Supply of Furniture WBSRDA, Uttar Dinajpur Division

Amount

Providing, supplying and placing of Executive Table for Executive Engineer. Dimension of the table: 1800W x 2100D x 750H mm. Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management. Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. The product should have IAQ Gold, Greenpro, GRIHA 2019 and Greenguard (by UL) certification.

Providing, supplying and placing of Executive Chair for Executive Engineer. The product should have IAQ Gold, Greenpro, GRIHA 2019, Greenguard (by UL) and BIFMA Level-2 certification. SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D). HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm. ARMRESTS : The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: 360' revolving type. Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. Tilt tension adjustment can be operated in seating position. 5-position Tilt limiter giving option of variable tilt angle to the chair. Seat/back tilting ratio of 1: 2. The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter. Overall Dimensions of Chair: Seat Height -43.1-53.1cm Height -112.7-130.2cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm.

Providing, supplying and placing of 5' L-Shape Table for FO, AE & JE. The table size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board with PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. ERU -3616 size shall be 1050 Width x 450 Depth x 705 Height. The top of Finesse ERU -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. The OEM should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (All ISO certificate must be from NABCB/IAF recognized accreditation body), IGBC Platinum and AIOTA certification.

Providing, supplying and placing of Working Table L-Shape of size shall be 1200 Width x 600 Depth x 750 Height.The Top shall be in white cedar and black and shall be 18 mm PLB with PVC lipping.The side panels shall be 18 mm thickPLT with PVC .The Modesty panel shall be 18 mm thick PLT. The Modesty panel shall be in a combination of black & white cedar. Pedestal size shall be 390 Width x 435 Depth x 529 Height.The top is 18 mm thick PLB . The two drawer mobile pedestal is available in one size .The top and drawer fronts shall be in white cedar while the other components shall be in black. The OEM should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (All ISO certificate must be from NABCB/IAF recognized accreditation body), IGBC Platinum & AIOTA certification.

Providing, supplying and placing of Visitor's Chair (Stand). SEAT/BACK ASSEMBLY: The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured and back should be injection moulded from black Co-polymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam should be designed with contoured lumbar support for extra comfort. SEAT SIZE: 45.0cm(W) x 42.0cm.(D). BACK SIZE: 39.0cm(W) x 38.0cm.(H). SEAT / BACK COVERS: The seat and back covers should be injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45 +/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMREST ASSEMBLY : The armrests should be made of black integral skin Polyurethane wtih 50-70 Shore 'A' Hardness and reinforced with M.S. insert. The P.U. armrests should be then fixed to black powder-coated ( OFT 40-60 microns ) armrest brackets made of of 0.5 ± 0.05 cm. thk. HR steel and fitted with claddings made of injection moulded Polypropylene. FIXED TYPE mechanism: The fixed type mechanism should be without back tilt. TUBULAR FRAME: The tubular frame should be made up of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns). Overall Dimensions of Chair: Seat Height -49.5cm. Height -88.5cm. Width & Depth of Chair as measured from pedestal - Width-56.0 cm and Depth-54.0 cm. The product should have Greenguard (by UL) certification.

Providing, supplying and placing of Executive Chair FO & AE (Normal). The product should have IAQ Gold, Greenpro, GRIHA 2019, Greenguard (by UL) and BIFMA Level-2 certification. SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D). HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm. ARMRESTS : The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: 360' revolving type. Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. Tilt tension adjustment can be operated in seating position. 5-position Tilt limiter giving option of variable tilt angle to the chair. Seat/back tilting ratio of 1: 2. The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter. Overall Dimensions of Chair: Seat Height -43.1-53.1cm. Height -112.7-130.2cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm.

Providing, supplying and placing of Chair (Rolling). The product should have Greenguard (by UL) certification. SEAT/BACK ASSEMBLY: The seat and back should be made from 1.2 ±0.1 cm.. thk. hot pressed plywood method described in. and upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam should be designed with contoured lumbar support for extra comfort. SEAT SIZE: 45.0cm(W) x 42.0cm.(D). The product should have Greenguard (by UL) certification. BACK SIZE: 39.0cm(W) x 47.0cm.(H). SEAT /BACK COVERS: The seat and back covers should be injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR polyurethane foam should be moulded with density = 4+/-21kg/m and hardness load 16_± 2 kgf for 25%_compression. ARMREST ASSEMBLY : The one-piece armrests should be injection moulded from black Nylon. The armrests should be fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel. PERMANENT CONTACT mechanism: The permanent contact mechanism should be designed with the following features: 360° revolving type. 14° ±2°maximum-back-tilt-only. Upright position locking. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow should be .3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal should be 62.0 ±0.5cm. pitch-centre dia. (72.0 ±1.0cm with castors). TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in Black Nylon. Overall Dimensions of Chair: Seat Height - min 43.0 to max 54.0cm. Height - min86.1 to max 97.1cm. Width & Depth of Chair as measured from pedestal - Width-71.0 cm and Depth-71.0 cm.

Providing, supplying and placing of Steel Almirah which shall have an overall size of 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. The product should have IAQ Gold, Greenpro, GRIHA, Greenguard (by UL) certification.

Supplying and placing in position Computer Table Table of the following specifications. Its size shall be 1200W x 600D x 750H mm.TABLE MATERIAL - The Table Panels are made from 18 ±0.5mm thk Pre-LaminatedExterior grade PLT ( Grade I,Type-II )(IS 12823) with PVC edgebanding on all sides. Drawer bottom panels are made up of 9mm thick (±1mm)Pre-laminated Particle Board. Locking has been provided on top drawer only. CONSTRUCTION - Table has provision of CPU monitor, Drawer and Sliding KBPT.The Table has a knock-down construction. The OEM should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (All ISO certificate must be from NABCB/IAF recognized accreditation body), IGBC Platinum, AIOTA certification.

Supply, Fitting & Fixing of Open type Multiflex Rack as per the below-mentioned dimension.

Providing, supplying and placing of 14-Seater Conference Table of Dimension: 4200W x 1500D x 740H mm. Work top--Made of 25mm thick MDF­one side pre­laminate board conforming to IS­14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Access panels provided with soft closing hinges. Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. Wire Management-Bottom cabinet with door is provided for flow of wires and cables. Cutout provision below Access flap at four locations for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables (eg. HDMI,VGA-A,etc). The product should have Greenguard (by UL), IAQ, Greenpro and GRIHA-2019 certification.

IMPRINT TRADING PRIVATE LIMITED (BID ID -6584655)

JYOTI COMMERCIAL CORPORATION (BID ID -6590264)