Renovation Interior Fit out Work of office space of MOMA at 10th Floor Pt Deen Dayal Upadhyay Building CGO Complex New Delhi

ABSTRACT OF COST

S NO DESCRIPTION Cost of DSR Items Cost of Non-DSR Items TOTAL

3.00 SANITARY / PLUMBING WORKS 31,894.30 12,505.00 44,399.30

5.00 WI-FI & LAN WORKS PASSIVE WORK 2,46,240.00 3,41,664.00 5,87,904.00

6.00 ACTIVE COMPONENT FOR DATA 0.00 10,89,830.00 10,89,830.00

Amount Without GST (DSR Amount/ 1.12 & Non DSR/ 1.18) 84,62,640 1,36,25,458

Amount w/o GST 2,20,88,098

Grand Total including GST (@18%) 2,60,63,956

Grand Total including GST (@18%) 2,60,63,956

Buy back credit of old furniture as per list enclosed (Minimum

reserve price Rs. 3,25,100.00)

1 Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

1 FLOORING WORKS

Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of

centring and shuttering-all work upto plinth level.

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 36.75 Cum 6326.05 232482.34

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required

pattern in linear portion of the building all complete as per architectural drawings, with 18 mm

thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

1.02 11.51 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement

slurry admixed with pigment to match the marble shade including rubbing, curing and polishing

etc. all complete as specified and as directed by the Engineer-in-Charge.

11.51.1 18 mm thick Italian Marble stone slab in all colour and shade 25 Sqm 6095.50 152387.50

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints

1.03 11.41A with white cement and matching pigments etc. The tiles must be cut with the zero chipping

diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of

required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Supply of 100 mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish.

1.04 MR Thichness 1.30 to 1.50 mm. Designed to conceal screws. Seamless finish. Complete with 225 Rmt 280.75 63168.47

Rubber/ PVC Jointers and Gasket.

Providing and Fixing Lam Parke, Elegance Laminate Flooring Size 1195mm x 1545mm x 12mm,

AC5 Class 33, Abrasion Classes, average abrasian Value > 6000, use in Heavy Traffic, 6 plank

per pkg, 1.3551 sq.mtr./box, total weight per box 14.60 kgs , Heavy traffic use , Fast and Easy

1.05 MR Assembly, Resistant to UV rays , Environmentally Friendly, Resistantto Furniture wheel Abrasion, 350 Sqm 3568.00 1248800.00

High Density Fiberboard, Maintained And Hygenic, Resistant to Point Strikes, Not Affected by

Stains, Resistant to Scratch, Bfl-S1

TOTAL FLOORING WORKS 666279.84 1311968.47

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

2 FALSE CEILING WORKS

Providing and fixing false ceiling at all height including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x

1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to

the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size

and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of

80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made

out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels

0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed

to wall/partition with the help of rawl plugs

at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25

mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of

the board with recommended jointing compound , jointing tapes , finishing with jointing compound

in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board,

all as per manufacturer's specification and also including the cost of making openings for light

fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete

as per drawings, specification and direction of the Engineer in Charge but excluding the cost of

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board

12.45.1 with BIS certification marks) 350 Sqm 1145.95 401082.50

OPEN CELL The Ceiling suspension system shall be exposed Lay-in system to fit 600mm x

600mm ceiling module. Cell size will be 100 mm x 100 mm. It shall be suspended to the soffit by

4mm diameter adjustable quick fit hanger rod system. Main tee shall be 32mm height exposed

portion shall (Polyster Coated) be 15mm. Cross tees shall be 26 mm height and exposed portion

is 15mm.All system components are made of roll formed hot dipped galvanized steel of 0.50mm

2.02 MR thickness with a minimum tensile strength of 240 mpa.Both ends of main tee have integral splices 100 Sqm 3949.30 394930.17

which can be enjoyed firmly be inserting a tab on the one end of one section into slot in the

adjoining section. Open cell ceiling system is consisting of 60 microns powder coating of

polyester paint. Main and cross runners of open cell interlock with each other and comes in

dimension of 595 mm x 595 mm, which lay-in the frame of 15 mm tee grid .

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Supply & installationof fabric false ceiling / wall formed out with TRANSLUCENT Printed fabric

coverings made out of polyester knitted fabric coated with Polyurethane (PU). The

TRANSLUCENT Printed fabric width of 2m, 3m, 4.1m &5.1m with weight of 200gm/m2, thickness

of 0, 3 mm. The appearance of fabric is matt, smooth and uniform with blanq color and light

transmission of 50%. The tear strength of fabric should be accordance to CH: 4,5daN; TR: 6,5

daN. The fire rating should be accordance to B-S1, d0. The fabric should be humidity resistant

and free of carcinogenic substances(CMR) or volatile organic Compounds (VOC’s). At labeling in

accordance with the French decree no. 2011- 321, Oeko-Tex standard100 certified. Fabric should

be installed with approved manufacturer guidelines. It comes with 10- year manufacturer

guarantee. The installation of TRANSLUCENT Printed fabric should be dry installation & done at

room temperature using PVC, ABS Grippers. Clipso ceiling base to be made of MS or Wooden

frame finishing to a flush finish of tapered and square edges in desired design as per architect

specification.Supply of LED Lights behind the Fabric Wall/ False ceiling in modules/ PCB with

recommended wattage as per manufacturer's standards to give an effect of ambient lighting. LED

spacing / Pitch should be atleast 73 -80mm with beam angle of 170 degree, Colour temperature

shoud be as per design intent 3000K/4000K/6000K. Wattage of 8-10W/mtr. LED modules/ PCB

should be positioned properly to provide an even light flow, casting noshadows or dark spots.

LED Driver Cost included.

Providing & fixing of WoodWorks Grille with backer made of compressed natural bamboo using

lamination process with 24mm Prelude 43 black exposed grid in Carbonized shade.The Grille

panels shall be made of rapidly renewable natural bamboo core having density 600+Kgs/m3 as

per BS EN323 (1993) and bending strength of 96+ N/mm2 as per BS EN310 (1993). The Grille

panel shall have a seven layer UV coating of thickness 0.09-0.11mm as per BS EN71 finished to

2.04 MR natural or carbonized shades. The Grille panel shall be of nominal size 35x300x2400mm 35 Sqm 12251.29 428795.09

comprising 8 blades/slats of 35x16x2376mm with centre to centre spacing of 37.5mm fixed

through Backer of size 12x22x300mm having centre to centre spacing of 300mm and additional

end backers at 150mm from both the edges. Ledger of 6.5x24x2400mm shall be used for

covering face of wall angle. Open edges shall be covered using Edge Caps of 44x19x2400mm

and Blade Junction of 66x38x2400mm shall be used along the connection of two Grille panels..

The Grille panel shall have a fire performance of Class B according to EN13501-1. The Grille

TOTAL FALSE CEILING WORKS 401082.50 956034.26

3 WALL FINISHES WORKS

Supply and installation of Aluminium Framed Glass Partition for Access and Cabin System for

minimal frame, room dividing solutions.Single glazed mullion free demountable glass partition

using Toughened/ Laminated glass in proprietary natural anodised/Black aluminium sections

ALT 50 of size 50mm x 30mm with Concealed sealing (No visible Gaskets/Seals) with acoustic

rating of Minimum 32 db with third party test certificate. The profile will have Carpert Groove at the

Bottom on both sides for accomodating max. 8mm carpets. THe Glass to be fixed with help of

3.01 MR Proprietary Stability GRIPPER Clamp to have a stable system. It should consists of intermediate 100 Sqm 5294.00 529400.00

slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction

profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to provide

clutter free view at both side of section. The Glass to be Offset mounted towards outer edge

leading to minimum aluminium frame on one side. Optional Profile Bottom Seal pair for additional

accoustic. Glass thickness - 10 (LSG).shall be included in the product.

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

3.02 9.1 framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length

(hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood 1 Cum 131576.95 131576.95

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative

type, core of block board construction with frame of 1st class hard wood and well matched

3.03 9.21 commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 6.5 Sqm 2015.75 13102.38

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges

of flush door shutters (over all area of door shutter to be measured).

Providing and Fixing 22X922 mm Dtype Handle for wooden doors Material : Stainless Steel.

3.05 MR Finish : Satin Stainless Steel (SSS). of approved make and model all complete as per the 6 Each 8379.00 50273.99

direction of Engineer-in-charge.

Providing and Fixing SS Mortise Lock Body SB/TB for door thickness 25-50 mm for wooden

3.06 MR doors of approved make and model all complete as per the direction of Engineer-in-charge. 3 Each 877.80 2633.39

Providing and Fixing 22X922 mm Dtype Handle l : Stainless Steel.Finish : Satin Stainless Steel

(SSS). of approved make and model all complete as per the direction of Engineer-in-charge.

Providing and Fixing 60 mm SS Cylinder One side knob and one side regular key (3 key) for

3.08 MR wooden doors of approved make and model all complete as per the direction of Engineer-in- 3 Each 782.04 2346.11

Providing and Fixing - Double cylender Floor Spring with Top-Bottom Patch,pivot and Bottom

Patch Lock Maximum door weight 100 Kg. Maximum door width 1000 mm.Closing speed :

120°,Final closing speed : 15-0°. Hold Open (standard): 90° hold open.Suitable for 10-12 mm

3.09 MR glass Weight of floor spring approx : 6kg 5 Years Warranty against manufacturing defect with 16 Each 9791.23 156659.66

5,00,000 cycles Tested approved make and model all complete as per the direction of Engineer-

Providing and fixing 10 mm thick frameless toughened glass door shutter of approved brand and

manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor

3.10 MR spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all 50 Sqm 2516.37 125818.62

complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect

film to reproduce Sand-blasting effect on glass with customised designs, thickness of 2 mil

(0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum tensile strength of 3.5

pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4

3.11 MR pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to 65 Sqm 2417.91 157164.22

direct sunlight) to 15yrs (indoors) must be endorsed by 3M India Limited Architectural Market

Department. Contractors payment wouldn't be released until & unless he/she produces orginal

warranty certificate from the manufacturer.

Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of approved color by

Architect/ Client / Customer, fixed with compatible neutral grade silicon on a perfectly levelled

12mm thick water proof marine plywood / MDF / Mineral fibre board which is mounted on RCC

wall/any other structure. Lacquered glass must be made industrially (using curtain coating

process); opaque (if viewed against a support wall), uniformly coated with PU lacquer (50 micron

3.12 MR thick coating or more); panel to panel colour consistency (measured by photo spectrometer); 50 Sqm 4771.14 238557.04

highly durable (passes hardness test for minimum 220 oscillations); humidity resistance

(conforms to BS EN 1036 1999 or equivalent) ; environmentally friendly having Low VOC (no

lead, no arsenic, no copper, no formaldehyde), low VOC content <100g/l. Silicone used should

not react with lacquer coating (compatible neutral cure silicon)

Providing and fixing partition upto ceiling height consisting of G.I. frameand required board,

including providing and fixing of frame work made of special section power pressed/ roll form G.I.

sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling

channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and

ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm

length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide

having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within

flanges of floor and ceiling channel and placed ata spacing of 610 mm centre to centre by 6 mm

dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with

9.105 suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre,

3.13 and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and

ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the

frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9

mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards,

fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush

finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25

mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacturer’s

specification and direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced

Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks)

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab &

celling, cladded with Acrylic Solid Surface 12mm thick sheets straight fabricated on a single face,

finished in matte finish, pasted with industrial grade silicon on a robust substrate. Substrate shall

be with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per structural requirement & duly

3.14 MR painted with anti-rust red oxide coating and covered with 12 mm thick water proof ply as per the 40 Sqm 13097.11 523884.57

design and dimensions approved. The proposal includes the cost of preparing appropriate

substrate surface over the civil structure provided, along with material cost & installation / fixing

on straight walls etc. FOR ALL WALL CLADDING, TABLE TOPS ETC. COMPLETE

Providing & supplying of Window Blinds as per the approved sample in required shade and style

consisting, of Roller Blinds comprising of optima screen Fabric comprising of 22% polyester, 78%

PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67 mm, Yarn count 18-19/cm, having

fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .The tear resistance should be

complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for

quick, easy and safe installation, moulded plastic with steel spring support and inserted into the

tube end. It shall be driven by a ball chain pulley with ball chain and can be positioned at right

side or left hand side of the Shade.The Shade whenlowering or raising, shall be automatically

locked in position upon release of the ball chain by means of a built in friction lock. Universal

clutch for left and right hand operation.Chain Gear Ratio of 1.75:1.The END PLUG shall be

molded of plastic witha steel location pin.The plug shall be inserted into the tube end.(Opposite to

3.15 MR the Drive Unit) for ease of installation. The SUPPORT BRACKETS shall be of coated steel & 125 Sqm 3021.66 377707.26

provided with covers and used in right hand or left handpositions differentiated by the acceptance

of the of the rectangular drive unit support or the round idler plug pin.Can beinstalled (a) On Face

(b) Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be protruding outside

maximum of80mm. The ROLLER TUBE shall be of extruded aluminum with 37mm internal

diameter & skin thickness of 1mm and shall incorporate a key way integral with the tube to

accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated

steel. The BALLCHAINshall be 2mm diameter cord with 4.5mm diameter acetal balls moulded co-

axially to it on 6mm pitch to form an endless ball chain.It is used for raising or lowering action of

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line

3.16 MR with external glazing as per details of Architect. Rate to include finishing exposed surfaces of the 70 RM 1746.29 122240.41

Pelmet with enamel paint of approved shade or 1mm laminate.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

3.17 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 10 Sqm 1018.05 10180.50

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half

13.4 12 mm cement plaster of mix :

13.4.1 1:4 (1 cement: 4 coarse sand) 10 Sqm 307.25 3072.50

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare

the surface even and smooth complete.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even

13.60.1 Two or more coats on new work 300 Sqm 137.85 41355.00

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of

9.140 approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of

3.22 Engineer-in-Charge

9.140.1 12mm thick MDF Board 650 Sqm 1084.60 704990.00

Providing and fixing metal system up to ceiling height, which includes frame work made of

special section power pressed/ roll form G.I. sheet with zinc coating of 120 GSM, consisting of U

track 52mm wide having equal flanges of 30mm and 0.55mm thick (Base metal thickness)

fastened to the floor slab and ceiling soffit using rawl plugs with screw at 600mm centers, with

3.23 MR first & last fixing point at not greater than 50 mm from either end. Boral C studs 50mm wide 650 Sqm 1001.66 651081.44

having one flange of 34mm, other flange 36mm, lip size 6 mm and 0.55mm thick installed

perpendicularly within the flanges of floor and ceiling channels located directly opposite to each

other at not more than 610mm centers. Maintain 5 to 10mm gap between C Stud and web of U

Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss/ matt/

3.24 9.127 suede finish with high density protective surface layer and reverse side of adhesive bonding 350 Sqm 890.55 311692.50

quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS:

8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall

3.25 12.57 with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as 350 Sqm 307.35 107572.50

per directions of Engineer-in-Charge.

TOTAL WALL FINISHING WORKS 1367254.93 3205894.63

4 MISCELLANEOUS WORKS

Modular kitchen - Under counter storage cabinets:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet

boxes with openable shutters and sufficient number of drawers made of 18 mm thk. ISI Marked

comm. ply , all ply to be laminated with 0.8 mm laminate.All shelves should be supported on

approved quality SS pins and shall be adjustable for different heights as per

requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides

with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of

approved. The cabinet boxes of floor units will be supported by 100mm height vertical adjustable

legs which will be covered with PVC skirting in brushed aluminum finish attached by hardware of

skirting. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and

rawl plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be

considered for measurement and payment. Cabinet boxes size would be varies from

400X560X710MM to 1000X560X710MM (approx.) and join together as per site requirements etc.

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Modular Kitchen - Overhead storage wall units:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet

boxes with openable shutters and sufficient number of drawers made of 18 mm thk. ISI Marked

comm. ply. All ply to be laminated with 0.8 mm laminate.All shelves should be supported on

approved quality SS pins and shall be adjustable for different heights as per

requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides

with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of

approved. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and

raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be

considered for measurement and payment. Cabinet boxes size would be varies from

400X560X710MM to 1000X560X710MM (approx.) and join together as per site requirements etc.

4.02A MR Providing and fixing with metal sides and quadro channels 7 Each 3477.80 24344.62

4.02B MR Providing and fixing baskets 7 Each 3932.81 27529.65

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed

portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4

kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions

including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement

4.04 22.3 plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended 25 Sqm 774.25 19356.25

proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of

applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400

micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to

each other with bitumen @ 1.7 kg/sqm).

Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in

height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash

extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made

from roll forming process of required length (shape & size according to uPVC profile), appropriate

dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline

sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on

one side of extreme panel along with zinc plated mild steel multi point locking having transmission

gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh

panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing

4.05 9.147E capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and

necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion

welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather

proof silicon sealent over backer rod of required size and of approved quality, all complete as per

approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes wire mesh and

silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be

accepted but no extra payment on this account shall be made.

Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm

9.147E.1 both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of 125 sq m 7798.30 974787.50

appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm.)

TOTAL MISCELLANEOUS WORKS 994143.75 302827.08

6 HORTICULTURE AND LANDSCAPING WORKS

Digitally signed by AMIT

10 AMIT SINGH

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Areca palm having ht. 1.50 m to 1.80 m with 6 to 8 suckers, well developed, fresh and healthy

with lush green foliage in 25 cm size of Earthen pot / Plastic pot.

Rhapis Palm having ht. 45 cm to 60 cm with 5 to 7 suckers, well developed, full of fresh and

healthy leaves in 25 cm size of Earthen pot / Plastic pot.

Providing and displaying of Money Broad Leaves mounted on moss stick 90 cm ht., 3 to 4 s in

each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm

6.03 3.59 Bottom dia x 25 cm Perpendicular height Earthen pot/Plastic pot. & as per direction of the officer- 20 Each 184.50 3690.00

Providing and displaying of Seaforthia Palm having ht. 90 cm to 1.20 m with 6-8 suckers, well

6.04 3.81 developed, fresh and healthy lush green leaves from bottom to top in 20 cm size of Earthen 20 Each 358.75 7175.00

pot/Plastic pot & as per direction of the officer-in-charge.

Supply of full soil fill conical shaped planters of specified volume and dimensions in stone finish

or equivalent. planters to be indigenously made by rotational moulding, with homogeneous

recyclable, industrial grade polymer-resin mix, and textured surface. planters should have an

integrated water outlet hole & plug, single layered peel-proof construction, light weight, rust proof,

uv stabilized, anti-frost feature without any joints, and easy to clean. planter supplier must give 1

MR year warranty against any fading or cracking for both indoor and outdoor use. green plant and

laying is extra. potting instructions as per company catalogue.

TOTAL LANDSCAPE WORKS 31115.00

Company name Logo cut in SS brush 3d letter (SS304) of text ht. 600 and of deph 1.5" font to

7.01 MR be cut to sizes and directly installed on available base as per with approved SS fixtures,

including necessary hardware, substructure, extra, as specified and directed by Engineer in 16 Nos. 5489.00 87824.00

charge. The letters shall be back lit.

Providing making and fixing in position custom made SS siganges of sizes 16"x5"as per

7.02 MR Architectural drawings and instruction with approved SS fixtures, approved base including

necessary hardware, substructure extra complete as per detail drawing, as specified and directed 16 Nos. 916.39 14662.30

by Engineer in charge

TOTAL SIGNAGES 102486.30

8 DISMANTLING WORKS

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within

50 metres lead.

15.23.2 For thickness of tiles above 25 mm and up to 40 mm 490.00 SQM 93.40 45766.00

MR Based on item Dismantling tile work in Wall dado laid in cement mortar including stacking material within 50

No 15.23 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including

disposal of rubbish to the dumping ground within 50 metres lead.

Digitally signed by AMIT

11 AMIT SINGH

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Demolishing brick work manually / by mechanical means including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-

15.7.4 in-Charge.

In cement mortar 2.00 CUM 1698.45 3396.90

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,

architrave, holdfasts etc. complete and stacking within 50 metres lead:

15.12.1 Of area 3 sq. metres and below 2.00 EACH 302.70 605.40

15.12.2 Of area beyond 3 sq. metres 2.00 EACH 414.55 829.10

Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling

8.06 15.57 including disposal of unserviceable surplus material and stacking of serviceable material with in 1,070.00 SQM 46.50 49755.00

50 meters lead as directed by Engineer-in-Charge.

Demolishing cement concrete manually / by mechanical means including disposal of material

within 50 metres lead as per direction of Engineer-in - charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 2.00 CUM 2007.50 4015.00

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes,

8.08 15.45 manually / by mechanical means breaking lead caulked joints, melting of lead and making into

blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-

Up to 150 mm diameter

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out

8.09 15.44 the pipes, manually / by mechanical means including stacking of pipes within 50 metres lead as

per direction of Engineer-in-Charge:

Dismantling of flushing cistern of all types (C.I. /PVC/Vitrous China) including stacking of useful

materials near the site and disposal of unserviceable materials within 50 metres lead.

MR Based on item Dismantling of Wash basins, Urinals, WC including stacking of useful material near the site and

No 15.52 disposal of unservicable materials within 50 metres lead

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and

disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.

Extra for cutting reinforcement bars manually / by mechanical means in R.C.C. or R.B. work

8.14 15.5 (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of 5.00 sqm 947.10 4735.50

Engineer - in -charge.

8.15 15.6 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. 10.00 kg 7.45 74.50

1.1 Carriage of material by mechanical transport including loading unloading and stacking

8.16 1.1.1 Lime, murrum, building rubbish

Dismantling Doors, windows and clerestory windows (steel or wood) shutter including chowkhats,

architrave, holdfast etc. complete and stacking within 50 meters lead

15.12.2 Of area beyond 3 sqm meters 55.00 Each 414.55 22800.25

TOTAL DISMANTLING WORKS 197471.95 3778.74

Digitally signed by AMIT

12 AMIT SINGH

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES - HVAC WORKS

2019/DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2019/DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

1 1 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C per HP 50 16415.00 820750.00

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER

not less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

2 2 single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree

CWB temperature.

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T"

3 4 Joints i.e. Refnet Joints/Header with Insulation for refrigearnt piping

4 5 Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

complete with fittings, with suitable adjustable ring type hanger supports, jointing/ brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

4.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation metre 150 245.00 36750.00

4.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation metre 180 331.00 59580.00

4.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation metre 100 466.00 46600.00

4.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation metre 180 588.00 105840.00

4.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation metre 50 707.00 35350.00

4.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation metre 50 865.00 43250.00

4.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation metre 25 1022.00 25550.00

4.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation metre 25 1108.00 27700.00

5 6 Cable/ Wiring

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC

conduit as required.

7 8 Drain Piping

Supply, installation, testing and commissioning of PVC drain water with necessary clamps,

fittings such as bends tees etc. and duly insulated.

MR 40 mm dia (9 mm tick ins.) metre 660 367.00 242220.00

Total HVAC WORKS 2116525.00 451375.05

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

DSR NO TOTAL AMOUNT TOTAL AMOUNT

DSR NO TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE

2021 DSR (INR) NON-DSR (INR)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

17.10 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting

and making good the walls wherever required :

17.10.1 Kitchen Sink with Drain Board

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28 complete.

17.28.2 Flexible pipe

17.34 Providing and fixing toilet paper holder :

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

18.53 quality conforming to IS : 8931

18.53.1 15 mm nominal bore Each 10 500.35 5003.50

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse

17.61 sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and

pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 Cutting holes upto 30 X 30 cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks Each 1 362.40 362.40

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching M 1

7 18.78 surface after housing G.I. pipe etc. 171.80 171.80

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the

18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 20mm nominal outer dia pipes M 10 325.10 3251.00

18.7.3 25mm nominal outer dia pipes M 20 408.55 8171.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe

with clamps at 1.00 m spacing.

18.8 This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete as per direction

of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes M 5 441.15 2205.75

18.8.2 20mm nominal outer dia pipes M 5 513.75 2568.75

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

18.51 standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore Each 1 708.40 708.40

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for

soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

MR including chase cutting as required, excavation and back filling in all kind of soils, suspended

from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.

alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) including cost of shuttering for proper completion of the work, breaking and

making good the walls and floors etc. after pipes have been duly laid and tested. The rubber

ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on

50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes

MR commissioning of all pipes lines as per drawings and specifications and as directed by engg-

in-charge at site.

MR 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 20.00 361.00 7220.00

MR 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 5.00 361.00 1805.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6

Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,

MR enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by

12 clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

complete in all respects.

14 MR Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser each 2 346.00 692.00

15 MR Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. each 2 705.00 1410.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round

16 MR cover with screws and other required fitting complete as required. 563.00 1126.00

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

1 1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

2 1.55 surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single

3 1.5 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 4080 433.00 1766640.00

PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single

4 1.6 core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS Metre 20 662.00 13240.00

PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

5 1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 250 122.00 30500.00

1.24.5 6 pin 15/16 amp socket outlet Each 24 197.00 4728.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

6 1.26 excluding modular plate as required. Each 50 40.00 2000.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

7 1.27 existing modular metal boxes etc. as required.

15 Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

B.1 1.14 insulated copper conductor, single core cable in surface/ recessed steel conduit as required

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 20 233.00 4660.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 5 334.00 1670.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 5 439.00 2195.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 90 1005.00 90450.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 60 1365.00 81900.00

Supplying and making end termination with brass compression gland and aluminium lugs for

C.1 9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

C.2 MR Conductor Cables :

Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

a) 3.5 C x 120 Sqmm XLPE cable RM 20 857.00 17140.00

b) 3.5 C x 95 Sqmm XLPE cable RM 10 685.00 6850.00

c) 3.5 C x 70 Sqmm XLPE cable RM 10 568.00 5680.00

d) 3.5 C x 50 Sqmm XLPE cable RM 10 417.00 4170.00

e) 3.5 C x 35 Sqmm XLPE cable RM 10 659.00 6590.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

16 Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

D.2 2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, vertical type three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral

D.3 2.5 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/RCCB/Isolator)

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

D.4 2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

1.24.7 TV socket outlet Set 13 148.00 1924.00

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

E.1 MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Mtr 12 3531.00 42372.00

(b) 225mmx38mm(GI) - 3 compartment Mtr 50 2901.00 145050.00

17 Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

at the intersection of raceways supplied completely with base and cover plates, height

E.2 MR adjustable junction box 65- 90 mm including all accessories complete in all respect as per the

directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.3 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Meter 390 47.00 18330.00

exisitng surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

E.4 1.21 surface/ recess including cutting the wall and making good the same incase of recessed

conduit as required

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe SET 4 13838.00 55352.00

of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 200 70.00 14000.00

G PANEL BOARDS

G.1 MR Floor Panels

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium Each 1 196021.00 196021.00

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

18 Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 200 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 250 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross

section, size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -2 Nos.

(b) 40 Amps, TPN, MCB - 6 nos

(c ) 100 Amps TPN MCB - 1 nos

Panel complete as above

G.2 MR HVAC Panel

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, outdoor type double door with canopy TPN Panels with

hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4

wire 50Hz AC supply with rear access for cable alley and with segregated bus-bar chamber Each 1 117612.00 117612.00

with tinned aluminium bus bar and including supplying and fixing following switchgears,

meters and accessories, inter-connections, bonding to earth, powder coated painting and

marking as specified. Switch boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

One (1) nos, 100 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault

breaking capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

19 Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/ SMC bus bars supports at required intervals complete for cross

section, size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB - 2 nos

(b ) 40 Amps, TPN MCB - 4 nos

Panel complete as above

H SAFETY ITEMS

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2

H.1 2.21 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour Nos. 4 269.00 1076.00

on front side as required

Providing and fixing HT danger notice plate of 250mm x 200mm made of mild steel, atleast 2

H.2 2.22 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour Nos. 2 292.00 584.00

on front side as required

Supply, Installation, Testing and Commissiong of High Efficient 15 kVA Model IGBT Rectifier

& IGBT Inverter, Modular Fault Tolerant design Failure in any one of the module the others

keeps supplying to the load without interruption. Approved Make, 12V VRLA Batteries, 65 AH

I.1 MR or saiuitable for 30 minutes backup. (10 nos on each bank) , Accessories ( Cabling between SET 1 599741.00 599741.00

UPS and the Battery upto 10 Mtr distance for each UPS considering cable Routing,Battery

Rack and Battery Interlinks, lugs etc) min VAH of 15600 ,DC MCCB between UPS and

Battery complete in all respect as per the directions of engineer in charge. UPS shall produce

30 minutes backup.

Total of Electrical items 2889259.00 1651952.00

20 Digitally signed by AMIT

SINGH 17:50:17 IST

S NO Description UOM Qty Rate DSR Amount Non-DSR Amount

A. UTP Components for Data

1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing

surface/recessed steel/PVC conduit as required.

2 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Work Station end. Keystone Unshielded Outlet, 180DG C6, Blue

3 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Rack Side end Redantant . Keystone Unshielded Outlet, 180DG C6,

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity.High Speed Gigabit 24AWG 108 392.00 42336.00

U/UTP Patch Cord Blue, LSZH, C6, 2M Nos.

5 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Rack end), High Speed 108 931.00 100548.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M Nos.

6 Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Data Active

B UTP Components for VOICE

7 Supply , Installtion , Testing and Comissioning of 4 Port British Style Shuttered

Face Plate white for I/O fixing at user side

Total : A - UTP Components 246240.00 276240.00

B 200 Pair MDF Box

8 200 Pair MDF Box with mounting Frame 1 17152.00 17152.00

9 10 Pair Krone Module 6 882.00 5292.00

10 25 Pair Riser Cable 35 1228.00 42980.00

Total : B - MDF Box 0 65424.00

GRAND TOTAL A+B 246240.00 341664.00

GRAND TOTAL A+B 246240.00 341664.00

S No Description UOM Qty Rate Amount

A. Active Component for Data

Supply, Installation, Testing & Commissioning of Switch with at least 24 X

10/100/1000BASE-T Ports and 2 x 10G Base-T and 4 X SFP+ Ports, Switching

capacity should be 168 Gbps, Switch should support 16 L3 IP interfaces, ACL, QOS,

VRRPv3, Equal-Cost Multi-Path (ECMP) , UDP helper, Policy-based Route (PBR),

802.1x, Embedded 6 kV surge protection on ethernet ports, Switch should have

1 console port, RJ45 Management Port and USB port, Should support internal/external Nos. 3 161196.00 483588.00

redudent power supply for 1+1 redundancy and load sharing. Certification: CE, FCC,

BSMI, CB and UL. OEM should available in Gartner Magic Quadrant for Wired and

Wireless LAN Access Infrastructure Report from latest last three consecutive year.

Supply, Installation, Testing & Commissioning of Switch with at least 24 X

10/100/1000BASE-T POE+ Ports and 2 x 10G Base-T and 4 X SFP+ Ports,

Switching capacity should be 168 Gbps, Switch should support 16 L3 IP interfaces,

ACL, QOS, VRRPv3, Equal-Cost Multi-Path (ECMP) , UDP helper, Policy-based

Route (PBR), 802.1x, Embedded 6 kV surge protection on ethernet ports, Switch

2 should have console port, RJ45 Management Port and USB port, Should support Nos. 1 167913.00 167913.00

internal/external redudent power supply for 1+1 redundancy and load sharing.

Certification: CE, FCC, BSMI, CB and UL. OEM should available in Gartner Magic

Quadrant for Wired and Wireless LAN Access Infrastructure Report from latest last

three consecutive year.

3 Supply, Installation, Testing & Commissioning of Modules 10G. Nos. 3 23508.00 70524.00

Supplying, installing, testing and commissioning of Cabinet. Size 24U (800 X 800 mm)

(WXD) following accessories, Width (mm) 800, Depth (mm) 800, Approx.Net Wt (kg)

75, CRCA 'D' Grade thickness (mm) 1.2, RAL 9017(Matt Black), Glass: 4mm

Toughened Tinted Glass Door,Injected one piece polyurethane gasket on frame,

Accessories: Cooling Fan (230V A/C 90 CFM) - 4 Nos, Cable Manager Metal- 4

Nos,PDU 230VAC - 1 No (12 nos. 6A/16A sockets with plugs 6A/16A - 1/1pc & MCB

4 16A/32A -0/1 Pc), cable channel 100mm wide 24U- 2 Nos,Heavy Duty Stationary EACH 2 37784.00 75568.00

shelf M6 screws,washer,cage nuts (nickel coated))3 Nos. Earthling Strips 150mm H -

1 No, Door Lock - 1 No, Castor Wheels (with Brake) - 2 Nos, Castor Wheels (without

Brake) - 2 Nos, Front Metal Band - 1 No. Packing: 5 ply cardboard & Inside 28 ply EP

foam. In the rack there must be maintained 1 U = 1.75 inches space. Nos. 1 etc

complete as required

Supply, Installation, Testing and Commissioning of All in One Desktop with wireless

keyboard and mouse- 12th Generation Intel® Core™ i5 processor

5 Windows 11 Home, 60.5 cm (23.8) diagonal FHD display, Intel® UHD Graphics 730, EACH 2 107499.00 214998.00

1 TB PCIe® NVMe™ M.2 SSD, 8 GB DDR4-3200 MHz RAM (1 x 8 GB) white color

complete in all respect as per the direction of engineer in charge

Supply, Installation, Testing and Commisioning of HDMI cable upto 10 meters

6 complete is all respect for connection between Laptop etc to Display in Meeting EACH 4 8731.00 34924.00

Rooms and other senior management rooms.

Supply, Installation, Testing and Commisioning of HDMI cable upto 6 meters

7 complete is all respect for connection between Laptop etc to Display in Meeting EACH 7 6045.00 42315.00

Rooms and other senior management rooms.

Total : A - Active Component for Data, Wifi 1089830.00

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Luminaire Description UOM QTY Rate TOTAL AMOUNT

S NO DSR/MR Luminaire Description UOM QTY Rate TOTAL AMOUNT

Supply, Installation, Testing and Commissioing of Recessed downlightwith

HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system

power: 12 W, Luminous flux of luminaire 1320 lm, 110 LM/W system efficacy,

Colour temperature of 4000 K, Neutral white, CRI > 80, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours; energy-efficient

LEDs, direct light emission, housing in die-cast aluminium, Polyester powder

1 MR white coloured coat applied over a 5-stage pre-treatment trim, prismatic no 54 1715.00 92610.00

diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW

SMOKE) wiring, Electronic control gear,

Protection class II, IP 40,

Supply, Installation, Testing and Commissioing of Modular

recessed/suspended luminaire with HPE (High Performance Efficiency) LED

(Light Emitting Diode), system power: 14W, Luminous flux of luminaire 1540

lm, 120 LM/W system efficacy, colour temperature of 4000 K, neutral white,

CRI > 80, 230V constant current driver, 70% of luminous flux after 50,000

operating hours, Energy efficient LEDs, Direct light emission, Luminaire profile

in aluminium, Polyester powder aluminium white coloured coat applied over a

5- stage pre-treatment, Snap fit satin diffuser for a homogenous light

distribution ZHLS(ZERO HALOGEN LOW SMOKE) internal wiring, integral

2 MR electronic control gear, no 54 3676.00 198504.00

Protection class I, IP 40, MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥ 88%,

surge protection of 2.5kV,

Supply, Installation, Testing and Commissioing of Recessed downlight

luminaire with HPE (High-Performance Efficiency) LED (Light Emitting Diode)

system power: 8 W, Luminous flux of luminaire 760 lm, Colour temperature of

4000 K, Neutral white, SDCM 3, CRI > 80, 230 V constant current driver, 70%

of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct

light emission, Luminaire housing in aluminium, Polyester powder-white

coloured coat applied over a 5- stage pre-treatment, Prismatic diffuser for

3 MR homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) no 51 1666.00 84966.00

wiring, electronic control gear,

Protection class II, IP 40

Supply, Installation, Testing and Commissioning of LED Strip Light of min 5 W

4 MR per meter with all accessories complete in all respect RMT 162 686.00 111132.00

TOTAL 487212.00

SCHEDULE OF QUANTITIES - FIRE ALARM

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal

17.2.4 1 detector complete with mounting base complete as required. No 32 2858.00 91456.00

Supplying, installation, testing & commissioning of response indicator on surface/ recessed MS

Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with

rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as

Supplying, installation, testing & commisssioning of intelligent addressable programmable

17.2.6 5 sounder complete as required. No 1 2651.00 2651.00

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

Supplying, installation, testing & commissioning of addressable manual call point complete as

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB,

17.3.1 8 MP3 player (including 6 zone button paging station) with seamless integration facility with main No 1 126411.00 126411.00

fire alarm panel for voice evacuation complete as required

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms

17.3.7 10 operating at 240 Volt AC Supply complete as required. NOS 1 145793.00 145793.00

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

17.5.2 11 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete Mtr. 192 173.00 33216.00

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

17.5.3 existing surface / recessed steel conduit of following pairs, cores and size including

12 connections and interconnections etc. as required.

17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 200 89.00 17800.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and

17.5.4 13 accessories like coupler etc. as required. Metre 200 53.00 10600.00

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

M.R. 14 backup complete as required. NOS 2 3793.00 7586.00

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with

17.3.9 15 microphone assembly complete as required. NOS 1 81756.00 81756.00

TOTAL FIRE ALARM WORKS 568006.00 7586.00

24 Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES - EPABX

S.NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S.NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

1 Supply Installation, Testing and Commissioning of Analog card

for 64 users connecting with existing EPABX and should be Nos 1 40299.00 40299.00

compatible in all respect as per the Direction of Engineer in

2 Supply Installation, Testing and Commissioning of Analog

Speaker Phone with backlight.

Total 193914.00

SCHEDULE OF QUANTITIES: FURNITURE

S No Area Item Description Qty Rate Amount Images

Providingin place of main table with overall size of table 2100 x 2250 x 750mm. The main

table shall be of size 2100 x 1050 x 750mm. The side unit shall be 1200 x 500 x 750mm. The

table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-

14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-

build power box are provided on work surface for wire management. The ERU top is made of

25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC

membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-

laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.

The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made

of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded

with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-

1 DC/JS Table laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX- 5 207901.84 1039509.20

BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer

extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are

provided for ease of opening. Pedestals are provided with lock for security.The Back Unit

shall be of dimensions 1800 x 500 x 1150mm. It shall be made of 25mm thick MDF – one

side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed

on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2

grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters

have a soft closing & anti slam mechanism. Handles are provided for ease of opening.

Storage is provided with lock for security.Complete all as per the direction of Engineer in

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES: FURNITURE

S No Area Item Description Qty Rate Amount Images

Providing and Placing High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 112.7 –

130.2 cm H x 43.1 – 53.1 cm Seat Height. The seat is cushioned seat made of injection

molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high

resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per

IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned

made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x

0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The

armrest top is molded from polyurethane and mounted on to a drop lift adjustable type

tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having

chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The

adjustable tilting mechanism is designed with following features : 360° revolving type, front-

pivot for tilt with feet resting on ground and continuous lumbar support ensuring more

DC/JS High comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter

back chair giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism

housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is

integrated in the seat through a sliding mechanism. Seat depth adjustment range is of

6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be

adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual

need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The

pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel

castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of

twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and

assembled to pedestal. Complete all as per the direction of Engineer in Charge.

Providing and Placing Visitors Chair with overall size of 60.9 W m x 64.2 D cm x 98.2 H cm x

44.8 Seat Height cm. The seat is cushioned seat made of injection molded plastic outer &

inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane

foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25%

compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam

DC/JS Mid with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered

3 with leatherette. The back size is 47.7 W cm x 76.4 D cm. The tubular frame is cantilever 21 19059.36 400246.56

type and made of Ø2.54±0.03cm x 0.2±0.016 cm thick SS 202 tube. The back connected to

frame through chrome plated high pressure die casted connector pipe.Complete all as per

the direction of Engineer in Charge.

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES: FURNITURE

S No Area Item Description Qty Rate Amount Images

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be

2060W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr

having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should

be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU

foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density

32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of

4 JS 3 str sofa 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as 2 52157.18 104314.36

per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos.

per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for

cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202)

tube & plate with plastic endcap.Complete all as per the direction of Engineer in Charge.

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be

860W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr

having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should

be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU

foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density

32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of

5 JS 1 str sofa 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as 3 32690.72 98072.16

per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos.

per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for

cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202)

tube & plate with plastic endcap.Complete all as per the direction of Engineer in Charge.

Providing & placing in position Centre Table.Glass shall be 10+/-0.3mm thick black tinted

toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure.

It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762.

JS Centre overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1

Table cm.Complete all as per the direction of Engineer in Charge.

Providing & placing in position Corner table.Glass shall be 10+/-0.3mm thick black tinted

toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure.

It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762.

JS Corner overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1

Table cm.Complete all as per the direction of Engineer in Charge.

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES: FURNITURE

S No Area Item Description Qty Rate Amount Images

Providing & placing in position Discussion table.The overall size of the wortop shall be

1000mm dia. x 740mm. Worktop shall be made from 25mm thick MDF one side prelaminate

board with 0.4mm PVC membrane pressed on to top and having chamfered edge. Soft

closing dual access flap provided for access to power supply and data cables. Made of

25mm thick MDF-one side pre-laminate board with 0.4mm PVC membrane pressed on to

top. Gromet provided for wire management. The Under-structure consists of an Inner Tube

Assembly with Top for Worktop Mounting and Base plate with levellers. The Top Plate is

made of 5mm thk hot rolled steel Plates (HR) (As per IS: 2062) & the bottom plate is made of

8mm thk hot rolled steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of

25.4mmx 25.4mm x 1.2mm thk round electric resistant welded tube (ERW)(As per IS:7138)

welded together using Tungsten inert gas welding. The whole structure is epoxy polyester

powder coated (DFT 40-60 microns). The product has a knock-down construction.Complete

all as per the direction of Engineer in Charge.

Providingin place of main table with overall size of table 1650 x 1650 x 750mm. The main

table shall be of size 1650 x 750 x 750mm. The side unit shall be 900 x 500 x 750mm. The

table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-

14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-

build power box are provided on work surface for wire management. The ERU top is made of

25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC

membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-

9 laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. 6 80996.38 485978.28

The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made

of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded

with matching 2 mm thick PVC lipping.Complete all as per the directon of Engineer in

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES: FURNITURE

S No Area Item Description Qty Rate Amount Images

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of

injection moulded glass filled nylon & upholstered using Micro mesh fabric with high tenacity

yarn with 28 density foam sandwich in lumbar area. Seat Size:- 47cm(w) × 51.5cm (D). Back

size- 45cm x 65.3cm. The HR polyurathene foam is moulded with density =45+/-2 kg/m cube

and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.0 ± 0.5cm which is provided in armrest structure. Fixed armrest top is PU

moulded over metal insert. It shall have Front pivot synchro mechanism with following

features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension

adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The

lumber support consists of polypropylene pad with mouled polyurathene foam & covered with

US/PS to JS polyester fabric. The height of lumber pad can be adjusted through two projecting knobs

Main Chair provided on the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height.

The pneumatic height adjustment has an adjustment stroke of 10cm. The pedestal is

injection moulded in black 30% glass filled nylon and fitted with 5nos. twin wheel castors.

The pedestal pitch diameter is 66cm. This shall come along a headrest assembly consisting

of polypropylene pad with lumbr support and covered with polyester fabric. Neckrest

assembly has an adjustment stroke of 4.2cm and otation adjustment stroke of 76 degrees.

The work shall be carried out as per guidance and instructions recieved from Engineer

Incharge. The product must be SCS Indoor Advantage Gold certified and BIFMA level 2

certified.Complete all as per the direction of Engineer in Charge.

Providing & placing in position Mid back chair.The seat is made up of 1.2± 0.1cm thk. Hot

pressed plywood. The back is made up of injection moulded glass filled nylon & upholstered

using Micro mesh fabric with high tenacity yarn with 28 density foam sandwich in lumbar

area. Seat Size:- 47cm(w) × 51.5cm (D). Back size- 45cm x 65.3cm. The HR polyurathene

foam is moulded with density =45+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for

25% compression. The armrest has an up=Down adjustment of 8.0 ± 0.5cm which is

provided in armrest structure. Fixed armrest top is PU moulded over metal insert. It shall

have Front pivot synchro mechanism with following features. 360 degree revolving type,

US/PS to JS Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock

11 Mid back feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with 12 15233.80 182805.60

Chair mouled polyurathene foam & covered with polyester fabric. The height of lumber pad can be

adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has

an adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an adjustment

stroke of 10cm. The pedestal is injection moulded in black 30% glass filled nylon and fitted

with 5nos. twin wheel castors. The pedestal pitch diameter is 66cm. The work shall be

carried out as per guidance and instructions recieved from Engineer Incharge. The product

must be SCS Indoor Advantage Gold certified and BIFMA level 2 certified.Complete all as

per the direction of Engineer in Charge.

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES: FURNITURE

S No Area Item Description Qty Rate Amount Images

Providing & placing in position meeting table.The overall size of the wortop shall be 3000mm

x 1150mm x 740mm. Worktop shall be made from 25mm thick MDF one side prelaminate

board with 0.4mm PVC membrane pressed on to top and having chamfered edge. Soft

closing dual access flap provided for access to power supply and data cables. The Under-

structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade

and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick

Meeting PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for

12 Room 10 improving the aesthetics.The product has a knock-down construction. A wire raiser made of 2 62386.60 124773.20

seater Table 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow

of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module

Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for

mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). The product must be UL Greenguard

certified.Complete all as per the direction of Engineer in Charge.

Providing & placing in position meeting room high back chair.The seat is made up of 1.2±

0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon

& upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D).

The HR polyurathene foam is moulded with density =55+/-2 kg/m cube and hardness 16± 2

kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.5 ±

0.5cm which is provided in armrest structure. Armrest top has an integrated layer of

thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured

top. It shall have Front pivot synchro mechanism with following features. 360 degree

Meeting revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking

13 Room high with anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of 1 15446.20 15446.20

back chair polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The

height of lumber pad can be adjusted through two projecting knobs provided on the rear side

of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard

certified. the work shall be carried out as per guidance and instructions recieved from

Engineer Incharge. This shall come along a headrest from same family. It shall be SCS IAQ

certified for Indoor Air Quality.Complete all as per the direction of Engineer in Charge.

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES: FURNITURE

S No Area Item Description Qty Rate Amount Images

Providing & placing in postion meeting room mid back chair.The seat is made up of 1.2±

0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon

& upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D).

The HR polyurathene foam is moulded with density =55+/-2 kg/m cube and hardness 16± 2

kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.5 ±

0.5cm which is provided in armrest structure. Armrest top has an integrated layer of

thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured

top. It shall have Front pivot synchro mechanism with following features. 360 degree

Meeting revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking

with anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of

back chair polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The

height of lumber pad can be adjusted through two projecting knobs provided on the rear side

of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard

certified. the work shall be carried out as per guidance and instructions recieved from

Engineer Incharge. It shall be SCS IAQ certified for Indoor Air Quality.Complete all as

per the direction of Engineer in Charge.

Providing and placing panel & tile based modular workstation, with partition thickness

as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. Tiles: The

tiles on the top most frame shall be glass writing board/ clear glass tile. Bottom tiles -

Plain metal/ fabric magnetic / fabric / laminated /prelam. The panel thickness comprises of

38mm (35 mm Minimum) thick paper honeycomb + 3mm MDF on each sides + 0.6mm

decorative laminate or fabric on both sides. The uprights and horizontals shall be made of

aluminium extrusion having average wall thickness of 1.2 mm & powder coated with

epoxy- polyester powder. Particle board framing is used on outer boundary of these blocks

as well as intermediately at certain locations forming conduit for passing cables.

Workstations These blocks are located in the mid segment of the panels and can be provided with

15 L shape 1500 cutouts for mounting switch boxes (above or below the worktops). Top tiles can be offered in 16 57230.00 915680.00

x 1500 variety of combinations. The fins along the depth shall be 22.8mm thick. Worksurface- out of

25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500mm W1 x

1500mm W2 x 600D x 750H. Brackets shall be made from 2mm thick CRCA steel.

Pedestals with legs - Nova pedestal flat metal front, free standing central locking of size

390 mm w x 435 mm d x 646 mm height 3dr = 2box+1file. The work shall be carried out as

per the instructions and guidance received from engineer incharge. The product must

be UL Greenguard, BIFMA Level 3 certified.Complete all as per the direction of Engineer in

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES: FURNITURE

S No Area Item Description Qty Rate Amount Images

Supplying and placing of Recta workstation of size 1200X 600 with KBPT + pedestal

:Providing and placing DESK based modular workstation with System ht - 750 mm

.Understructure - The slanted legs with perforated metal modesty in between are connected

to the understructure with the help of PDC Connectors to provide a stable and sturdy base

for the worktops. Modesty panel shall be of Metal 1.2 mm thick CRCA. Wire Management :

Metal powder coated power box with wire raiser+D56 is given to pull wires from the floor

Workstations junction box upto the power box fixed under neath the worktop. Aluminium access flaps on

1650x600 worktop above power box cut out for accessing switches.Worktop mounted metal modesty

made from 0.8 mm thk CRCA (IS: 513) is provided.Worksurface - out of 25 mm thk prelam

particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d.Pedestals -

Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435

mm d x 646 mm ht 3dr = 2box+1file. .The product should be GREENPRO, SCS IAQ, GRIHA,

BIFMA certified.

Providing & placing in position Workstation chair.The cushioned seat and back assembly

consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and

upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x

53.0cm H. The HR polyurethane foam used in seat and back cushion is moulded in density

45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered

in such a way that it gives a multi dimensional movement possibility just with a simple lean

on the sides or back, without need for complex manual adjusments. The cantilevered seat

offers impact cushioning while seating and synchronises with the back movement during

posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and

the spine connector moulded in glass filled Polyamide form the back spine structure involved

Workstation in multi dimensional recline motion. The variable tilt angle recline motion can be adjusted

Chair with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is user weight

dependent. The adjustable armrests assembly consists of armrest housing sliding over the

armrest structure, both moulded in glass filled Polyamide. The pneumatic height adjustment

shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and

fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm

with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The

seat height shall be (44.5-53.8cm). The product must be UL Greenguard gold certified and

BIFMA Level 2 certified.Complete all as per the direction of Engineer in Charge.

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES: FURNITURE

S No Area Item Description Qty Rate Amount Images

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be

2060W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr

having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should

be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU

foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density

Lounge/Rece 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of

18 ption 3 str 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as 3 52157.18 156471.54

sofa per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos.

per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for

cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202)

tube & plate with plastic endcap.Complete all as per the direction of Engineer in Charge.

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be

860W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr

having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should

be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU

foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density

32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of

19 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as 2 32690.72 65381.44

per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos.

per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for

cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202)

tube & plate with plastic endcap.Complete all as per the direction of Engineer in Charge.

Providing & placing in position Centre Table.Glass shall be 10+/-0.3mm thick black tinted

toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure.

Lounge/Rece It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762.

20 ption Centre overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 1 16562.48 16562.48

Table cm.Complete all as per the direction of Engineer in Charge.

Providing & placing in position Corner table.Glass shall be 10+/-0.3mm thick black tinted

toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure.

Lounge/Rece It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762.

21 ption Corner overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 6 11004.68 66028.08

Table cm.Complete all as per the direction of Engineer in Charge.

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES: FURNITURE

S No Area Item Description Qty Rate Amount Images

Construction: Rigid Knock Down construction made of 0.8 thk. CRCA Steel conforming to IS:

513 Gr.D. Each body block consists of 1 Main unit & then Add-on units (0, 1,2,3 depending

on no. of bays 1, 2, 3, 4 respectively). Each unit has 6 loading levels with 5 nos. adjustable

shelves for 2361 Height body. Front Cover, Back cover, is made of 0.8 thk. CRCA Steel

conforming to IS: 513 Gr.D. The front cover has a pattern of holes on the front surface for

ventilation purpose. Back panels when the entire optimizer layout is locked it also prevents

access to inside files from the outside in case of single body. Shared Panel, door frame is

made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Door Frame: The door frame

assembly is made of 2 vertical door stiffeners, a top horizontal stiffener and a bottom

horizontal stiffener. Optimizer Height for ground for 2361H body is 2502.5mm (2361 body +

80 understructure + 61.5 channel system). The bodies including shelves are given antirust

surface treatment & are coated with epoxy polyester powder. It involves an 8-step treatment

22 consisting of Hot water rinse, Knock of degreasing, degreasing, cold water rinse,

phosphating, cold water rinse, and passivation & dry off oven treatment. Final finish consists

of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of

minimum 40 microns. Shelf is made of 0.7 thk CRCA steel conforming to IS: 513 Gr.D or DD.

Its max load bearing capacity is 100 Kg uniformly distributed per shelf. In case of Push Pull

Understructure:- The Understructure is a welded frame suitably fabricated to bear the loads

Record Room based on configuration. The frame consists of the following parts: Main channel, body-fixing

Compactor channel, body-fixing angle and bearing-fixing angle. All the components are made of CRCA

sheet 2 mm thk conforming to IS:513. In case of Drive Type Understructure:- The

Understructure is a welded frame suitably fabricated to bear the loads based on

The frame consists of the following parts: Main channel, body-fixing channel, U-channel and

Z-channel. All the components are made of HR sheet 3 mm thk. conforming to IS:2062. The

hand wheel comprises of a welded metal frame which is then covered by PU using insert-

molding process. The metal frame is made of 3 mm thk. HR conforming to IS:2062. The

handwheel is connected to the rollers through a ‘Sprocket-Chain’ arrangement mounted on

the side of the body. Rail Channels (for Push-pull and Drive type with no platform): It

consists of ‘C’ section 2 mm thk HR sheet & Square 25.4mm X 2mm thk ERW tube – both

connected by screws. Prior to the grouting of the guide channels with the help of raul plug &

screw, ensure the ground is level. The size of one body shall be 1200mm x 400mm x

1981mm. The product must be UL Greenguard, Indoor Advantage Gold, Griha and Svagriha

and GreenPro certified.

Digitally signed by AMIT

SINGH 17:50:17 IST

SCHEDULE OF QUANTITIES: FURNITURE

S No Area Item Description Qty Rate Amount Images

Providing & placing in position of Single Sided Wood & Steel Book Rack .Side panels,

Frame & Cross L bracket are made using 0.8 mm CRCA (IS:513). The assembly consists of

2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are fixed in a shape of ‘X’ The tie

rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick.

CRCA IS:513 Grade. wooden panel of 25mm thk PLT, E1-P2 grade board for PLT approved

equivalent by engineer in charge, edges shall be provided with machine pressed 2 mm thick

PVC lipping glued with hot melt EVA glue.Under structure is made of 0.8m CRCA

(IS:513).Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513). Shelf panels are

placed on shelf support and then fixed using nut and bolts from below. Standard config.

consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on unit.

23 Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum. Completely Knock

down construction.All MS sheetmetal and metal frame components are powder coated with

epoxy polyester powder to the min thickness of min 45 microns.At the rear side of the

shelves back stiffeners are provided. These act as separators made of 0.8mm THK CRCA

(IS:513).Label Holder: It is an aluminum extrusion of length 296mm for single body bookrack

,fitted on to front of body. The Paper is 300GSM matt finish, to be inserted into the aluminum

extrusion. The length of paper is 296mm for single body bookrack.Company is ISO-

9001:2015,ISO-14001:2015,ISO-45001:2018,Greenguard(UL), BIFMA and AIOTA

certified.Product Certificates: Greenguard Gold (UL).Complete all as per the direction of

Engineer in Charge.

Single sided 3600mm(W)x300mm(D)x2078mm(H) 2 103441.16 206882.32

Digitally signed by AMIT

SINGH 17:50:17 IST

TOTAL SCRAP VALUE

S.N. PARTICULAR QTY

1 Split AC 3 6,800

2 Wall Fan 3 1,700

3 Exhaust Fan 2 900

4 Office Chair 17 6,500

5 Wooden Almirah 3 4,500

6 Office Table 10 10,000

7 Wooden Drawer 3 1,500

8 Iron Almirah 2 2,500

9 Hot case 1 400

12 Small Drawers 11 5,500

13 Small Stool 1 280

14 Wooden Door (7*3) 1 350

16 Water Dispenser 1 500

18 Refridgerator 1 1,400

1 Office Chair 5 2,100

2 Window AC 1 1,800

4 Big Table 1 1,200

5 Ceiling Fan 1 400

6 Wooden Almirah 1 1,500

1 Office Chair 3 1,200

2 Color Printer 1 1,500

3 Office Table 1 1,200

4 Wooden Almirah 1 1,300

5 Room Heater 3 1,500

6 Kattle 3 1,400

7 Photocopy Machine 1 1,500

8 Small Printer 2 2,300

9 Iron Almirah 1 1,500

1 Window AC 1 1,800

2 Iron Almirah BIG 1 1,500

3 Split AC 1 2,300

4 Sofa Big 1 1,800

5 Ceiling Fan 2 700

6 Office Chair 1 500

7 Hot case 1 400

8 Wooden Almirah 1 1,200

9 Iron Almirah (5*2.2) 1 1,000

10 Iron Almirah 1 1,200

11 Office Table 3 2,700

1 Office Chair 3 1,300

2 Office Table 2 1,800

3 Drawer 1 500

4 Split AC 5 11,300

5 Window AC 1 1,800

6 Cutter Machine 1 400

7 Printer 1 900

8 Room Heater 1 500

9 Air Purifier 1 1,200

10 Cooler 1 1,200

11 Split AC 7 15,800

12 Small Table 1 900

13 Glass Table 2 2,400

14 Small Table 1 500

15 Celing Fan 1 400

2 Office table Big 1 1,800

3 Computer table Small 2 700

4 Iron almirah 2 2,500

5 Window AC 1 1,800

6 Office Chair 1 500

7 Ceiling Fan 1 400

1 Office Table Big 1 1,200

2 Office Table Small 1 1,000

3 Ceiling Fan 1 400

4 Wooden Almirah Big (Two in One) 1 2,000

5 Window AC 1 1,800

6 Sofa Unit 1 1,500

1 Ceiling Fan 1 400

3 Office Table Big 1 1,500

4 Drawer 2 1,300

5 Iron Almirah BIG 1 1,800

6 Wooden Almirah 1 1,500

7 Office Chair 1 500

1 Window AC 1 1,800

2 Office Table 1 1,900

3 Drawer 1 500

4 Wooden Almirah Big 1 1,800

5 Wooden Almirah Small 1 1,200

6 Drawer 2 1,200

7 Wall Fan 1 600

1 Ceiling Fan 2 700

2 Window AC 1 1,800

3 Split AC 1 2,300

4 Office Chair 6 2,700

5 Sofa Set 1 1,700

6 Office Table Big 1 1,200

7 Office Table Small 2 1,000

8 Table Drawer 1 800

1 Sofa Set 2 2,700

2 Ceiling Fan 2 700

3 Window AC 1 1,800

4 Office Chair 8 3,600

5 Drawer small 1 600

6 Drawer Big 1 1,000

7 Office Table Big 1 1,500

8 Office Table Small 1 900

9 Wooden Almirah 2 2,400

1 Split AC (Kept in Room) 3 6,900

3 Iron Almirah (6 l * 2.5 b) 2 1,500

5 Office Table (4.5 l * 2.5 b) 1 1,000

Wooden Almirah attached with wall

7 Ceiling Fan 1 400

8 Wooden Almirah (7 l * 3.5 b) 1 1,500

9 Exhaust Fan (Kept in Room new) 1 450

10 Small Printer 1 800

1 Office Table (5.8 l * 3 b ) 1 1,200

2 Iron Almirah (6 l * 2.5 b) 1 1,500

3 Cooler 1 1,200

5 Ceiling Fan 1 400

Wooden Almirah attached with wall

Wooden Almirah attached with wall

1 Window AC 1 1,800

3 Chair 2 900

4 Ceiling Fan 1 400

5 Iron Almirah (6 l * 2.5 b ) 1 1,500

9 Stabilizer 1 450

10 Office Table (3.8 l * 2.2 b) 1 700

Wooden Almirah attached with wall

Wooden Almirah attached with wall

1 Ceiling AC 2 7,000

2 Wall Fan 4 2,400

Office Cubical 4 Compartment (8 l *

5 Office Table (4.5 l * 2.5 b) 2 2,000

6 Paper Shredder 1 900

7 Heater (1 Halozen+1 Oil) 2 1,000

8 Computer Table (3 l * 1.5 b ) 3 1,500

9 Monitor 1 1,200

10 Wooden Almirah (4 l * 4 b ) 1 1,000

Wooden Almirah attached all 4 side

of wall (4.5 l * 2 b )

13 Computer Table (3 l * 2 b) 2 1,100

14 Computer Table (4 l * 1.6 b) 1 550

15 Wooden Almirah (4 l * 3 b * 4 h ) 1 1,000

1 Ceiling AC 2 7,000

3 Wall Fan 3 1,800

4 Office Table ( 4.5 l * 2.5 l) 2 2,000

5 Iron Almirah (6 l * 2.5 b) 1 1,500

Office Cubical 4 Compartment (8 l *

9 Computer Table ( 3 l * 1.5 b ) 4 2,000

Wooden Almirah Attached with Wall (

Wooden Almirah Attached with Wall (

Wooden Almirah Attached with Wall (

Wooden Almirah Attached with Wall (

1 Window AC (VOLTAS + Lancer) 2 4,400

2 Computer Table ( 6 l * 4.5 b ) 3 4,500

3 Scanner Cum Printer Portable 1 1,500

5 Drawer 2 1,000

6 Document Rack 1 1,200

7 Iron Almirah 1 1,200

8 Server Cabinet 1 1,500

9 Office Table Curve Space ( 6 l * 3 b ) 1 1,200

Total Scrap Value (INR) 3,25,100