The work of enhancement of 100 KVA Arondekarwada DTC to 200KVA DTC to solve transformer loading and low voltage problem at Arondekarwada Harmal in Mandrem Constituency under the jurisdiction of Sub Division III Agarwada under Division XVII Mapusa

Amount

COST OF MATERIAL

G.I. Turnbuckle with eye bolt 11KV

H.D.G.I Stay wire 7/10 SWG

HDGI X arm Clamp for 11 mtrs long RCC pole

HDG cut point channel of 1.3 mtr long of channel ISMC 75 x 40 x 6 mm with HDG clamps 7 nut bolts etc. for 11.0 mtrs RCC pole

HDGI clamps & HDG nut bolts etc. for 11 mtrs along RCC pole

HDGI structure material for DP.

11 KV, 200A Horn gap fuse unit (Set of three).

9KV, 5KA Lightning arrestor

11KV Disc Insulators 70kN wirth Metal part

MS Distribution Box along with 12 Nos 200 A kit kat fuse and MCCB odf 400A, 415 Volts.

DTC Metering Unit

XLPE Single Core unarmoured XLPE 300 sq mm 1.1KV grade(1run per phase & 1run for neutral) (12 mtrs per phase)

G.I earthing pipe 2500mm long, 40mm dia class B fabricated and perforated filled with homogenous mixture of 20Kgs of salt and sand / soil inclusive of excavation, backfilling & spreading of excavated earth evenly as per Drg No. CEE/E-829. The work includes excavation of pit in any type of soil classified under Soft Strata of Annexure A of CPWD-8.

XLPE Single Core unarmoured XLPE 50 sq mm 1.1 KV grade

Enamelled Danger board 400V of size 250mm x 200 mm.

HDGI barbed wire

FRP Fencing complete with Gate as per specification for Distribution Transformer (Size 4Mx3Mx2M) with Concreting for FRP Fencing supports with plinth (0.3x0.3x0.5) Cu.m. x 12 nos. Each ratio 1:3:6

LT shackle insulator without Metal parts

LT pin insulator with Metal parts

AAC conductor 'ANT'

AAC conductor 'GNAT'

Numbering of poles with yellow/black paint( Inclusive of erection charges)

COST OF ERECTION

RCC pole 11 mtr

Stay rod with plate

G.I. Turnbuckle with eye bolt 11KV

H.D.G.I Stay wire 7/10 SWG

Break insulator 8kv(44KN)

HDGI Stay clamp for RCC pole 11 Mtr

HDGI Stay clamp For RCC pole 9 Mtr

GI Nuts & bolts

HDGI 11 KV 'V'shape cross arm with HDG nut bolts for 11 mtrs long RCC pole

HDGI X arm Clamp for 11 mtrs long RCC pole

HDG top fitting cross arm of channel ISMC 75x40x 6 mm 0.7 mtrs long along with HDG clamps & HDG nut bolts etc. for 11 mtrs along RCC pole

HDG cut point channel of 1.3 mtr long of channel ISMC 75 x 40 x 6 mm with HDG clamps 7 nut bolts etc. for 11.0 mtrs RCC pole

HDGI clamps & HDG nut bolts etc. for 11 mtrs along RCC pole

HDGI structure material for DP.

G.O.A.B. Switch 11 KV 400 Amps

11 KV, 200A Horn gap fuse unit (Set of three).

9KV, 5KA Lightning arrestor

11KV Disc Insulators 70kN wirth Metal part

200 KVA 11KV/0.4KV Distribution Transformers level II losses, Alluminium Winding, with Bimetallic Terminal Connectors, Energy Efficiency Level-II as per IS: 1180 (Part-I): 2014

MS Distribution Box along with 12 Nos 200 A kit kat fuse and MCCB odf 400A, 415 Volts.

DTC Metering Unit

XLPE Single Core unarmoured XLPE 300 sq mm 1.1KV grade(1run per phase & 1run for neutral) (12 mtrs per phase)

XLPE cable armoured 3 ½ C X 185 sq.mm 1.1 KV Grade (12mtr per feeder) - Feeder 1, 2 & 3

G.I earthing pipe 2500mm long, 40mm dia class B fabricated and perforated filled with homogenous mixture of 20Kgs of salt and sand / soil inclusive of excavation, backfilling & spreading of excavated earth evenly as per Drg No. CEE/E-829. The work includes excavation of pit in any type of soil classified under Soft Strata of Annexure A of CPWD-8.

XLPE Single Core unarmoured XLPE 50 sq mm 1.1 KV grade

Enamelled Danger board 400V of size 250mm x 200 mm.

HDGI barbed wire

FRP Fencing complete with Gate as per specification for Distribution Transformer (Size 4Mx3Mx2M) with Concreting for FRP Fencing supports with plinth (0.3x0.3x0.5) Cu.m. x 12 nos. Each ratio 1:3:6

HDG LT 4 pin cross arm channel type HDG clamps & HDG nut bolts etc for 7.5 mts long RCC pole

HDG LT 2 pin cross arm channel type HDG clamps & HDG nut bolts etc for 7.5 mts long RCC pole

HDG LT 4 pin cross arm channel type HDG clamps & HDG nut bolts etc for 9 mts long RCC pole

LT shackle insulator without Metal parts

Metal parts for LT shackle insulator

LT pin insulator with Metal parts

AAC conductor 'ANT'

AAC conductor 'GNAT'

Dismantling of old Material

Removing of detoriorated Rail pole 11 mtr

Removing of HDG 11KV V shape cross arm

Removing of HDG 2pin cross arm

Removing of detoriorated HDGI structure material

Removing of detoriorated G.O.A.B. Switch 11 KV 400 Amps

Remvoing of 11 KV, 200A Horn gap fuse unit

Removing of 9 KV, 5KA Lightning arrestor

11KV Disc Insulators 70kN wirth Metal part

Removing of Aluminium wound 100 KVA Distribution Transformer.

Removing of MS Distribution Box

Distribution Transformer Metering Unit.

Removing of 1.1KV, 3.5 core 95sq.mm A2XFY Aluminium Armoured XLPE Cable

Removing of 1.1KV, 3.5 core 185sq.mm A2XFY Aluminium Armoured XLPE Cable

Removing of AAC ANT conductor

Removing of AAC GNAT conductor

Removing of HDG LT 4 pin cross arm

Removing of HDG LT 2 pin cross arm

LT shackle insulator with Metal parts

LT pin insulator with Metal parts

Deepti Enterprises