified and directed.

Supply and laying pipe galvanized, “Medium grade”, including fittings 100 mm dia, complete all as specified and directed.

Supplying, fixing and testing 320 Amps, 415V, 4 pole off load changeover switch with sheet metal enclosure, front operated , 50 Hz, fixed to walls/ panels with suitable size clamps, nuts, bolts and washers complete all as specified and directed including making connections and testing complete all as specified and directed.

M& L for earthling complete with galvanized steel earth plate, electrode 600 x 600x6 mm thick , buried directly under ground (earth pit not less than 2.25 m below ground level ) with top edge of the plate not less than 1.5 below ground level connected to galvanized strip 32x6mm by means of nuts, bolts, check nuts & washers, of galvanized iron or steel all as Shown in electrical plate No 3 on Sl. Page 19-497 of MES schedule 2009 part I and connected to existing equipment/system, including all necessary excavation & earth work in hard/dense soil, common salt and charcoal dust mixed & packed 150 mm thick homogeneous layer all around the GI earth plate, GI protection pipe 40mm light grade upto 7.5 meter from electrode complete all as specified & shown on drawings with watering pipe medium grade 20mm dia ,GI sheet funnel with wire mesh ,RCC precast cover 1:2:4 type B1 duly reinforced with TMT bar 8mm dia at the rate of 150mm centre to centre both ways with suitable lifting handle ,pit/chamber in PCC 1:3:6 type C1 ,Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

S & F Street Light Controller (SLC) with the following specification:- (a)It shall have inbuilt IEEE 802.15.4 compliant wireless radio based on 2.4GHz. The SLC enabled streetlights form a mesh network and support two-way communication with the cloud based lighting management server software via a Gateway. (b)It should support 0-10V analog Dimming. Digital input support for connecting sensors. It shall have support of fault detection and energy monitoring at fixture and shall send the notification to Gateway to be reported to the server. It shall have minimum communication range upto 500 meters with near line of sight. (c)It shall support smart mesh topology and should be a self-forming, self-healing network. (d)It shall have data security of 128 bit AES encryption with support of over the air remote firmware and configuration upgrade. (e)It shall support group creation.It shall support rules implementation to support ITTT logic implementation. (f)It shall support time schedules, to be stored locally and executed even if gateway is not installed. (g)It should support astro timer.It should disconnect power to LED driver if the voltage is outside the acceptable range configured.

S&F of RF based Street light 72 Watt LED having provision of SLC as mentioned in item NO 26 above street light is made up of die cast aluminium body having IP 66 protection secondary option for better distribution of light and must have 4 KV internal and 10 KV external surge protection. Make:- Wipro, Polycab, Philips lighting technologies

S & F Smart CCMS Panel with the following specification:- 3 Phase 10 KVA CRCA Sheet Enclosure with stand in 1.6mm thickness IoT device with IEEE 802.15.4 compliant 2.4 GHz radio and 4G for backend communication. Should support configurable reporting interval with default interval configured as 15 minutes. It should have a battery backup of atleast 12 hours. It should send data to management system via cellular network . It should have an inbuilt RTC.It should be capable of switching the lights ON, OFF and DIM based on command received from management server. It should be able to store a minimum of 30 days data backup. It should be capable to form a group of lights to be controlled as a group from management server. It should have 3 phase input supply. (a) Incoming 4P MCB with appropriate rating (b) Outgoing 4P MCB with appropriate rating (c) 4P Contactor with appropriate rating (d) 6 Amp 4P MCB for Control circuit (e) 20 KV TPN Surge Protection (f) 3 Phase Energy Meter (g) A/M Switch and Bypass provision

Note for items No 26 to 29 :- (i) Contractor shall submit warranty for 5 years after completion of work including replacement of any parts of the item or complete item if found defective during warranty period within 48 hrs. After any defect is observed in any item or in the complete system without any extra cost to the department. (ii) Contractor shall pay recharge and all time subscription for five year without any extra cost to the department. (iii) If any faults occurred in part or incomplete system contractor shall rectify the same within 48 hrs. If contractor fails to do the same Rs. 1000/- per day shall be recovered from the contractor in the same contract retention money or if the amount is more than retenteon amount then recovered from any other running contract in the department. (iv) An amount 10% of these items shall be restricted up to warranty period and shall be paid after successfully completion of warranty period. (v) If the defects not rectified by the contractor within 15 days, then department will got rectified the same from other source and rectification cost along with panalty of Rs 1000/- per day shall be recovered from the contractor.

Supply and installation of computer desktop with following specifications Intel Core i3 processor (or superior), 4GB memory, 500 GB HDD, Gigabit Ethernet connectivity, Windows 10 pro, FHD LED monitor (minimum 21”), cordless keyboard and mouse and other necessory accessories. Make: HP/ DELL/ ACER

Taking out old unserviceable cable in any position and supplying, laying or fixing, jointing and testing LT under ground electric power cable Crossed linked polyethylene ( XLPE Cable) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of 16 sqmm 4 core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc.

M&L earthing complete with galvanised steel earth Coil of 50 mm dia have 115 turns, burried directly in to ground ( earth pit size should be 1500mm X 600mm + size of coil) not less than 1500 mm + Coil Size deep below GL with top edge of earth coil not less than 1500mm below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 600mm all around the coil, connected to GI lead wire of 4 mm dia (1.75 m Long) by means of nuts, bolts and washers, checknuts of GI and distance of the earthing bore from the pole should be 1200mm Minimum compleate all as directed by Engineer-in-Charge.

Taking out old unserviceable cable in any position and supplying and fix Fire retardant low smoke (FRLS) PVC insulated unsheathed multi stranded Three core aluminum conductor 1100 volts grade of size 2.5 Sqmm of suitable length for street light for connection junction box and earthing to street light complete and as directed by Engr- in- charge.

Dismantling old existing ACSR conductor of any type/size, complete all as specified and directed.

Dismantling old existing MS cross arms of any type/shape, complete all as specified and directed.

Dismantling old existing Insulators of any type/shape, complete all as specified and directed.

Dismantling old existing LT stay assembly, complete all as specified and directed.

Dismantling and taking down of LT U/G cable of any size/type, complete all as specified and directed.

Dismantling old existing street light fitting of any size/type , complete all as specified and directed.

Supply & fixing or laying galvanised steel tubing light grade (ISI marked) 80 mm diafor protection of under ground cable on poles/ walls under road crossing etc of following sizes including dismantling and taking down existing pipe.

Supply & fixing or laying galvanised steel tubing light grade (ISI marked) 50 mm diafor protection of under ground cable on poles/ walls under road crossing etc of following sizes including dismantling and taking down existing pipe.

Supply, laying, jointing, testing and commissioning LT underground cables, 1100 volts grade, XLPE insulated and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-7098 (marked, laid in trenches / ducts / fixed on poles / walls / laid under roads / paths / drain / culverts or encased in GI pipe complete all as specified and directed. Cables of the following sizes:-(Note;- Rate quotted includes terminal Lugs / road cutting/ wall cutting/ floor cutting/ inter lock working and making good damged portion matching with existing surface with all existing finishes.), complete all as specified and directed. (Note :- Excavation & earthwork, duct work, GI pipe for laying of cable and sand cushioning / cable protection covers etc are beyond the scope of this item and shall be measured & paid for separately under respective items of Sch `A')

(a) 16 Sqmm 3.5 core

(b) 35 Sqmm 3.5 core

(c) 50 Sqmm 3.5 core

(d) 95 Sqmm 3.5 core

(e) 150 Sqmm 3.5 core

Supply and fixing LED street light fitting 70 /72 Watt 230 V , 50Hz AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket , with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection , Surge protection @4Kv internal 8kv external extra to driver with superier finish with top maintanable driver compartment complete including one runs of three core 1.5 Sqmm x3 core (nominal area) PVC insulated and PVC sheathed multi stranded unarmed aluminium conductor cable (MAKE: POLYCAB,FINOLEX, MESCAB, KEI) LT 1100 volt grade Confirming to IS : 7098 FRLS(Inner Sheet) drawn through PVC HD threading pipe for connecting to street light and including FI 25mm x 4 mm clamps 3 Nos suitable size nuts, bolts & painting pipes / clamps/ nuts& bolts all complete with bracket made of 40 mm bore (or higher size to suit the opening of fitting) light grade GI pipe of approx 1.5 mtr length bent to shape and fixed to pole with FI 40mm x 6mm clamps, 2 nos and suitable size necessary nuts & bolts ,including Bracket complete set painting of two coat red oxide and aluminium painted fittings for Street lights with swaged tubular/ PCC pole connected as specified and as directed. complete all as Specified and directed Engr -in -Charge

Supply, installing, testing and commissioning, factory made and tested . LT feeder pillar box (KIOSK), outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated aluminum bus bars 350 Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm CRCA MS sheet and 40x40x4mm thick angle iron frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front opening type, with aprons for cable entry, and fixing danger notice plate made of 1.6mm thick mild steel sheet, vitreous enameled white, of size 20 x 15cm with letter, figures and conventional skull bones in signal red colour and fixed front & back door LT panel etc with voltage and danger indicated in Hindi and English with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) stranded lock with 2 keys, internal wiring with PVC insulated, stranded copper conductor, FRLS cables, IS-694 marked of adequate size but not less than 10 Sqm . The platform shall be such that it is of a height 45 cm above the nearest road level. complete all as specified and directedincluding connections of all out going/in coming existing cables of size 25/35/50/95/120/ 150 sqmm by drawing /digging out cable from loops in trenches out side the Bldg inclusive of necessary excavation and earth work as required and relaying the cables with retrieved bricks and providing new sand cushioning and crimping suitable size copper lugs for terminal connections of cables, necessary brick foundation with plastering to the Panel board, All out going feeders shall be connected by cable through suitable size gland plate / glands.& The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint and taking out of old skelton type panel with control switches complete all as specified and as directed Engr-in-Charge , The scope of work includes the following items

(II) Outgoing :- (i) MCCB 4 Pole, Thermal Magnetic Based 160A, Breaking capacity 25 KA, 415 V, 50 Hz with OL, SC, protection, -02 Nos along with Spreader terminals (ii) MCCB 4 Pole, Thermal Magnetic Based 63A, Breaking capacity 25 KA, 415 V, 50 Hz with OL, SC, protection, -02 Nos along with Spreader terminals (iii) MCB TPN 63 Amp C-Curve - 2 No (Make-Schneider / Legrand L&T )

M&L Earthing complete as per electrical plate No 5 of MES SSR Part I with galvanised steel plate earth electrode 60 cm x 60 cm x 6.30mm, burried directly vertically in ground in a pit of depth not less than 2.25 metres below ground level with the top edge of earth plate at a depth not less than 1.5m below normal ground level connected to and including galvanised iron or steel earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel earthing wire protected by galvanised iron or steel pipe 15mm bore light grade and connected to continuous earth wire on pole/ test point. Watering pipe shall be 20mm bore GI medium grade including excavation and earth work in any type of soil, chorcoal, salt, funnel, PCC pit and RCC cover complete all as specified and tested complete including taking out old earthing. Note for srl item No. 25 ,32 &45 :- (a) Irrespective of what is shown in drawings, the concrete pit shall be in PCC (1:3:6), type C-1 and 40mm thick precast cover slab of RCC (1:2:4) type B-1, using 20mm graded stone aggregate with suitable handle and reinforcement (10 mm # bars @ 100 mm). (b) Item includes the cost of GI pipe, clamp for protection of earth lead / strip including earth lead / strips upto 7.5m. Any variation below or above shall be adjusted through deviation order at the applicable rates given in SSR-2020.

Supplying, transporting to site, erecting, and fixing in position, steel tubular swaged and welded poles of Overall height 9 metres, type 410 SP-31, IS-2713 marked, with mild steel base plate (fillet welded to poles), pole cap/final taper plug, bolts, nuts, washers etc including painting of poles with one coat of red oxide primer and two coat of aluminium paint before fixing and one coat of aluminium paint after fixing on exposed surfaces and embedded portion shall be painted with two coat of black bituminous paint including the portion above coping shall be painted in alternative 05 Nos bands/straps of black & white colour starting with white colour (each band of 30cm wide) by two coat of synthetic enameled paint up to 1.5 m height complete all as specified and directed. Make:- India tube Co./Jindal/National Tube/ M/s Mohan Lal & Sons

Supplying and fixing in repair automatic operation street light timing switch having lighting control (ON-OFF) through Astronomical Calculation of Sun rise/ sun set by setting date, time and degree of longitude and latitude without separate light sensors and prewired with suitable size of copper conductor single core PVC insulated and sheathed caable and all mechanism fitted into panel, outdoor type , pole mounted with FI 25x4mm clamps , nuts, bolts and washers dully painted, connecting and testing factory made , epoxy powder coated, Single Phase street light panel, digital 24 hrs, suitable for 6KW (max) complete with 32/40 Amps TP Contactor, and 32 Amps TPN MCBs and fixed on pole/ wall/ feeder pillar complete all as specified and directed.

S&F service main distribution (SMC JUNCTION BOX ) box minium inside size 395 x 235 x 150 with Bus bar 200 amps 4 pole for distribution of multiple nos of service connectios , (ISI marked )weather and moisture proof, nuts and bolted bus bar system, 200 Amps capacity complete all as specified and directed. (Make : Mahendra/ Sintex and equivalent )

S&F pole mounting type junction box factory made of minium size 300 x 200 x 105 mm of FRP sheet duly powder coated with front openable hinged door , locking arrangements, with 4 Nos aluminium bus bars 40 Amps rating mounted on porcelain insulator, cable glands and lugs consisting DIN type rails for fixing MCB SPN 6/10 Amps, 10 kA suitable for domestic loading , -01 no. including mild steel flat iron clamp 2 Nos made out of 40x4mm FI, nuts, bolts and washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.(MCB shall not be measured and paid separately and shall deemed included in the unit rate)

Taking out existing unserviceable juntion box any type and size and S&F pole mounting type junction box factory made of size 350x250x150mm of FRP sheet duly powder coated with front openable hinged door , locking arrangements, with 4 Nos aluminium bus bars 40 Amps rating mounted on porcelain insulator, cable glands and lugs consisting DIN type rails for fixing MCB SP 6/10 Amps, 10 kA suitable for domestic loading , -01 no. including mild steel flat iron clamp (2 Nos) made out of 40x4mm FI, nuts, bolts and washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed byEngr in Charge.

Dismantling of existing street light fitting of any wattage and specification from the existing pole and refixing in the same at new location as directed by Engr-in-Charge

Jain Traders

KUKREJA BROTHERS