Loading…
Loading…
Tender Value
₹53.2 Cr
EMD Value
₹1.1 Cr
Closing Date
30 Jun 2026, 12:00 pmClosed
Yes (up to 4 members)
Yes (up to 4 members)
Two Packet System
EPC [ Single Stage ]
No
Not Applicable
Lowest to Highest
180 days
Expenditure
Capital (Works)
TENDER
14 conditions · 2 needing a document upload
The Bidder shall have a minimum Net Worth (the "Financial Capacity") of Rs. 2,65,79,500/- (Rs. Two Crore Sixty Five Lakh Seventy-nine Thousand Five Hundred only) at the close of the preceding Financial Year . (Cl. 2.2.2.2 of RFP Document)
For minimum required Technical Capacity & eligibility, please Refer Clause.2.2.2 of RFP document
Defination of Similar Work :- Any Civil Engineering works comprising of construction of railway station work which includes buildings and/or passenger amenities like Platform shelters/FOB, metro station, airport terminal & bus terminal and Commercial real estate project such as educational institution, hospitals & office complex.
34 conditions · 17 needing a document upload
In case, submission of Bid Security in the form of Bank Guarantee, or Account Payee Demand Draft, or Fixed Deposit Receipt, or Banker's Cheque, or e- payment Gateway of Authority, following shall be ensured: i.A scanned copy of (Account Payee Demand Draft/ Fixed Deposit Receipt/ Banker's Cheque/ e- payment Gateway of Authority/ Bank Guarantee Bond) along with all other relevant documents as specified in the RFP document (Cl. 2.11.1) shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii.The original (Account Payee Demand Draft/ Fixed Deposit Receipt/ Banker's Cheque/ e- payment Gateway of Authority/ Bank Guarantee Bond) along with all other relevant documents specified in the RFP document (Cl. 2.11.2) should be delivered in person to the official nominated as indicated in the RFP document (Cl. 2.11.4) within the stipulated time (Cl. 1.3 of RFP document)
Whether DSC is in the name of Authorised Signatory as per Appendix-II or Appendix-III ? (It should be in the Corporate Capacity). Refer Cl. 2.14.1.1 of RFP document.
In case of JV, whether it is Registered in the e tender portal i.e www.ireps.gov.in and the registration is valid as on the date of submission of bid ? (Refer Cl. 2.14.1.2) of RFP document.
Whether Bid Security is valid for a minimum period of 90days beyond the validity period for the Tender? (Refer Cl. 1.3 & 2.20.6 / iv of RFP document.)
Whether the certificates issued by Statutory Auditor/CA include UDIN? (Refer Cl. 2.2.2.7 of RFP document)
Please upload Appendix-IA of RFP document (Letter comprising the Technical Bid). (Refer Clause 2.1.4, 2.11.1) {To be signed by the Authorised Signatory of Bidder/Lead Member of JV/Consortium}
Please upload Appendix-IB of RFP document (Letter comprising the Financial Bid). (Refer Clause 2.1.4, 2.11.1) {To be signed by the Authorised Signatory of Bidder/Lead Member of JV/Consortium}
Please upload Annexure I of Appendix-IA of RFP document (Details of the Bidder). {To be signed by the Authorised signatory on behalf of ......Bidder / JV / Consortium}
Please upload Annexure II of Appendix-IA of RFP document (Technical Capacity of the Bidder). (Refer to Clauses 2.2.2.1, 2.2.2.4 and 2.2.2.6 of the RFP) {To be provided by the Bidder/separately for all members in case of a JV/Consortium}
Please upload Annexure III of Appendix-IA of RFP document (Financial Capacity of the Bidder). (Refer to Clauses 2.2.2.2, 2.2.2.8(i), 2.2.2.7(iii) of the RFP) {To be provided by the Bidder/separately for all members in case of a JV/Consortium}
Please upload Annexure IV of Appendix-IA of RFP document (Details of Eligible Projects). (Refer to Clauses 2.2.2.1, 2.2.2.4 and 2.2.2.6 of the RFP) {To be provided by the Bidder/separately for all members in case of a JV/Consortium}
Please upload Annexure V of Appendix-IA of RFP document (Statement of Legal Capacity). {To be signed by the Authorised signatory on behalf of ......Bidder / JV / Consortium}
Please upload Annexure VI of Appendix-IA of RFP document (Guidelines of the Department of Disinvestment ). (Refer Clause 1.2.1) {To be signed by the Authorised signatory on behalf of ......Bidder / JV / Consortium}
Please upload (i) Appendix-II of RFP document (Filled in format for Power of Attorney for signing of Bid). (Refer Clause 2.1.5, 2.11.1) {To be submitted by the Proprietor / Person authorised by Board Resolution (in case of Firm/Company)/ partner in case of Partnership firm} (ii) Supporting documents (Refer Notes: of Appendix-II) such as (a)The bidder shall submit the extract of the charter documents and documents such as a board or shareholders' resolution/ power of attorney in favour of the person executing this Power of Attorney for the delegation of power hereunder on behalf of the Bidder, as applicable. (b) As applicable, For a Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued or a conforming Appostille certificate.
If applicable, please upload (i) Appendix-III of RFP document (Filled in Format for Power of Attorney for Lead Member of {Consortium /Joint Venture}). (Refer Clause 2.1.6, 2.11.1) (To be executed by all members of the Consortium/Joint Venture ) (ii) Supporting documents (Refer Notes: of Appendix-III) such as (a) Also the bidder shall submit the extract of the charter documents and documents such as a board or shareholders' resolution/ power of attorney in favour of the person executing this Power of Attorney for the delegation of power hereunder on behalf of the Bidder, as applicable. (b) As applicable, For a Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued or a conforming Appostille certificate. (In case not a Consortium/Joint Venture, a "Not applicable declaration" may be uploaded)
If applicable, please upload Appendix-IV of RFP document (Filled in Format for Joint Bidding Agreement for { Consortium /Joint Venture}). (Refer Clause 2.1.11, 2.11.1) (To be executed by all members of the Consortium/Joint Venture ) (ii) Supporting documents (Refer Notes: of Appendix-IV) such as (a) Each Joint Bidding Agreement should attach a copy of the extract of the charter documents and documents such as resolution / power of attorney in favour of the person executing this Agreement for the delegation of power and authority to execute this Agreement on behalf of the { Consortium /Joint Venture} Member. (b) For a Joint Bidding Agreement executed and issued overseas, the document shall be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney has been executed. (In case not a Consortium/Joint Venture, a "Not applicable declaration" may be uploaded)
Please upload scanned copy of the Appendix-VII of RFP document (Filled in Bank Guarantee Bond from any scheduled commercial bank of India) (On non-judicial stamp paper, which should be in the name of the Executing Bank towards Bid Security) OR Instrument/document through which BID SECURITY has been deposited. (Refer Clause 1.2.4, 2.20.1 of RFP document)
Please submit the document in support of Class-III DSC. (Refer Clause 2.14.1.1 of the RFP)
Please upload all other relevant documents as mentioned in Clause 2.11.1 of RFP document.
Please upload Appendix-IC of RFP document (Contractor's work plan) (Refer Clause 2.11.1 & 3.1.6.1) {To be signed by the Authorised Signatory of Bidder/Lead Member of JV/Consortium}
Please upload Appendix-ID of RFP document (Supporting Documents) (Refer Clause 2.11.1.1) {To be signed by the Authorised Signatory of Bidder/Lead Member of JV/Consortium}
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Major upgradation of Bhubaneswar New Jn. Station (Phase-I)
EPC-CECONIIBBS2026017
EPC-CECONIIBBS2026017
Open
Works - General
18 Months
Khordha, Odisha
₹0
₹1.1 Cr
21 Apr 2026
21 Apr 2026
16 Jun 2026
9 items across 2 schedules · ₹1,00,73,438.73 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| CLADDING WORK | — | — | — | — | |
| STONE WORK DRY CLADDING | — | — | — | — | |
| 1 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:(a) Structural analysis design and preparation of shop drawings pressure equalisation or rain screen principle required, proper drainage of water to make watertight including checking of all the structural and functional design.(b) Providing, fabricating supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour approved shades made out of 4 mm thick aluminium composite panel material consisting of mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF /Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5 MS with Hot Dip Galvanised with serrations serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost all mock ups at site, cost of all samples of individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till handing over of the building for occupation. Base frame work for ACP cladding is payable under relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per Architectural drawings, as per item description, specified, as per the approved shop drawings as directed by the Engineer-in-Charge. However, the purpose of payment, only the actual area on external face of the curtain wall with Aluminium Composite Panel Cladding (including width groove) shall be measured in sqm. up to decimal places. | Sqm & for as it and of 3 mm and / and bi- of the the the the as and for the of two | 618 | 5,015.05 | 30,99,300.9 |
| STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL | — | — | — | — | |
| General | — | — | — | — | |
| 2 | Providing and supplying aluminium extruded tubular and other aluminium sections as per architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by Engineer-in-Charge. ( The item includes cost material such as cleats, sleeves, screws necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on account). The weight of aluminium extruded section shall be taken for purpose of payment. | Kg the T6 the of etc. this | 796.1 | 414.3 | 3,29,824.23 |
| 3 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system structural glazing (with open joints) for linear well as curvilinear portions of the building for heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS part III (the system must passed the proof test 1.5 times design wind pressure without any failure), including functional design of the aluminium sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage protection against fire hazard including: Fabricating and supplying serrated M.S. hot galvanised /Aluminium alloy of 6005 T5 brackets required sizes, sections and profiles etc. accommodate 3 Dimensional movement achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with structural silicone sealant of required bite size in clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick of sizes, shapes and profiles, as required as per site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision drainage of moisture/ water that enters the curtain glazing system to make it watertight, incorporating principles of pressure equalization, providing suitable gutter profiles at bottom required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour fabricating and installation of aluminium grid, installation of glazed units, T & P, scaffolding other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of samples of the individual components for testing an approved laboratory, field tests on assembled working structural glazing as specified, cleaning and protection till the handing over of building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, per item description, as specified, as per approved shop drawings and as directed by Engineer- in-Charge. | Sqm of as all 875 at and (b) dip of to for the a and the for by (if for and the all in the the as the the | 658 | 3,510.5 | 23,09,909 |
| 4 | Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required specified, comprising of an outer heat strengthened float glass 6 mm thick, of approved colour shade with reflective soft coating on surface # 2 approved colour and shade, an inner Heat strengthened clear float glass 6 mm thick, spacer tube 12 mm wide, desiccants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, per the Architectural drawings, as per the approved shop drawings, as specified and as directed by Engineer-in-Charge. The IGUs shall be assembled the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) payment, only the actual area of glass on face # of the glass panels (excluding the areas of grooves and weather silicone sealant) provided fixed in position, shall be measured in sqm.(i) Coloured tinted float glass 6 mm thick substrate with reflective soft coating on face # 2, + 12 Air gap + 6mm Heat Strengthened clear Glass approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to %, shading coefficient (0.25- 0.28) and U value 3.0 to 3.3 W/m2 degree K etc. The properties performance glass shall be decided by technical sanctioning authority as per the site requirement. | Sqm 6- and and of as the in For 1 the and mm of 20 of of | 658 | 3,718.7 | 24,46,904.6 |
| Schedule total | ₹81,85,938.73 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
BhubaneswarNewStationFloorPlan-Model.pdf Bhubaneswar New Station Floor Plan
ATTACHMENT
Bhubaneswar New Station Master Plan
ATTACHMENT
SheduleDA.pdf
ATTACHMENT
RFPBBSN.pdf
ATTACHMENT
DraftEPCAgreement.pdf
ATTACHMENT
ScheduleDB.pdf
ATTACHMENT
ScheduleDC.pdf
ATTACHMENT
FOB6mwide1.pdf
ATTACHMENT
FOB6mwide2.pdf
ATTACHMENT
BhubaneswarNewStationFloorPlan-Model.pdf
ATTACHMENT
BhubaneswarNewStationMasterPlan18.04.25-Model.pdf
ATTACHMENT
RFPDocumentBBSN-Rev1.pdf
CORRIGENDUM
Replytopre-bidCorrigendum-3.pdf
CORRIGENDUM
VClinkforPre-bideeting.pdf
CORRIGENDUM
Corrigendum-1.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .