GEK-29/2020-21

Amount

Schedule 'A' Section - I

Excavation in trenches in hard/tense soil not exceeding 1.5 metre deep and not exceeding 1.5 metre wide and getting out including dressing / trimming sides and leveling/grading and ramming of bottom of excavation complete all as specified.

Returning, filling in including spreading, leveling, watering and well raming excavated soid in layers not exceeding 25 cm thick, filling back in trenches after cables have been laid and tested, poles, stays, struts have been erected and tested complete all as specified.

Removing of surplus soil to a distance n.exc 50 mtr and depositing at a level n.nexc 1.5 mtr above starting point where directed complete all as specified.

Double walled corrugated HDPE duct pipe of 40 mm inner dia confirming to IS:14930 (Part-II) of approved colour with fittings for cable protection complete all as directed. Make :Finolex / Duraline / Telerex /Gemini

Supply and fixing and replacement GI pipe, light grade 40 mm bore, ISI Marked for protection to cable along the pole/across road crossing/passing through culvert complete all as specified.

Supply and fixing in repairs straight through (Heat shrinkable) joint kit suitable for 1.1 KV UG XLPE cable of size 70 to 150 Sqmm 3.5 core. Make-Raychem / Denson / 3M

Supply and fixing in repairs straight through (Heat shrinkable) joint kit suitable for 1.1 KV UG XLPE cable of size 185 to 300 Sqmm 3.5 core. Make-Raychem / Denson / 3M

Supply and fixing in repairs straight through (Heat shrinkable) joint kit suitable for 1.1 KV UG XLPE cable of size 630 Sqmm 3.5 core. Make-Raychem / Denson / 3M

Supply and fixing in repairs indoor termination (Heat shrinkable) joint kit suitable for 1.1 KV UG XLPE cable of size 630 Sqmm 3.5 core. Make-Raychem / Denson / 3M

Supply, laying, testing and commissioning of cable LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. Mm 2 core confirming to IS specification including taking out existing unserviceable cable complete all as specified and as directed.Make: Make: Polycab/CCI / Finolex

Supply, laying, testing and commissioning of cable LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq. Mm 2 core confirming to IS specification including taking out existing unserviceable cable complete all as specified and as directed.Make: Make: Polycab/CCI / Finolex

Supply, laying, testing and commissioning of cable LT XLPE insulated, PVC sheathed armoured, 1.1KV grade using stranded conductor aluminium of size 25 Sqmm 4 core confirming to IS specification including taking out existing unserviceable cable complete all as specified and as directed.Make: Polycab/CCI / Finolex

Supply & fixing and replacement Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground

Supply & fixing in repairs galvanised steel wire 4.0 mm dia buried in ground as earth lead all as specified and directed

M&L for MCCB 250 Amp , 4 pole 415 Volts, rupturing capacity 36 KA Adj thermal fixed magnetic MCCB including fixing arrangements complete and taking out old MCCB all as per directed by Eng- in -charge Make- BCH / Legrand DPX3 / Siemens / L&T D sine series

M&L for MCCB FP,160 A rupturing capacity 36 kA with adjustable Thermal Magnetic Based Release (O/C & S/C Protection) MCCB including fixing arrangements complete and taking out old MCCB all as per directed by Eng- in -charge Make- BCH / Legrand DPX3 / Siemens / L&T D sine series

M&L for MCCB 100 Amp , 4 pole 415 Volts, rupturing capacity 16 KA Adj thermal fixed magnetic MCCB including fixing arrangements complete and taking out old MCCB all as per directed by Eng- in -charge Make- BCH / Legrand DPX3 / Siemens / L&T D sine series

M&L for MCCB 63 Amp , 4 pole 415 Volts, rupturing capacity 16 KA Adj thermal fixed magnetic MCCB including fixing arrangements complete and taking out old MCCB all as per directed by Eng- in -charge Make- BCH / Legrand DPX3 / Siemens / L&T D sine series

Supply & fixing in repair junction box from LT electric poles and Supply and fixing Junction box of size 168 x 253 x 115 outdoor type, weather proof, factory made out of PVC sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and out going cable / wire complete comprising with the followings :- (a) Bus bar with two aluminium strips 100Amps capacity insulated with insulators, incl colour coding , including control wiring from bus bar to MCB (b) MCB SP 6Amps - 01 No. Make of MCB: ABB/Havells/Legrand (c) clamp made out of 25mm x 3mm flat iron duly welded with nuts & bolts complete all as specified and directed. Make:Hensal / Clipsal / Sintex

Dismantaling exixting old and unserviceable street light brackets and Supply & Fixing Bracket made out of GI light grade pipe of 40 mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos MS clamp 25mm x 4mm and 04 sets of nuts,bolts and washers including painting with two coats of synthetic enamel paint over a red oxide primer complete all as specified & directed.

Dismantaling exixting old and unserviceable security light brackets and Supply & Fixing Bracket made out of GI light grade pipe of 32 mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos MS clamp 25mm x 4mm and 04 sets of nuts,bolts and washers including painting with two coats of synthetic enamel paint over a red oxide primer complete all as specified & directed.

Supply & fixing wiring for circuit/submain wiring alongwith earth wire with the size 2x1.5 sq. mm + 1x1.0 sq. mm earth wire of FR PVC insulated copper conductor, single core cable from junction box to light fitting.

Taking down old street light fitting and supply & fixing LED type street light fitting 60 watt ,Pressure die cast aluminum housing Heat resistance toughened glass. IP 66 protection with lens & Better optics for uniform distribution with electronic driver incl connection with 3 core 1.5 sqmm .copper conductor from junction box / over head line Make: Crompton greaves cat part No. LSTP-60-CDL or Havells cat part No. LHETBXU7JA7B060 or Halonix cat part No. HLSLD-11-60-CWL equivalent in Philips

S & F and replacement LED security light 30 watt pressure die cast housing with individuals LEDs & Lens with modular secondary optics and IP65 protection with electronics driver and copper conductor 3 core of 0.7 sqmm from ceiling rose to security light. Make: crompton greaves cat part No. LSTS-30-CDL or Bajaj cat part No. (BCLST 30W LEDI) or equivalent in Philips

Supply and fixing &replacement Time switch astro type 1 Phase - 2W 2 Channel, Base/DIN with necessary electric connection including setting the time and other specification as per directed by the Engineer-in-charge Make:L&T cat part No. T2DDT0 or Legrand Model No : REX 2000, D-41 catpart No 03720 or equivalent in BCH

Supply and fixing and replacement power contractor 4 Pole 415 volt 63 Amp incl neseccary electrical connection as per directed by the Engineer-in-charge .Make:L&T type MCX 12 cat part No. CS97014 orequivalent in Legrand or BCH

Supply and fixing and replacement power contractor 2 Pole 240 volt AC3 rating 40 Amp & AC1 rating 55 Amp incl neseccary electrical connection as per directed by the Engineer-in-charge . Make:L&T type MNX 40-2P cat part No. CS90242 orequivalent in Legrand or BCH

Taking out old unsv and S&F LED street light 45 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type all as specified and directed. Make-Havells/CG/Philips/Bajaj

M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation of electric poles, struts PCC blocks and fair finish to exposed surfaces without using extra cement etc complete all as specified.

Supply & Fixing and replacement Super heavy duty Power capacitor of any capacity complete as per model No-Ducapower capacitor ( super heavy duty),

Scraping old painting from existing poles 11.00 mtrs long and M&L for painting to poles incldg cross armsflats, nuts bolts etc complete with two coats of aluminium paint.complete to angle /channels/claamps etc and Making black and white strips 30mm high upto 1.50 mtr from ground level incl marking of pole no in black paint complete all as specified and as directed.

S&F machine presed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60MM thickness M-35 grade complete all as specified and as directed by Engr-in-Charge

Amount of credit of Rs. 7240.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Pankaj Traders

Rajesh Agencies

Santosh Enterprises

Tridev Construction Company

bharat refrigeration and electric co.