REPAIR AND PAINTING OF WOODEN FURNITURE AT MIL STN PATIALA UNDER GE (N) PATIALA

Amount

HAT STAND WITH MIRROR (DRG NO. FD-233):- M & L for carrying out repair/replacement of following parts of Hat Sstand with mirorr as per drawing after dismantling the old parts complete all as specified

S&F mirror shall be 5.5 mm thick standard quality ATUL/Saint Gobain duly electro copper plated on back shall be provided on the Black board.

S&F Teak board to be provided to the Hat stand.

S&F CP cap stand hoocks to be provided.

All exposed surfaces shall be french polished.

BED PLY WOOD TOP (DRG NO. FD-246) :- M & L for carrying out repair/replacement of following parts of Bed Ply Top as per drawing after dismantling the old parts complete all as specified

S & F Long rail made out of first class hard wood (Teak).

S & F Ply wood top made out of 12mm thick commercial ply wood of ISI marked .Make : National/Kitply

Teak Face Ply of Size 04mm Of Head Wing Board Make of Ply National/Kit Ply/Arched.

Teak Face Ply of Size 04mm Of foot Wing Board Make of Ply National/Kit Ply/Arched.

Cleaning and preparing old polished surface of Bed ply top and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE OFFICER'S WOODEN (DRG NO. DB-4114) :- S & F in replacement following parts to table office officer's , complete all as specified and shown on drgs after removing the old broken part.

S & F Top 5'x3' made out of 18mm thick prelaminated particle board exterior grade, Make : action tesa/arched/novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S&F drawer made of first class hard wood (teak) as per drg

S&F of lock as per drg

S&F of knob

Cleaning and preparing old polished surface of table office officer wooden and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE CLERK WOODEN (DRG NO. DB-4280):- M & L for carrying out repair/replacement of following parts of Table office Clerk wooden as per drawing after dismantling the old parts complete all as specified

S & F Top 54''x36' made out of 18mm thick prelaminated particle board exterior grade, Make : action tesa/arched/novapan fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S & F Stiffners made of first class hard wood (Teak)

S&F drawer made of first class hard wood (teak) as per drg

S&F of knobs

Cleaning and preparing old polished surface of table office clk wooden and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

SIDE BOARD (DRG NO. FD-241):- M & L for carrying out repair/replacement of following parts of Side Board as per drawing after dismantling the old parts complete all as specified

Top made out of 18mm thick prelaminated particle board exterior grade, Make : action tesa/arched/novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S & F Legs made of teak wood .

S & F Back made out of 6mm thick commercial ply wood Make Kit Ply/National/Arched.

S & F side made out of 18 mm Pertical Board of commercial ply wood Make Kit Ply/National/Arched.

S & F Front of drawers made out of 18mm thick prelaminated particle board Make Kit Ply/National/Arched.

S & F Door shutters with lock made out of 18mm thick block board with 6 mm thick teak wood edging all around of doors Make Kit Ply/National/Arched.

Cleaning and preparing old polished surface of side board wooden and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

S&F of new knob/handle as per sample

S&F new ball catcher As per sample

TABLE DRESSING LEDIES WITH MIRROR (DRG NO. FD-251):- M & L for carrying out repair/replacement following parts to table dressing ladies with mirror, complete all as specified and shown on drgs after removing the old broken part.

S & F Mirror 5.5mm thick electro copper plated of polished plate size 365x1220mm Make Atul/Modi Guard.

S & F Frame of mirror made out of teak wood of size 25 x 19mm.

S & F Top made out of 18mm thick prelaminated particle board exterior grade,Make : action tesa/arched/novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S&F legs made out of first class hard wood (teak) as per drg

S & F Drawers of table.

S & F Sliding glass of table.

S & F channel made out of aluminum for fixture for siliding glass.

S & F Knobs as per sample

Cleaning and preparing old polished surface of table dressing ladies with mirror and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

TABLE CENTRE/TABLE CENTRE TWO TIER (DRG NO. FD-274):- M & L for carrying out repair/replacement following parts to table centre, complete all as specified and shown on drgs after removing the old broken part.

Top 900x450mm made out of 18mm thick prelaminated particle board exterior grade, Make : action tesa/arched/novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S & F Legs made out of first class hard wood (Teak)

S & F Long rails made out of first class hard wood (Teak)

S & F Stiffners of table center made out of first class hard wood (Teak)

Cleaning and preparing old polished surface of table centre and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

S&F of ply wood of 6mm thick commercial for 2 tire table

FOAM WITHOUT BACK 1900 MM (DRG NO. FD-77(M)) :-

S & F of Teak wood planks in one piece size 1900mm long x 255mm wide x 25mm thick with screw/nut and boult as per requirment and directed by the engineer charge all as per drg.

Welding of broken points and painting as per directed by engineer in charge

FOAM WITHOUT BACK 1525 MM (DRG NO. FD-77(M)) :-

S & F of Teak wood planks in one piece size 1525mm long x 255mm wide x 25mm thick with screw/nut and boult as per requirment and directed by the engineer charge all as per drg.

Welding of broken points and painting as per directed by engineer in charge

THRUSTLE STORE ROOM WOODEN (DRG NO. FD-86) :-

S & F of Top long rail of sal wood size 2440mm long x 100mm x 100mm as per drg

S & F of intermeidate stiffener of sal wood 2440mm x 60mm x 100mm all as per drg

S & F of cross stiffener of sal wood 660mm center to center all as per drg

S & F of legs of sal wood 100mm at Top and 75mm at bottom all as per drg

SOFA SET THREE SEATER/SINGLE SEATER WITH DETACHABLE CUSHION (DRG NO. FD-281/FD-373) :- M & L for carrying out repair/replacement of following parts of Sofa set three seater /single seater with detachable cusjion as per drawing after dismantling the old parts complete all as specified

S & F of long rails of seat for three seater sofa of size 1590mmx100mmx35mm of 1st class hardwood (teak) all as per specified and shown in drg.

do but Side rail of back size 575mm x 100mm x 35mm all as per specified and shown in drg.

S & F in replacement of arms for Single / Three seater sofa of size 35mm x 70mm (cross section) of 1st class hard wood (MP Teak) complete all as specified and shown on drgs after removing the old broken arms.

do but batten of size 50mm x 20mm as per specified and shown in drg.

M & L for applying two coat of french polish after preparation of surface complete to sofa 3 seater as per specified and shown in drg.

M & L for applying two coat of french polish after preparation of surface complete to sofa single chair as per specified and shown in drg.

S & F sofa foam cushion 40 density, 100mm thick of standard size covered with tapestry cloth not less than Rs. 180/- per meter as approved by GE. MAKE : SLEEP WELL/COOL FOAM/FEATHER FOAM. Cushion cover duly stiched with one side Jip.

Foam Cushion cover only duly stiched and one side Jip size 530 x 560 mm as per sample approved by engineering in charge.

CHAIR WRITING/CBA (DRG NO. FD-280&250) :- M & L for carrying out repair/replacement following parts to Chair writing/CBA, made out of 1st class hard wood (Teak) complete all as specified and shown on drgs after removing the old broken part.

(a) S & F Front Legs.

(b) S & F Front Rails.

(c) S & F Side Rails.

(d) S & F Arms.

(e) S & F Stiffners.

(f) M & L for applying two coats of french polish to Chair writing/CBA after preparation of surface complete all as specified.

CHAIR DINNING (DRG NO. FD-279) :- S & F in replacement following parts to Chair Dinning/CBB, made out of 1st class hard wood (Teak) complete all as specified and shown on drgs after removing the old broken part.

S & F Front legs.

S & F Front Rails.

S & FSide Rails.

S & F Stiffners.

M & L for applying two coats of french polish to Chair Dinning/CBB after preparation of surface complete all as specified.

CHAIR EASY (DRG NO. FD-229) :- S & F in replacement following parts to Chair Easy, made out of 1st class hard wood (Teak) duly french polished complete all as specified and shown on drawings after removing the old broken part.

S & F Front legs

S & F Front Rails of seat.

S & F Rear Rails of seat.

S & F Arms of Chair easy

M & L for applying two coats of french polish to Chair Easy after preparation of surface complete all as specified.

TABLE DINING OR :-

S & F OF Top of pre-laminated pratical board exterior grade 18/19mm thick in single peace along with teak wood beeding 400 thick all around the Top Make (Action tesa/ Arched/ Novapan) as per drg

Broken frame duly wilded with paint as per directed by engineer in charge

RECANNING OR CHAIRS OF ALL TYPE :_ M&L for removing old broken cane and recanning of Chairs with plastic cane (oval shape) 2mm wide and border with 3mm/4mm wide cane complete as per Godrej pattern using Make : SHAH/RPEMIER brand cane (removing of old broken cane shall be done at BSO yard) as per specified in drg.

Recanning of stool dressing CB (DRG NO. FD-282)

Recanning of chair writing (DRG NO. FD-280 & 1107)

Recanning of chair dinnig (DRG NO. FD-279)

Recanning of chair easy (DRG NO. FD-229 & 1108)

TEAPOY (DRG No. FD-382,FD-278) :-_ M & L for carrying out repair/replacement of following parts of Teapoy as per drawing after dismantling the old parts complete all as specified :-

Supplying and fixing top of 18/19mm thick prelaminated particle board ISI Marked standared make (action tesa/arched/novapan) exterior grade and 6mm thick Teak edging all around.

Supply and fixing long rails of Teak wood all as per drawing.

Supplying and fixing legs of Teak wood all as per drawing. .

Supply and fixing stiffners of Teak wood.

Applying two coat of french polish to Teapoy after necessary preparation of surfaces .

CHAIR BKB/WOODEN BOTTOM :-

S & F OF Seet of ply wood 9mm thick comml with screw as per drg

S & F of side, front rail and stiffner of Teek Wood as per drg

S & F of legs Of Teek Wood all as per drg

Cleaning and preparation of surface and painting

TABLE ONE PIECE (DRG NO. DB-10092) :-

S & F of pre laminated partical Board of 18/19mm exterior grade

S& F of legs of teak wood as per drg.

Cleaning and preparation of surface and painting

TABLE 2'X2' (DRG NO. FD-293) :-

S & F Top of pre laminated partical board18/19mm thick

S& F of legs of teak wood as per drg.

Cleaning and preparation of surface and painting

CHAIR PVC

S & F of foam with violet cloth as per sample and as per drg

TABLE LAUNDARY 5'X3X2 1/2"

S & F of Top shisam wood plank as per drg

S & F of long stiffener of teak wood

Modern Enterprises

SUNIL TRADERS

Arneja Builders

L.BHIMSEN