Provn of certain Special Repair, LBW and Revenue works at Mil Station Kapurthala under GE Kapurthala

Amount

Surface dressing not exceeding 15cm deep including cleaning away all grass vegetation, sapling, shrubs, brushwood, undergrowth, roots and removing rubbish upto a distance of 50 Metres outside the periphery of the area complete all as specified and directed by Engineer - in - Charge.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundations etc or man holes, cesspits etc. not exc 10 Sqm on plan and getting out in soft / loose soil all as specified and directed by Engineer - in - Charge.

M&L Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed by Engineer - in - Charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick all as specified and directed by Engineer - in - Charge.

Removal of excavated material to a distance not exceeding1.5m and depositing where directed at a level not exceeding 5 Km above the starting point all as specified and directed by Engineer - in - Charge.

M&L moorum filling in floors laid in layers not exc. 15cm thick spread, leveled and rammed including watering (Moorum brought from outside MD Land)

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer - in – Charge.

M&L for Hardcore of gauge n exc. 63 mm of broken stone, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed by Engineer - in - Charge.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth, in layers not exceeding 25cm, watering, and removing surplus spoil to a distance not exceeding 50m and making good surface all as specified and directed by Engineer - in - Charge.

S&FMild steel work as of flat iron,MS bars etc. in fencing Incl. cutting tops to shape as directed drilling holes,notching for Wire etc, flat iron fillets for securing wire mesh etc. incl all necessary drilling, blotting or riveting and similar work conf. to fe310-0, fe410-0 and a shop coat of red oxide primer as specified and directed by Engineer - in - Charge.

Supply & fixing MS galvanized chain link fencing any size or type fixed to any type of standard rails,straning bolts etc as specified and directed by Engineer - in - Charge.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone agg. as in filing, mass concrete as specified and directed by Engineer - in - Charge.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end & screwed the other end each screwed end to be fitted with washers & one hexagonal or square nuts exc 10cm and n exc 15cm dia of shank 16mm length exc 150mm but not exc 200mm.

Demolition of brick work built in cement mortar or cement lime mortar all as specified.

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6m mean radious built in CM 1:4 all as specified.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for as specified and directed by Engineer - in - Charge.

M&L RCC 1:1.5:3 type A-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc.complete all as specified and directed

Taking down chowkhats incl shutterrs (without taking off shutters from the frame) n.exc 1.5 sqm each etc complete all as specified and directed.

M & L 75mm thick PCC(1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L 75 mm thick cement concrete 1:3:6 type C–2 using 40mm graded stone aggregates as in flooring finished even and smooth without using extra cement all as specified and directed by Engineer - in - Charge .

Dismantling of floor hearth or wall tiling including granite, cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises as specified and directed by Eng-in-charge.

M & L glazed ceramic coloured tiles 300x200x7mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 15mm thick cement plaster in CM 1:4 as specified and directed by Eng-in-charge.

M&L non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm. but not exceeding 0.11 sqm, in floors coloured tiles over 15mm thick screed bed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed. Make : ORIENT.SOMANY/KAJARIYA/JOHNSON

M&L for coloured vitrified tiles 10mm thick (square/rectangular) polished, area of each tile not exc 0.36 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick CM (1:6) screed bed layer all as specified and directed by Engr-in-Charge

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n exe 4 sqm each

S/F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as specified and directed by Engineer - in - Charge.

S &F factory made solid Panel PVC moulded door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings as specified and directed by Engineer - in - Charge.

S&F in repair Bib taps bore dia of pipe in 15mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule but fancy type long Chromium Plated and fixed etc complete all as specified and directed.

S&F in repairs 15 mm bore CP bib taps fancy type chromium plated cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete.(Make Jaquar CON-CHR-047KN).

Dismantiling water tank PVC 500 Ltrs and removing from site.

S&F rotational moulded polyethylene water storage tank 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed complete all as specified.

Dismantiling water tank PVC 1000 Ltrs and removing from site.

S&F rotational moulded polythelene water storage tanks cylindircal water tank for hoisted and fixed in postion of 1000 ltrs capcity incl fittings and as directed by Engr-in-Charge.

S&F in repairs CI Nahani trap with grating and diameter of outlet 100mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete as specified and directed by Engineer - in - Charge.

Taking down GI tubing & connection 15 mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.

S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc complete all as specified and directed.

Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing.

S&F 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engineer-in-Charge.

S&F 110 mm PVC (SWR) bend complete all as directed by Engineer-in-Charge.

Cutting chases on brick wall, pinning in, making good to facing where required and pointing in CM 1:3 to ends or edges of landing steps cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing and making good n.exc 10cm girth all as specified.

S&F butt hinges medium grade cold rolled 100mm mild steel and fixed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as directed.

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm

S&F150 mm long,aluminium,anodised, barrel tower bolts of extruded section all as directed.

S&F 150mm size aluminium handles,cast type,anodised all as directed.

S&F mild steel barrel tower bolt, stove enamelled black, with bright bolt of 150mm size

S&F mild steel pressed handle , oval type stove enamelled black of size 125mm.

S/F in repairs of size 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as speicified

S&F anodised aluminium frame powder coated for doors & windows with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium window shutters powder coated side hung type without sash bars, aluminium sections weighting 0.55 Kg/ m includng necessary jointing cleats, glazing cloiups, rubber packing, anodised aluminium fittings such as peg stays 150 mm long (1 nos), hinges type B21, 100 mm long (2 nos) suitable handle (1 no) complete all as specified.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door anodised alumnium snap beading, screws etc. complete all as specified

S&F in repair tubular towel rail 20mm dia of brass chromium plated 60cm long between flanges.

S & F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar as specified and directed by Engineer - in - Charge.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

Supply and fix anodised aluminium ventilators powder coated with frames & shutters with one or more rebates including joining cleats, glazing clips, rubber padding, anodised aluminium snap beading screws etc and necessary aluminium iron mongary for fixing etc complete all as specified and directed by EIC.

S&F in repairs 15mm dia stop valve fancy type (concealed type) CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as directed

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe bore dia of pipe in 15mm complete all as specified and directed.(Jaquar CON-CHR-219KN)

S&F soap dish stainless steel of approved make as specified by Engineer in Charge.(Make Jaquar AKP-35731P)

S&F in repairs shower rose of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm).

S&F in repair health faucet with 15mm with CP angle cock all specified by Eng in Charge.(Make Jaquar ALD-563)

S&F corner glass with chromium plated bracket complete all as specified by Engineer in Charge.(Make Jaquar CAN-CHR-1173)

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm incl PCC (1:3:6) filling in frame as specified and directed by Engineer - in - Charge.

S &F Plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats as specified and directed by Engineer - in - Charge.

S&F factory made second class, hard wood, 30mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters as specified and directed by Engr-in -Charge

Taking down cement plaster on brick work or concrete surfaces incl racking out joints all as specified.

M&L for 15mm thick Rendering in CM 1:4 on brick work or concrete surfaces finished even and smooth etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick work or concrete surfaces finished even and smooth w/o using extra cement etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick work or concrete surfaces finished even and smooth w/o using extra cement in Ceiling etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying one coat of Birla white putty to obtain the true line to achieve smooth surface and applying two coats white wash on ceiling complete all as specified and directed by Engr-in-Charge

M & L applying two coat of cement base paint on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in – Charge

M&L for preparation of new plastered surfaces of walls and applying one coat of Birla white putty to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed by Engr-in-Charge

S & F steel work in tublar trusses rafters and posts etc including special shaped water etc, complete using ERW or induction butt welded tubes conforming to IS-1161-1979 ( grade St-240) complete all as specified and directed by Engineer-in-Charge.

S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality B complete all as specified

S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-410(Gde-E250) all as specified and directed.

Material & labour for applying two coats of synthetic enamel paint over a coat of pink primer to wooden surfaces of any description over 10cm width or girth including preparation of surface complete all as specified.

Material & labour for applying two coats of synthetic enamel paint over a coat of red oxide primer to new steel surfaces of any description over 10cm width or girth including preparation of surfaces of any description over 10 cm width or girth complete all as specified.

Demolition of cement concrete(unreinforced) in ground floor n.exc 15 cm thick below or above ground level

Applying evenly a tack coat of industrial bitumen 85.25 @ 1.20 Kg/sqm including cleaning surfaces complete all as speciified and as directed by Engineer-in-Charge.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base.

M&L Cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate for foundations, fillings and mass concrete all as specified and directed by Engineer – in - Charge.

M & L 100 mm thick cement concrete 1:2:4 type B–2 using 40mm graded stone aggregates as in flooring finished even and smooth without using extra cement and spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green all as specified and directed by Engineer - in - Charge .

S&F mild steel curtain rod of 24mm dia powder coated having wall thickness 1mm, with aluminium coated brackets fixed to walls with screws, gutties @1500mm c/c and curtain rings(min. 5 nos rings per running mtr of curtain rod) including taking out the existing old pelmet box along with old curtain rods and removing complete, all as specified and directed.

S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty all as specified.

S&F 4.00mm thick figured glass, pinhead type in squares exc 0.5 sqm each pane and glazing with oil putty all as specified.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire stapels complete all as specifed and directed.

S& F in repairs Ball valves high pressure of PTMT 20mm dia with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms)

S&F in repair 20mm dia gunmetal gate valves with iron wheel screwed both ends for iron pipe and fixed.

S & F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Dismantling of ceiling of any description fixed in any position fixed with nails/screws including fillets.

M & L for 12mm perforated particle board 600 x 600 x 12mm for ceiling on aluminium snap grid frame work of 605 x 605 mm and hangers 6mm dia GI upto (1200mm length) adjusting level fixed to roof slab by means of celing cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fastner 12.5mm dia 40mm long including two OBD complete all as specified.

Dismantling of wall board (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Supply and fix PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed by the Engineer-in-Charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawind as directed be Eng-in-Charge

Dismantling timber scantling 40 Sqcm and over in section as in unframed work.

Dismantling corrugated asbestos sheet in roof covering.

Supply and fix for vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap fancy type chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete

S&F in repairs vitreous china European type wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat black closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity make white in colour and PVC flush pipe 32mm dia complete.

Taking down aluminium/copper point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :-

(a) One light point controlled by one, one way switch

(b) One Ceiling fan/exhaust fan point controlled by one, one way switch

(c) One socket outlet 3 Pin, 5 Amp on independent board

(d) One socket outlet 3 Pin, 5 Amp on same board.

(e) One bell point controlled by one bell push

(f) One light point controlled by two 2 -way switches, with cables 1.5 Sqmm size.

M&L for point wiring with 4.00 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 4 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board.

S&F switch piano flush type single pole one way 5 Amp (ISI Marked) Make - SSK/Anchor/Cona

S&F switch piano flush type single pole one way 15 Amp (ISI Marked) Make - SSK/Anchor/Cona

S&F Bell push flush type single pole one way 5 Amp (ISI Marked) Make - SSK/Anchor/Cona

S&F socket out let 2 in 1, 3 pin 5 Amp flush type (ISI Marked) Make - SSK/Anchor/Cona

S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) Make - SSK/Anchor/Cona

S&F switch piano flush type single pole two way 5 Amp.Make - SSK/Anchor/Cona

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) Make - SSK/Anchor/Cona

M&L for bell multi music type, AC 230 Volts, single pole (ISI Marked)

Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface.

Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of self ballast ed LED Batten extruded alluminium with PC diffiuser Integral isolated driver >120 degree wide light distribution, available CCT 6500K with all accessories Make Polycab Cat part No INTENSO DLX LED BATTEN 4 FEET 20 W or equivalent in Philips/Bajaj/C&S electric/Surya

Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:-

(a) S & F of MCB, 10 to 32 Amp, SP, 240 Volt Make - C&S, Legrand/Schneider-Acti 9/Siemens-Betagard

(b) S&F of MCB, 32 to 40 Amp, SPN, 240 Volt Make - C&S Legrand/Schneider-Acti 9/Siemens-Betagard

Taking down old unserviceable sub main wiring 6/ 4.00 Sqmm 1100 volts grade two runs of single core PVC insulated, unsheathed copper condutor, including taking down casing capping/PVC conduit.

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Two run of 6.00 Sqmm cable one run of 6.00 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit.) Note : Two run of 6.00 Sqmm cable and one run of 6.00earth wire & 20 mm PVC conduit shall be measured as one unit length.

Taking down old unserviceable wall mounting fitting & supply & fix decorative wall light fixture made up of polycarbonate suitable for 1 x 15 W retrofit LED/CFL rings, and glass shade with lamp holders, connectors block, 1 x 15 watt LED Blub,glass fitted engineering plastic B22 d lamp holder with electrical copper contactcs, self screwed polycarbonate diffuser in opal finish for soothing light effect, LED 15 watt etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable complete cat part No LHDL02160099 Make ; Havells or equivalent in bajaj & philips

Taking down old unserviceable bulkhead fitting & supply & fix bulkhead fitting decorative ceiling/wall mounted BULK HEAD with engineering plastic housing and top frame with opal PMMA diffuser suitable for 1 X 06 watt LED Blub including 1 No of 06 watt LED of cat part No CG80IB6WLED of C&S electric or equivalent in model of Philips or Bajaj complete all as specified and directed by Engineer-in-Charge,

Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 12W.

Taking down old unserviceable regulator & supply & fix electronic type fan regulator stepped type on existing phenolic laminated sheet etc. suitable for ceiling fan.

Taking down old unserviceable and S & F in repair for sheet metal enclosure single pole and neutral with two pin and earth plug complete with one single pole MCB 20 Amps 240 volt (Make: Havells/MDS/Legrand) Note : Submain wiring to be drawn from meter.

Supply and fix water heater storage verticle type, electric , capacity 50 litres BEE 5 star rated complete with all accessories Make. Havells Cat Part No GHWAMESWH050 Note : Retrived water heater to be deposited in MES Yard.

S&F ventilating fans plastic body size of 150 mm sweep self closing louvers, ideal for mounting on wood & glass complete all as specified and directed by Engr-in-Charge.

S&F triple pole and neutral DBs 4 way 415 Volts suitable for mounting MCCB with 200 amps rated bus bar inluding indicating lamp - 03 Nos Make Legrand/Havells/C&S Note :- Incoming MCCB will be measured and separately)

Supply and fixing in replacement MCCB 4 pole 63 Amps 18 KA breaking capacity, 415Volts,AC 50 Hz, with overload and thermal tripping features. Make : L&T / Legrand / Indo-Asian etc..

Supply, install, testing and commissioning of LT panel size 800 mm x 600 mm x 150 mm enclosures cubical weather and vermin proof totally enclosed made out of 1.6 mm thick CRCA sheet machine pressed of suitable size to operate on 3 phase 4 wire system 415 Volts, 50HZ double door with front openable and PVC acrulic glass cover suitable size for checking of meter reading without opening door with locking arrangement incl inner shutters for mounting switch gear etc, suitable arrangement for fixing of electrical meter and SPN 40 to 63 Amp including pre wiring from Meter to MCB SPN (for pre wiring use 6.00 Sqmm Single core copper cable and suitable size of lugs/thimble for connecting from meter to MCB SPN) including bottom gland plate with sufficient numbers of circular cable entry holes, including prewired complete as per drawing with masonary work for fixing in wall duly powder coated with comprising of the following :-

(i) MCB 63 Amp, 230 Volt,10 KA, Single pole and neutral -03 No Make : Legrand/Siemens/Schnedier

(ii) S&F single phase electronic energy meter with LCD display of rating 5-30 Amp class 1.0, 240V 50 Hz counter type display with transparent hinge including connection from SPN to meter with 6 Sqmm copper stranded conductor including earth wire complete all as specified and directed by Engr-in-Charge.Make-HPL Cat part No SPPC131000000200C00 or equivalent in Neptune - 03 Nos

S&F distribution board single pole and neutral 8 way 240 V double door type suitable for mounting incoming and outgoing MCB's double pole/single, 4/8 Nos respectively out going MCB's Note :-Incoming and outgoing MCB SP/TP will be measured and separately)

Supply and fixing in replacment 40 mm dia GI tubing medium grade complete with all fittings (ISI Marked) lain in trenches/fixed complete to wall and ceiling or laid in floors

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric cable (heavy duty) 1100 volts grade with standard aaluminium conductor of size 25 Sqmm 3.5 core

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric cable (heavy duty) 1100 volts grade with standard aaluminium conductor of size 16 Sqmm 2 core

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out including trimming of sides complete all as specified and directed by Engineer-in-Charge.

Returing, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cms thick each layer compete all as specified and directed by Engineer-in-Charge.

Removal of surplus spoil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-charge.

Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with length of bricks perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed by Engineer-in-charge.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.

(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I.

(ii) Item includes the cost of 7.50m GI pipe for protection of earth wire/strip Any variation in length shall be adjusted through deviation order.

(iii) Item includes cost of 7.50m earth lead wire/strip. Any variation in length shall be adjusted through deviation order.

(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

KAMAL AGGARWAL

G M BUILDERS 36