90 H(F)(W)/2023-24

Amount

Part - A ( Material) Following Material Supplied by the Contractor:-

Supply of G.I. Pipe 6'' Dia

Alluminum Lug

LT Clamp

LT Shackle Insulator

11 KV X- Arm Holding Clamp

11 KV F Clamp for PCC Pole

Holding Clamp Top & Dropper Channel

Fuse Set Unit Clamp

Different Size of Clamp for Supporting (Top, tEE off, Dropper GI Pipe ETC) Rs. 213

Nut & Bolt

Carriage including loading,unloading & Proper stacking of following Stock materials from store/departmental store to Dump site distance 0 to 20 Kms. (distance approx)

PCC Pole 8.5 Mtr. Long

ST Pole 11 Mtr. Long

11 KV XLPE Cable 3x70 sqmm

11 KV XLPE Cable 3x120 sqmm

11 KV XLPE Cable 3x185 sqmm

11 KV outdoor Cable Jointing kit 3x70 sqmm

11 KV outdoor Cable Jointing kit 3x120 sqmm

11 KV outdoor Cable Jointing kit 3x185 sqmm

11 KV Staight Through Cable Jointing kit 3x120 sqmm

Three Phase DO Fuse Set Unit

AB Cable (3x120+1x95+1x16)

ACSR Weasel Conductor

ACSR Rabbit Conductor

L T PVC Cable 1x400 sqmm

11 KV Outgoing Pannel CTR (200/100/5A)

T/F 63 KVA

T/F 100 KVA

T/F 250 KVA

T/F 400 KVA

Other matching Materials

Dragging of PCC/ST Pole from dump site to pit site

Fabrication and Errection of Double Pole Support on PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Errection of Single Pole Support on PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Stringing, Sagging, Binding and jumpering of ACSR Weasel Conductor as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of ACSR Rabbit Conductor as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of AB Cable 3x120 Conductor as per RESSPO Norms

Grouting and Binding of Stay with in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles as per RESPO Norms

Mounting of 63 KVA Transformer as per RESSPO Norms.

Mounting of 100 KVA Transformer as per RESSPO Norms.

Mounting of 250 KVA Transformer as per RESSPO Norms.

Mounting of 400 KVA Transformer as per RESSPO Norms.

Construction of Plinth of Transformer Size 2x2x2.5 Mtr including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Fencing of Transformer Plinth with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Laying of underground 11 KV 3x70 sq mm XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Laying of underground 11 KV 3x120 sq mm XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Laying of underground 11 KV 3x185 sq mm XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x70/120/185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x120 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Four Wheel Trolly Complete for Transformerr

Installation of 11 KV Outgoing Pannel CTR (200/100/5A)

Fixing of Three Phase DO Fuse Set Unit

Railway Crossing Permission Fee

Rect. Old and Used Scrap Conductor from site to Store Center

Rect. Back 25 KVA Transformer

Rect. Back 63 KVA Transformer

Rect. Back 100 KVA Transformer

M/S R.G. TRADERS