Karnataka

AOC

Works

Buildings

CONSTRUCTION OF NEW ANGANVADI-1 BUILDING AT GOWDANAHALLI VILLAGE IN AMBLE GP OF CHIKKAMAGAURU TALUK (RESERVED FOR CAT-2A)

Rural Development and Panchayat Raj Department

RDPR Division Office Chickmagaluru | Karnataka

Amount: ₹10.1 LCloses: 22 Jul 2026Closed

Timeline

Published10 Jul 2026
Closed22 Jul 2026
Awarded—

Bids

1 Bid22 Jul 2026

#	Company	Amount	Status
1	P N CHIDAMBAR ₹10.1 Laccepted-aoc	₹10.1 L	accepted-aoc

Tender Value

₹10.1 L

EMD Value

₹12,637

Closing Date

22 Jul 2026, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

CHAITHRA

Mobile Number

Work Description

CONSTRUCTION OF NEW ANGANVADI-1 BUILDING AT GOWDANAHALLI VILLAGE IN AMBLE GP OF CHIKKAMAGAURU TALUK (RESERVED FOR CAT-2A)

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT27681

Reference Number

RDPR/2026-27/BD/WORK_INDENT27681

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Chickmagaluru

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredKPWD Registered Class-IV Certificate or Attach above contractor Registration Certificate

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years 2021-22 to 2025-26 achieved in at least One financial years a minimum financial turnover in all classes of civil engineering construction works only of Rs.10.11 lakhs. usually not less than One time the estimated annual payments under this contract. Approved by CA with UDIN Number and also Profit & Loss statements 26 AS

RequiredTo qualify for Award of this contract, each Tenderer should have in his name in the last five years, satisfactorily completed as prime contractor, Any Consturction Work of value not less than Rs.2.53 lakhs. Attach Work done Certificate issued by competent authority of rank not less than Executive Engineer with Indent Number is Compulsory. Otherwise tender will be rejected.

RequiredThe contractor belonging to CAT- II-A should upload Caste Certificate issued by Competent Authority

RequiredThe contractor belonging to the CAT- IIA shall be domicile of the state of Karnataka for more than 10 years. Attach Relevant Document issued by competent Authority

RequiredAttach Adhaar Card, Pan Card and GST Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The tenderer should be a PWD registered Contractor

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund and Contractors should follow strictly prevailing rules of labour act.

Conditional tenders will not be accepted.

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders. The item rates quoted shall include cost of royalty charges on construction materials & other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts labor, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work.

The bidder shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The tender fee is non-refundable and The employer is not responsible for any delay in accessing KPP Portal.

All Scanned Documents of the Original should be up-loaded, Executive Engineer/ Superintending Engineer/ Chief Engineer reserves the right verify the Original Documents before approval, 0riginal documents / Certificates for qualification shall be produced when called for during evaluation of tender.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

The Tenderer should maintain the Work during defective liability period as indicated in The Contract Data

The materials like bitumen, Steel, Cement etc., required for the work shall be procured by the tenderer themselves and should be got tested by the Quality Control Authority before use on the work.

If the tender of the successful tenderer is seriously unbalanced in relation to the Employers estimate of the cost of the work to be performed under the contract, the Employer may require the Tenderer to produce detailed price analysis for any or all items of the Bill of Quantities, to demonstrate the internal consistency of those prices with the construction methods and schedule proposed. After evaluation of the price analyses, the Employer may require that the amount of the performance security set forth in Clause 24 be increased at the expense of the successful Tenderer to a level sufficient to protect the Employer against financial loss in the event of default of the successful under the contract.

As per Government order FD 447 EXP-12 2022 dated 30/07/2022, 18% GST will be added to the Contract amount separately. And Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18% of Amount Put to tender) amount is kept in form of Lump sum in sanctioned estimate according to guidelines in Common SR (GO:PWD 51 RDF 2019 Bengaluru Dt:18.03.2022). Tender has been inviting through an Option with INCLUSIVE. But the item wise rates do not include GST. Hence, GST will be paid separately for the quoted amount accordingly.

The employer reserves the rights to reject one or all tenders without assigning any reason.

In case if the death of a contractor, after executing the agreement / commencement of the work, his legal heir, is an eligible registered contractor and is willing, can execute and complete the work, at the accepted tender rates, irrespective of the cost of the work.

PERFORMANCE SECURITY - The successful tenderer shall furnish Performance Security Deposit (Achievement Guarantee) at 5% of the amount put to tender with in 20 days after approve of tender as per rule 29.5 of the tender and clause 44 of the agreement in the form of D.D duly pledged in the nature of EXECUTIVE ENGINEER, PRED, Chikmagaluru

All documents should be uploaded by the contractor is to be attested by the authorized notary or not below the rank of Executive Engineer and should be produced for verification at any stage of process as and when saught for .Failure to produce original documents leads to rejection of Tender.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Item for which no rates or price has been entered in will not be paid for by the Employer when executed & shall be deemed covered by the other rates & prices in the bill of quantities.

The tender validity period is 90Days from the date of opening of Tender

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Bid document.

Name, address and telephone number of the Tenderers may provide references if contacted by the Employer

The contractor belonging to CAT- II-A should upload Caste Certificate issued by Competent Authority

The contractor belonging to the CAT- IIA shall be domicile of the state of Karnataka for more than 10 years. Attach Relevant Document issued by competent Authority

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹12,637

Important Dates

Last Activity

22 Jul 2026

Published

10 Jul 2026

Download Ends

18 Jul 2026

BOQ Preview

•

CONSTRUCTION OF NEW ANGANVADI-1 BUILDING AT GOWDANAHALLI VILLAGE IN AMBLE GP OF CHIKMAGALUR TQ

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing Honne wood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and onforming to IS: 15622, of approved make, in all colours and shades, laid...

•

Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...

•

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the wall...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

•

Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat mo...

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elas...

•

Providing and applying white cement based putty of average thickness

•

1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Finishing walls with Premium Acrylic Smooth exterior paint with

•

Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up

•

resistant, Alkali & Water resistant of required shade: New work...

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with

•

primer & two coats of acrylic emulsion black paint including finishing

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Supplying & errection of RCC rings for well steining of 0.3 Mtr Depth us ing M-20 grade concrete using clean graded granite or trap or jelly of approved quality 20mm and down size well compacted inclu...

•

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch)suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer inchar...

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm …. etc. as required. 25mm

•

Supplying and fixing PVC/metal conduit Deep junction box

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator.

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board 6Amps 3 pin Top

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board 6 Amps lamp holder

•

Supplying & fixing of retrofit type LED bulb W with OPAL acrylic diffuser comprising of LED source

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power inpu...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

•

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

•

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

TENDER NOTIFICATION 14 2026-27.pdf

Tender Document • 2.62 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

P N CHIDAMBAR

₹10.1 Laccepted-aoc