Fabrication and construction of 10 nos. portable shed of suitable size (10foot x 8foot x 7foot) along with electrification work for temporary security check post for different projects of Kathara Area.

Amount

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting outand disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer incharge

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

Filling available excavated earth (excluding rock) in trenches, plinth.sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and for all lift

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources :6 graded stone aggregate 20 mm nominal size derived from naturalsources)

Structural steel work riveted, bolted or welded in built up sections, trussesand framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and installing 3ft x 2ft sliding windows with Aluminum frames including glazing, rubber lining and smooth operational tracks.

Fabricating and installing of iron gates of size 7ft x 3ft made from MS square pipes and MS sheets with lock and key arrangement, including locking mechanism as per design specifications. The frame should be treated with anti-rust coating.

Providing and fixing 6mm thick plywood panels for interior walls, ceiling and flooring, including smooth finishing, cutting to size and fixing with screws and adhesive. Boards should be termite-proof.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MOB distribution board,415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25A

Providing and fixing following capacity TP&N disconnector fuseswitch unit inside the existing panel boardwith ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 32A TP&N

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessedmedium class PVC conduit, with piano type switch, phenolic laminated sheet,suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

SSupplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and neutral

Supplying and drawing 2 x 4 sq. mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supply of wall fan of minimum sweep 300mm

Supplying of Screws and necessary items for Installation of wall fan

Total impact of GST for the purpose of CTC

Sandeep and Co. (BID ID -1103221)

M/S EKHLAQ KHAN (BID ID -1103100)