Construction Of Machinery Shed 1364 Sq Mtr

Amount

Processing Unit - Civil Work (01)

Excavation for foundation inearth ,soil of all types,sand,gravelandsoftmurum,including removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed,dewatering,preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring ands trutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means (Item 21.01)

Excavation for foundation in hard murum and boulders including removing the excavated material up to adistance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means

Filling in plinth and floors with Contractors Hard Murum in 15 cm to 20 cm layers including watering, ramming and compaction complete as per specifications and site instructions. BD.A.11/263.

Providing dry trap graded rubble stone soling (22.5cm) thick with brought ot material by client, including hand packing and filling the gap with stone chips, metal sand and gravel including ramming consoldating and compaction complete as per specification and site instruction. BD.A.12/264.

Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water,Steel centering,formwork,laying/pumping,compacting,roughening the mif special finish is to be provided,finishing if required and curing complete,with fully automatic micro process or based PLC with SCADA enable dreversible DrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete.With fine aggregate(Crushedsand VSI Grade)

Providing and laying in situ cement concrete M20 with tremix treatment for 100mmthickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete.

Providing and laying in situ/ReadyMix cement concrete M-20 of trap/granite/quartzite/gneissmetal for R.C.C.work in foundations like raft, strip foundations ,grillage and footings of R.C.C.columns and steel stanchionsetc .including bailing out water,Steelcentering formwork,laying/pumping cover blocks,compaction and curing rough ening the surfac e if special finish is to be provided (Excludingreinforcementandstructuralsteel)etc.complete,with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concreteBatchmixplant(Panmixer)etc.complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/ReadyMix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C.columns as per detailed designs and drawings or as directed including steel centering,formwork,coverblocks,laying/pumping,compaction finishing the for med surfaces with cement mortar 1:3 of sufficient minimum thicknes to give as mooth and even surface or roughening if special finish is to be provided an d curing etc. complete,(Excludingreinforcementandstructuralsteel).with fully automatic micro processor based PLC with SCADA enabled reversible DrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate(Crushedsand VSI Grade)

Providing and laying Cast in situ/ReadyMixcement concrete in M-25 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed design sand drawings or as directed including steel centering, form work,coverblocks,laying/pumping,compaction and roughening the surface if special finish is to be provided and curing etc.complete.(Excludingreinforcementandstructuralsteel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concreteBatchmixplant(Panmixer)etc.complete.With fine aggregate(Crushed sand VSI Grade)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing uncoursed rubble masonry of trap stone in c.m 1:5 proportion in foundation and plinth of inner and outer walls, pointing with cement mortar 1:3 to the external walls as per the Architectural drawing, specification, including dewatering, striking joints on unexposed faces and watering curing etc.complete. BD.H.2/329.

Providing IInd class Burnt Brick Masonry with conventional ground moulded burnt bricks in cement mortar 1:6 proportion in Superstructure including dewatering, striking joints, raking out joints at all heights as per Architectural drawing, specification and site instructions, including watering, curing, scaffolding etc. complete. BD.G.5/315

Providing cement plaster 12mm thick in one coat in c.m 1:4 proportion with neeru finishing to stone or brick surface in all positions including scaffolding and curing etc. BD.L.2/368

Providing sand faced cement plaster 25mm thick in c.m 1:4 proportion using Khasalia / Kasaba / approved quality of sand in all positions, including base coat, scaffolding, keeping the surface of the base coat rough to receive the sand face treatment finishing the surface by taking out grains and curing etc. complete. BD.L.7/369.

Providing and applying whitewash in two coats to plastered or masonry surface including scaffolding and preparing the surface by brushing and brooming down complete as per the specification and Consulting Engineer'sInstructions etc. BD.P.1/411.

Providing and applying Washable Oil Bound Distemper of approved colour and shade to old and new surfaces in two coats including scaffolding preparing the surface to receive the priming coat and finishing coat complete.BD.P.5/413.

Providing and applying washable acrylic emulsion paint with roller finish in 2 coats of approved colour and shade to existing surface including scaffolding, preparing the surface to receive paint and applying putty etc. as per the specification and Consulting Engineer'sInstructions etc. complete.

Providing and fixing rolling shutters/ Sliding shutters fabricated from 20 gauge steel laths with side guides, bottom rail, brackets, door suspension shaft, rolling spring, locking arrangement, and housing at the top including mechanical gear operation arrangement with primary coat and two or more coats of ready mixed paint of approved make and colour to give an shade accpording to the specification and site instruction of Consulting Engineeretc. complete with provision of man entrance / opening in the Rolling shutter of size 750mmx1500mm. BD.T.56/511 + As specified.

Providing and fixing in position anodised alluminium windows / ventilators of various size with openable / sliding alluminium frame, shutter glazing clips / rubber / PVC Gasket of approved quality chromium plated brass wigs other alluminium fixture and fastening handle, stopper etc. complete as per the instruction of Consulting Engineer and of approved make and colour.

Providing and casting in situ c.c M20 (1:11/2:3) of rap / granite / quartzite / gneiss metal for Chajja as per detailed RCC drawing and design or as directed including baling out water, centering, form work, compaction, finishing the formed surface with cement mortar (1:3) proportion of sufficient minimum thickness to give a smooth and even a surface or roughening if special finish is to be provided and curing etc. complete as per specification, structural drawing and details and instruction of the Consulting Engineer(excluding mild/tor steel reinforcement). BD.F.6/300.

Processing Unit - PEB Work

Supplying, fabricating, erecting and fixing in position of steel structures at all elevations using fusion welding quality steel E-350 (Fe490) conforming to IS:2062 - 2006. Rate shall include cost of cutting, welding, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position welded/bolted Structural steelwork in columns, beams, trusses, purlins, platforms, ladders, monorails, staircases ,supports, strengthening of steel members etc. at site to line and level, supply of approved bolts/nuts/washers etc. complete as per drawings including painting as per G4/G5/G6 before erection and all materials and labour charges etc., complete and including Sand blasting & painted with 1 coats of enamel paint (Berger EPILUX SG – HHI 664002) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer - 35-50 micron etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager. (The rate quoted shall include cost of bolts, nuts, washers, welding and electrodes required for the complete work).

Supplying, fabricating and erecting of Cold Formed Light Gauge structural steel members conforming to IS:801/ IS:811 hot-dip galvanised to IS:4759 - 96 including cutting, welding or bolting, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position.

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre

Providing and fixing UPVC Roof made up of 3layers roofing material of thickness 2mm having width of 1130mm and of required Length having Tensile strength not less than 330Kilogram/cm2,including fastening with self drilling screw having washers made of stainless steel etc. complete.

Providing and fixing Turbo ventilator 24 inch

Processing Unit - Roof Accessories Supplying ,fabricating and erecting all flashing ,ridge,rain water down take pipes ,gutter etc complete as directed site in charge

Corner flashing

Center ridge

Gable flashing

Down take

Roof gutter

Processing Unit - Royalty Statement

Royalty For Snad

Royalty For Murum and other Material

Processing Unit - Material Testing

Cement Fineness, Consistancy, setting Time, Compressive Srenght, Specific Gravity

i) Mix Design with all tests on basic mterials

ii)Concrete Cube compressive strenth

Bricks Water Absorption, Compressive stength, Efflorance

Sand i) Gradation

Murum ii) Atterberge Limit

Steel Reinforcement Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter,

Processing Unit - Electrification

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable up to and including 16 sq. mm complete as per specification no. CW-EXNCTR

Making trench of suitable width and depth in soft soil for laying provided LT cable up to and including 16 sq.mm complete as per specification no. CW-EXN-CTR

Supplying & erecting mains PVC unarmoured cable 1100Volt grade ISI mark 3 core / 2.5 sqmm stranded / solid copper complete erected on wall with duly painted G. I. Saddle @

Supplying & erecting weatherproof powder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C. B. with industrial two pin plug socket 10 A and 3 pin plug top 10 A with top cover necessary connection etc complete with approved make.

Providing point wiring for street light with PVC unarmoured cable 1100Volt grade ISI mark 3 core 1.5 sqmm stranded / solid copper erected on wall with G. I. Saddle duly painted @ 0,25 m C/C rigidly grouted in the wall with the help of plated screw including 4” x 4” M. S. box 2 way with epoxy painting &

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting LED street light fitting suitable for 20 to 25W, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS

Supplying and erecting street light Wall bracket made from 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP

Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Supplying and erecting marine plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete.

Supplying and erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted suitable for SPMCB of 12 ways on iron / GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting 18 guage M.S. Box powder coated (4"x4") 3 way for mains connection.

Supplying & erecting Siemens type brass cable glands for 3 to 4 core 6 sq. mm. /2 to 4 core 10 sq. mm. for XLPE armoured cable as per specification No. CB-GL

Supplying shockproof type hand lamp with lamp holder, bulb/ lamp 100 W guarded glass and 30 mtr. 3 core PVC flexible cord with hand shield type 3 pin 6 Amp. Plug top.

Point wiring for independent plug in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW

Supplying and erecting Street light bracket made from 25 mm. dia ‗B‘ class G.I. Pipe, 0.6 m in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC

Supplying & erecting mains with 2 x 2.5 Sq.mm stranded copper PVC insulated wire with 2 x 1.5 Sq.mm copper PVC wire in PVC casing - caping 20 mm on wall / ceiling.

Supplying & erecting main with 2 x 4.00 Sq.mm stranded copper PVC insulated wire with 2 x 1.5 Sq.mm copper PVC wire in PVC casing - caping on wall / ceiling.

Supplying and erecting double pole switch surface type/ flush type 240V, 32A with indicator lamp & fuse as per specification no. SW-SWR/BDP.

Supplying and erecting double pole metal clad switch withHC type fuse and neutral link 240V, 32A on iron / GI frame as per specification no. SW-SWR/MDP ..

Supplying & erecting 3W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting T8 Fluorescent tube day light 1200mm 36 W

Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary.

Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF

Supplying and fixing wiremesh (Jali) cover suitable for fitting / fan or for any purpose, complete with necessary materials. The jali cover shall be made from good quality G.I. wire mesh

Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size

Supplying and erecting street light Wall bracket made from 25 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB

Supplying & erecting CRCA sheet metal one wayenclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board complete.

Road Work - Civil Work

Providing,laying,spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness ,hand packing to proper grade and camber, applying and brooming requisite type of screening / binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means-Grading I (Using Screening Type A (13.2) mm Aggregate)

Supplying hard murum/kankar at the road site, including conveying and stacking complete.

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.

Providing and constructing 75mm.thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal +70% Hand broken (bybreaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @2Kg/sqm ,spreading 12mm. size chips compacting with three wheel static roller having weight 8to10MT.to achive the desired degre of compaction as per Technical Specification Clause 506 etc.complete. Including picking of existing WBMsurface. (VG-30bulk bitumen rates are considered to arrive at rates)

Providing and applying tack coat with bitumen emulsion (RS1)using emulsion pressure distributer at the rate of 0.20 kg per Sq.M.on the prepared bituminous cleaned with mechanical broom

Open Graded Premix Surfacing-Providing and Laying OGC 20mm thickness composed of 13.2mm to 5.6mm aggregates premixed with bituminous binder transported to site with VTS,laid over a previously prepared surface,finished to the required grade, level,alignment, and rolling to achieve the desired compaction but excluding prime/ tackan dSeal coat.For Bitumen of specified grade--USINGdrummix type hotmix plant with SCADA, Paverand Vibratory roller (OverMPMSurface) (VG-30bulkbitumenratesareconsidered to arrive at rates)

Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7mm size and penetration bitumen of specifid grade @1.2kg/Sq.m, preparing existing road surface by mechanical means, spreading chips and rolling, by static roller having weight 8to10MT. etc.complete.(VG-30 bulk bitumen rates are considered to arrive at rates)

Road Work - Royalty Statement

Royalty For Murum and other Material

Road Work - Material Testing

Stone Aggregate Crushing value or impact value.

Compound Wall - Civil Work

Excavation for foundation in Earth, Soils of all types, gravel and soft murum including removing the excavated material upto a distance of 50m and /or beyond the building area and all lifts, stacking and spreading as directed, dewatering, shoring and strutting, preparing the bed of foundation and necessary back filling etc.complete. BD.A.1/259.

Excavation for foundation in Hard Murum and boulders, including removing the excavated material upto a distance of 50 meters and/or beyond the building area and all lifts, stacking and spreading as directed, dewatering, shoring, strutting, preparing the bed of foundation and necessary back filling etc.complete. BD.A.3/259.

Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water,Steel centering,formwork,laying/pumping,compacting,roughening the mif special finish is to be provided,finishing if required and curing complete,with fully automatic micro process or based PLC with SCADA enable dreversible DrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete.With fine aggregate(Crushedsand VSI Grade)

Providing uncoursed rubble masonry of trap stone in c.m 1:5 proportion in foundation and plinth of inner and outer walls, pointing with cement mortar 1:3 to the external walls as per the Architectural drawing, specification, including dewatering, striking joints on unexposed faces and watering curing etc.complete. BD.H.2/329.

Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45mm dia G.I.pipe (Rezan/concenti Deletedire 0.75mm dia) with hot dipand G.I.coated hooks as per drawing supported on M.S.angle 50x50x6mm at 2.5mtr.c/c including fixing and fastening with wire, painting M.S.angles with one coat of red lead primer and two coat of oil paint etc. complete.

Compound Wall - Royalty Statement

Royalty For Murum and other Material

ESHS Compliance

Management Strategies and Implementation Plan (MSIP) to manage Environmental, Social , Health and Safety (ESHS) Risk and ESHS Code of Conduct

MS SHREE GANESH CONSTRUCTION KHUDUS