WB/SPG/ZP/N-127/8/25-26

Repairing Works

Removing old scales , blisters etc. of interior surface of walls, ceiling by scraping etc .and preparing smooth and even surface with rendering or cement mortar (1:2) (asnecessary), to make the surface suitable for receiving distemper.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary 15 mm. thick plaster ( 1:4 )

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly,complete as per manufacturer's specification and as per direction of the EIC. One Coat Water based interior grade Acrylic Primer

Acrylic Distemper to interior wall,ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

Supplying, fitting and fixing boiling water proof ply conforming to IS:710-1977 bonded with phenol formaldehyde synthetic resin conforming toIS :848-1974of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. 4mm

Supplying fitting, fixing decorative lamination conforming to IS:2046:1995 as per approved make, brand, finishand thickness with fitting, fixing the same on Particle/MDF/Ply Boards with recommended /approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in charge.The rate includes the cost of labour,adhesive and all incidental charges thereof.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On timber or plastered surface With super gloss (hi-gloss) Two coats (with any shade except white)

Removal of rubbish,earth etc. from theworking site and disposal of the same beyond the compound, in conformity with theMunicipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect asper direction of Engineer in charge

Supplying, fitting & fixing High Pressure steam Cured Non Asbestos fibre cement standard ceiling board (Density>1300KgperCu.m. ) of size 595mm X595mm conforming IS 14862 and type B ,catagory III of ISO 8336,tested as per AS-1530 Part 3 and BS-476Part 4,5,6,7&8, should be placed in the Grid module to form a false ceiling all complete as per drawing & direction of Engineer - in- Charge. 4mm thick Fibre Cement Standard ceiling board.

Add G.S.T@ 18%

Add labour welfare Cess@ 1%