Expansion and modification of existing terminal building and other allied works at Solapur Airport.

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.

3.5x 50 Sq.mm Al.conductor.

3.5x 35 Sq.mm Al.conductor.

2x 16 Sq.mm Al.conductor.

Supply Installation Testing & Commissioning of self contained drinking water cooler with inbuilt RO system energy efficient compressor confirming to IS: 1475 (Part 1): 2001 & with eco-friendly refrigerant, storage type, storage/cooling capacity 80 lts/60 Ltrs/hr comprising of stainless steel tanks number of faucets -2 Nos. maximum power consumption 1550 watts suitable for operation on 230 Volts 50Hz AC supply complete in all respect.Similar to model no. SDLX680ROA of blue star make including requried civil works etc. as requried.

Supply Installation Testing & Commissioning of automatic voltage stabilizer 4 KVA capacity with time delay relay suitable for operation on 230 Volts 50 Hz AC supply (including connection of incoming & outgoing cables).

Supply Installation Testing & Commissioning of Euronics make model no. EH27NW or similar of approved make hand dryer suitable for operation on 230 Volt 50 Hz. 1 AC power supply having big blowing volume & powerful blowing rate with size die casting body available in SS brush finish & white powder coating finish i/c. connection testing & commissioning etc. complete as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe/DWC pipe as required.

upto 3.5x 90 Sq.mm Al.conductor.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required.

3.5x 50 Sq.mm Al.conductor.

3.5x 35 Sq.mm Al.conductor.

2x 16 Sq.mm Al.conductor.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. 100mm

Supplying and laying of following size DWC/HDPE 120 mm dia pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSH PVC insulated copper conductor single core cable etc as required.(Group C). With Medium range Switches(Make: MK Blenz or equivalent approved make)

Wiring for group controlled (looped) light point/fan point/exhaustfan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/ recessed GI conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing the following, with connection etc. as required with medium range switches.(Make:Roma/ Anchor or equivalent approved make) 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing the following, with connection etc. as required with medium range switches.(Make:Roma/Anchor or equivalent approved make) 6 pin 15/16 amp socket outlet.

Supplying and fixing following way, single phase and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) 2 + 12 way, Double door.

Supplying and fixing following way, horizontal type three phase and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required 63 A

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) Triple pole and neutral

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supply of 1 x 18 Watt LED down lighter luminaries suitable for recess mounting . The LED luminaries shall sleek and low height. he system wattage should be maximum 18Watt, efficacy should be greater than 78Lm/Watt,THD should be less than 15% with driver including all necessary accessories complete as requried, meeting upto date LED specification, similar to Havells LLHEBMCP7UZ1W018.

Supply of 2'x2' LED fixture with housing made of metallic CRCA powder coated body and a high efficiency diffuser along with driver,system wattage maximum of 45 Watts,lumen output of lamp greater than 2500 lumens, power factor > 0.9,rated life of L70 @ 40,000 hours, system efficacy greater than 60lumen/watt ,with suitable driver and including all necessary accessories as required complete.Make:- Cat No: Polycab PMD0404001 or equivalent approved make.)

Supply of 1x20 LED(4 feet) fixture having Self ballasted LED Batten. Extruded Thermoplastic body with PC diffuser and with all its accessories similar to Polycab Cat no. INTENSO VX LED BATTEN 4 FEET 20 W or equivalent approved make

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Earthing with G.I. earth pipe 4.5 mtr. long, 40 mm dia including accessories and providing manosory enclousers with cover plate and having locking arrangement and watering pipe etc. with charcoal/ coke and salt etc. as required.

Supplying and laying of 25mmx5mm at 0.5 mtr below ground level as strip earth electrode including connection, termination with G.I. nut, boly, spring, washer etc. as requried.

Providing and fixing 25mmx5m G.I. Strip on surface or in recess for connections etc. as requried

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

3.5x 50Sq.mm Al

3.5x 35 Sq.mm Al

2 X 16 sq. mm Al.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supply and fixing of exhaust fan of 200 mm sweep", in existing opening by providing suitable fixing arrangement, interconnection,wiring etc as required.

Supply, Installation, testing and Commissioning of wall mounted fan of size 300mm sweep, suitable for operation on 240 V, 50Hz, A/C supply as required.

Supply, Installation, testing and Commissioning of ceiling fan of size 1200mm sweep, suitable for operation on 240 V, 50Hz, A/C supply as required.

M/s LEESHA ELECTRICALS

SKYLINE ELECTRICALS

Manish Electricals