Work 33 Work of construction of park on vacant land of Municipal Corporation in front of AKS Fabricators in City Zone Ward No. 32 Harvansh Nagar, Street No. 3 in front of Hanuman Temple.

Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or

S/L P:C:C (1:6:12) with 40 mm gauge brick ballast fine sand of 1.25 f.m and cement in foundation and under floor including all materials, labour, tools, & plant etc all completed as per the direction of engineer

R.C.C work with cement, approved coarse sand & 2cm gauge approved stone grit in proportions of 1:1.5:3 in lintels of doors & windows excluding supply of reinforcement and its bending, but including its fixing and binding wire including necessary cantering and shuttering etc.and

Steel reinforcement for R.C.C work including straightening cutting,bending, placing in position and binding all complete upto plinth level mild steel and

First class Brick Work in (1:4) cement & four coarse sand 2.20 F.M. morter in foundation and plinth and T&P etc all completed as per the direction of engineer-in-charge. (AS PER PWD SOR 2022 PAGE NO 20 SI NO 6.05 ITEM NO 305 (a)

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M.in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30

2 cm thick Damp Proof Course with Cement and approved coarse sand 1:2 with and including water proofing as ordered by the Engineer incharge in the proportion as specified by the manufacturer including supply of all materials, labour, Tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

S/L C:C (1:2:4) with 20 mm stone grit, coarse sand & cement etc all complete as the direction of engineer in charge. (AS PER PWD SOR 2022 279 (a).

12 mm thick plaster with cement and coarse sand of1.25 fineness modules in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work (AS DER

Providing wall putty on old surface with approved quality material of Berger/J.K./Birla or similar make 2 coats

Finishing wall with weather coat of approved make and quality on old surface with two or more coat to give an even even shade after throughly brushing the surface free from mortar droping and other foreign matters and sand papered smooth

Painting or varnishing with valsper or other approved high grade enamel or superior synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should