SPECIAL REPAIRS TO OFFICERS MD ACCN FARM 26 AND 28 AND CERTAIN REVENUE AND

Amount

Taking down complete of existing water proofing treatment of any description over roof slabs / parapets including bedding layer and roughening of surface etc., complete all as specified and directed.

Demolition of cement Concrete of any description and in any position including padding concrete of roof/ cjajjas all as specified and directed.

Providing Plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate average thickness 40mm as in levelling / padding course on roof slab, projections on similar surfaces existing with slope making the surface even and smooth without using extra cement all as specified and directed.

Rendering 10mm thick fair faces of brick work or concrete surface in cement mortar 1:4 laid over the RCC roof slab, parapet wall when the concrete is green at any height and making the surface fair and even without using extra cement including using liquid integral water proofing compound as per manufacturer's instructions all as specified and directed. Note: Water proofing compound will be measured and paid separately.

Supply only liquid water proofing compound all as specified and directed.

APP modified prefabricated polymeric water proofing membrane mineral finish 4mm thick and weighing not less than 4.5 kg/sqm reinforced with non-woven polyester matt black finished weighing not less than 100 gm/sqm having softning point less than 140 degree celcius longitudinal tensile strength not less than 300N/sqcm, side lap 10cm with torch application of membrane over compatible primer at 0.40 Ltr/sqm and aluminium paint at 0.10 kg/sqm finished on top complete all as specified and directed.

Applying waterproof and damp proof treatment a uniform coat of blown grade bitumen 85/25 @ 1.20 Kg per Sqm conforming to IS 702/cold applied bituminious elastomeric coat over a coat of primer in sunken floor/ plaster including cleaning surfaces all as specified and directed.

Priming surfaces with a coat of primer @ 0.70Kg per Sqm over plastered surfaces and applying heavy treatment (for severe conditions) conforming to IS 3384 in sunken floor all as specified and directed.

Material and labour for 150 micron black polythene film (1410 gms per 10 Sqm) all as specified and directed.

Durastone Heavy Duty Tiles of thiskness 10mm (rectangular/ square) of area 0.09 Sqm to 0.18 Sqm as in floors set and jointed in neat cement slurry and pointed in white cement with pigment to match with the colour of tiles including screed 15mm thick in cement mortar 1:4 complete all as specified and directed.

Durastone Heavy Duty Tiles of thiskness 10mm (rectangular/ square) of area 0.09 Sqm to 0.18 Sqm as in skirting / dadoo set and jointed in neat cement slurry and pointed in white cement with pigment to match with the colour of tiles including 10mm thick backing plaster in cement mortar 1:4 complete all as specified and directed.

Plain cement concrete Type B1 1:2:4 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Plain cement concrete 1:2:4 type B2 using 40mm graded stone aggregate 100mm thick as in flooring, tank stagging complete fair finished even and smooth without using extra cement all as specified and directed.

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed.

Taking down Shutters of any description exceeding. 1 sqm and not exceeding 2 sqm all as specified and directed.

2nd class hard wood wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

35 mm thick flush shutter, solid core construction, with block Board Core and plywood face panels covered with decorative Face Veneer on one faces with lipping / frame on one faces, complete all as specified and as directed.

35mm thick second class hardwood glazed and skeleton door shutters open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded with cut and mitred beads for securing glass/gauges, size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed sheet, reinforced with M.S square tube supply and fixing in opening as per specification and drawing.

Factory made solid panel PVC Moulded Door shutters 28 to 30mm thick (stile) but 2mm thick 3D wood grains moulded PVC sheet polyurethene painted on front face and 2mm prelam PVC sheet on front and back face with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face, supplying and fixing in frame at site as per specification and drawing.

Factory made UPVC white colour sliding window three track, area not exceeding 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (± 0.2mm) window profile with hollow section with multi chamber frame (88mm x 85mm) sliding sash (42mm x 67mm) sliding mesh sash (42mm x 57mm) sliding mesh sash (42mm x 57mm) sliding interlock (one vertical length in each shutters) (45.5mm x 28mm) Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket, 1.2 (± 0.2mm) thick galvanised steel frame (30mm x 18mm) 2 Nos sliding sash (30mm x 18mm) sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware (Touch Lock of zinc alloyed (white powder coated) steel roller system stainless stell wire cloth 0.36mm nominal dia of wire and average width of aperture 140mm and required accessories all as specified and directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories and wire mesh. The net opening will be measured for payment purpose.

All as per item No 22 hereinbefore but area exceeding 2.00 Sqm each all as specified and directed.

Supply and Fix UPVC ventilator frame shall be made of PVC material confirming to IS-10151 the ventilator frame of extruded UPVC section having overall dimensions of 100mmx62mmx50mm having wall thickness 2mm+- 0.2mm. Corners of wall frame shall be joined by MS galvanised brackets joints mitred and plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thickness 1mm +/- 0.1mm and the tie rod shall be provide at the bottom of the frame all as specified and directed. Glazing (1) : The ventilator system should be including glazed with 5.5mm thick glass of size as required in ventilatior frame (louvered type) as per manufacturer instructions including all fittings and necessary locking arrangements complete all as specified and directed.

Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Applying one coat of sythentic enamel painting on old steel painted sufaces including prearation of surfaces10 cm width or girth all as specified and as directed.

Preprtion of old wooden surfaces of any description, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Butt hinge, 100 mm long medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

Extruded aluminium alloy handles 150 mm long, fabricated type, anodised complete all as specified and as directed

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long all as specified and directed.

Mild steel hold fast conforming to Fe-290 Gde-165 all as specified and directed.

PCC type C1, 1:3:6 using 20mm graded stone aggregate over platform, bed blocks for hold fast, and like of any description, over 10mm in width or grith not otherwise described all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

Floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor and including fixed in repairs all as specified and as directed.

Aluminium handles, cast type anodised, extruded section 150 mm long including fixed in repairs all as specified and directed.

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified and directed.

150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed in repairs complete all as specified and directed.

Mild steel Framed work such as grill, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters, walk ways, railings, frame work of water tank and simialr work conforming to Fe290 Gde E-165 all as specified and directed.

Preparation of new or untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Preparing surfaces of small articles such as stop, covers, gully, gratings, hold fast, etc area not exceeding 0.1 Sqm each of any description and grith, not otherwise described and treated with or coal tar black paint all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple and fixed in repairs all as specified and directed.

Dismantling boarding/ ceiling board of any description fixed in any position with nails complete all as specified and directed.

Kitchen and Cupboard Shutter / shelf / partition / cabinet care case of required sizes made out of HDHMR Board 18 mm thick one side decorative Lamination & other side Balancing Lamination . The 18 mm thick board shutter / cabinet care case finished at all level including all fixing hardwares and solvent as per the Manufacturers Instructions complete all as specified and directed. Make: Action Tesa or equivalent

Stainless Steel Auto closing Hinges fixed to Cabinet Shutters complete as per Manufacturers specifications and all as specified and directed. Make : EBCO or Equivalent

100mm Stainless Steel handles rectangular shape polished bright complete all as specified and directed. Make : EBCO or Equivalent

Telescopic Channel in required length including all fixing accessories/ hardwares all as specified and directed. Make : EBCO or Equivalent

Stainless steel pipe curtain rod 20mm dia including side caps and single/ double brackets as in repairs fixed with end brackets complete all as specified and directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 300x600x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in cement mortar 1:4 on fair face of brick or concrete surface complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

25mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate all as specified and directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Vitrified coloured ceramic tiles double charged 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement slurry to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Vitrified coloured ceramic tiles double charged 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in skirting/, dadoo etc. set and jointed in neat cement slurry and pointed in white or coloured cement slurry to match over and including 10mm cement plaster as backing coat in cement mortar 1:4 complete all as specified and directed.

Granite 20mm thick machine cut, as in floor bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in cement mortar 1:4 all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth (without using extra cement) mixed with water proofing compound complete all as specified and as directed.

Rendering 5mm thick on fair faces of brick work or concrete surface in cement mortar 1:3 in ceiling of chajjas/ roof projection etc finished even and smooth without using extra cement complete all as specified and as directed.

Preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion Paint (Anti Fungal) white or tinted over a coat of primer over a coat of external wall care putty smooth finish complete all as specified and as directed.

Preparation of newly treated surfaces of walls and applying two coats of oil bound distember including a coat of wall care putty with 2 to 3mm thick including a coat of primer complete all as specified and directed.

Preparation of new ceiling surfaces and applying two coats of oil bound distemper over one coat of primer over and including one coat of putty complete all as specified and directed.

Complete removal of existing treatment of wall surfaces and applying one coats of primer (water thinable/ solvent thinable) over and including one coat of putty in two layers 2-3mm thick even and smooth and applying two coats of oil bound emulsion distemper (washable) complete all as specified and directed.

Complete removal of existing treatment of ceiling surfaces and applying one coats of primer over and including one coat of putty in two layers 2-3mm thick even and smooth and applying two coats of oil bound distemper (washable) complete all as specified and directed.

Preparation of old decorated plastered or unplastered surface of ceiling by brooming down or steel wire brushing scraping down smoke spots, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coats of white wash on ceiling complete all as specified and directed.

Preparation of old decorated plastered or unplastered surface of walls by brooming down or steel wire brushing scraping down smoke spots, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coat of white wash on walls complete all as specified and directed.

Complete removal of existing treatment of wall surfaces and applying one coats of primer (water thinable/ solvent thinable) over and including one coat external putty even and smooth and applying external emulsion paint (Anti Fungal) white or tinted complete all as specified and directed.

Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete including fixed in repairs all as specified and directed.

Single lever sink Mixer with swinging spout (wall mounted model) with connecting legs and wall flanges complete all as specified and directed. Make: CAT No SOL-6163/SOL-6165 of JAQUAR or techno-commercially Equivalent

Floor mounted coupled water closet of size 655x370x770mm with flushing cistern, with duraplast seat cover, Hinges, fixing Accessories set including P or S trap including fixed in repairs complete all as specified and directed. Make: Cat No S1021110, S1060103, B1530117 & B1810113 of CERA or techno commercially equivalent

Supply and fix in repairs table top basin of size 550x400x160mm including waste coupling and stainless steel bottle trap complete all as specified and directed. Make: Cat No S-2020102 (Campa) of CERA or techno commercially equivalent

Single lever basin mixer wall mounted consisting of Operating lever, Wall Flange, Nipple & Spout including concealed body and 450/ 600mm long braided houses complete all as specified and directed. Make: Cat No. KUP 35233KPM and ALD 233/ ALD235 of Jaquar or techno commercially equivalent

CP single lever exposed parts Kit of Hi Flow Diverter Consisting of operating Lever, Wall Flange (with seal) & Button spout complete fixed in repairs all as specified and as directed. Make: Cat No KUP-35079KPM of Jaquar or equivalent

Concealed body for single lever high flow diverter with button assembly, cartridge sleeve (without exposed part) complete fixed in repairs all as specified and as directed. Make: Cat No ALD-079 of Jaquar or equivalent

Spout with button attachment for Hand shower with wall flange complete fixed in repairs all as specified and as directed. Make: Cat No SPJ-35463PM of Jaquar or equivalent

Over head shower rose 200 mm X 200 mm square shape single flow with shower arm square 300 mm long and fixed in repairs complete all as specified and as directed. Make: Jaquar or equivalent

Chroumium plated fancy type long body 2 in 1 bib tap fixed with existing pipe and fixed in repairs all as specified and as directed. Make : KUP-35041 PM of Jaquar or techno commercially equivalent

Supply and fix in repairs towel rack 600mm long brass cromium plated with lower hangers as in bathroom complete all as specified and directed.

CP toilet paper roll holder complete fixed in repairs all as specified and as directed.

Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed in repairs all as specified and directed.

Angular stop cock with wall flange for 15mm dia of chorumium plated fancy type, for 15mm dia in repairs complete all as specified and directed. Make: Cat No KUP-35053PM of JAQUAR or techno commercially equivalent

Bib tap fancy type chromium plated fixed to 15mm bore in repairs complete including fixed in reapirs all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Soap dish complete fixed in repairs all as specified and directed. Make:Cat No.ACN-1131N of JAQUAR or equivalent

PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed.

Health Faucet with 8mm dia, 1 m long flexible tube and wall hook with back flow preventer and fixed in repair all as specified and as directed

Supply and fix in repairs Chromium plated hand shower rose 120mm dia round shape multi flow with cascade effects rubit cleaning system complete all as specified and directed. Make: Cat No HSH-1731 of Jaquar or equivalent

Hand shower flexible tubes 12mm dia & 1.5m long with nuts complete and fixed in repairs all as specified and directed. Make: Cat No SHA-549D12 of Jaquar or equivalent

Supply and fix in repairs premium Chromium plated wall bracket for hand shower 35mm dia and 100mm long round shape complete all as specified and directed. Make: Cat No SHA-555 of Jaquar or equivalent

Taking up or down GI tubing 15mm bore medium grade and connections, all as specified and directed.

Taking up or down GI tubing 20mm bore medium grade and connections, all as specified and directed.

Supply, laying and testing steel water tubing 15mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified and directed. Note: The rate inclusive of cutting grooves and making good for making concealed pipes.

Supply, laying and testing steel water tubing 20mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified and directed. Note: The rate inclusive of cutting grooves and making good for making concealed pipes.

Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repairs of size 20mm dia (Minimum weight 25mm-455gms) complete all as specified and directed.

Gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of size 20mm dia all as specified and directed.

Dismantling PVC water tank exceeding 250 ltrs and not exceeding 500 Ltr capacity from existing position and deposit to store yard of MES all as specified and as directed.

Rotational moulded polyethylene water storage tank of capacity 1000 Ltr (cylindrical vertical with closed top) three layers, lid thread type hoisted and fixed in position with proper inlet and outlet connections all as specified and as directed

Disconnecting existing tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and refixing in position all as specified and directed.

Disconnecting existing tanks of capacity exceeding 250 ltrs and not exceeding 500 ltrs, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and refixing in position all as specified and directed.

Stainless steel plate track of size 0.9 X 1.2 m complete all as specified and as directed.

Demolition and breaking up drain pipe of any description of any size complete all as specified and as directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) 110mm dia pipe single socketed in any length, with rubber ring joint fixed to walls with clamps complete all as specified and directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls with clamp, complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia complete all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia with access door complete all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia with access door complete all as specified and as directed.

Stack clamps out of 50mm by 5mm by flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 75mm bore of pipe, complete all as specified.

Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 110mm bore of pipe, complete all as specified.

PVC (SWR) vent cowl of 75 mm bore of pipe complete all as specified and directed

PVC (SWR) vent cowl of 110 mm bore of pipe complete all as specified and directed

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified.

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4,complete all as specified and as directed.

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and as directed.

Demolition of cement concrete reinforced in ground floor and paving not exceeding 15cm thick and water tank staging etc (below or above ground level) complete all as specified and directed.

Reinforced cement concrete (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and similar work complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Rendering 15mm thick on fair face of brick work or concrete surfaces in cement mortar 1:3 at sunken floor finished smooth and even without using extra cement including using liquid integral WPC as per manufacturers instructions complete. Note: Supply of liquid intergral water proofing compound will be measured and paid seperately.

Applying for waterproof and damp proof treatments a uniform coat of blown grade bitumen 85/25 @ 1.20 Kg per Sqm conforming to IS 702/cold applied bituminious elastomeric coat over a coat of primer in sunken floor including cleaning surfaces all as specified and directed.

Priming surfaces with a coat of primer @ 0.70Kg per Sqm over plastered surfaces and applying heavy treatment (for severe conditions) conforming to IS 3384 in sunken floor all as specified and directed.

APP modified prefabricated five layer water proofing membrane, 3mm thick and weighing not less than 3.6 kg/Sqm as discribed at sunken floor on primed surface by forced application complete in sunken floor all as specified and directed.

20mm thick cement mortar 1:4 screed mixed with liquid water proofing compound over APP membrane in sunken floor all as specified and directed. Note: Supply of liquid integral water proofing compound will be measured and paid separately

40mm dia light grade GI spout at the lowest point with 30cm projection beyond the outer face of the wall in sunken floor all as specified and directed.

Lean concrete 1:5:10 type E2 with 40mm graded stone aggregate with lime mortar 1:3 filling in sunken portion all as specified and directed.

Cutting into existing manholes for connecting new drains of 100mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Plain cement concrete in surface channels and drains finished even and smooth of type D-2, 1:4:8 using 40mm graded stone aggregate complete all as specified and directed.

Dismantling of PVC water tank 500 Ltrs capacity from existing position and deposit to store of AGE B/R all as specified and directed.

15mm bore steel tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed.

20mm bore steel tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed.

Fixing only GI tubes 15mm bore medium grade with all fittings and laid in floor/ wall/ ceiling etc complete all as specified and directed. Note: The pipe obtained from dismantling shall be reused as directed.

Fixing only GI tubes 20mm bore medium grade with all fittings and laid in floor/ wall/ ceiling etc complete all as specified and directed. Note: The pipe obtained from dismantling shall be reused as directed.

75mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring, Tank Stagging complete fair finished even and smooth without using extra cement all as specified and directed.

3mm thick homogeneous PVC tiles/ sheets, laminated plain coloured, marbled mosac or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. and with existing colour all as specified and directed.

Point wiring complete 1.5 Sqmm FRLS grade single core PVC insulated, unsheathed 1100V grade copper multistranded conductor drawn through and including rigid PVC conduit medium grade concealed on surface of walls, roofs, floors, truss etc including PVC insulated copper earth continuity conductor 1.5 Sqmm FRLS cable connected to common earth dolly including steel terminal boxes suitable for ,modular plate for accomodating the switches, sockets, regulators etc for one light / exhaust fan point controlled by one switch all as specified and directed. Note: (i) Modular frame plate with match cover shall be measured and paid seperately. (ii) Cutting chases shall be measured and paid seperately.

All as per item No 141 hereinbefore but for one 5A 3pin/ 5pin socket point on independent Board all as specified and directed.

All as per item No 141 hereinbefore but for One bell point controlled by one bell push all as specified and directed.

All as per Item No 141 hereinbefore but wiring complete with 2.5 Sqmm for 5/15A socket on independent board all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module multipurpose all as specified and directed.

Modular Bell push 6A 230V, AC 50 Hz SP One module all as specified and directed.

Buzzer, ding dong AC 230 volts, single pole all as specified and directed.

Frame plate with matching cover, one module plate all as specified and directed.

Frame plate with matching cover, two module plate all as specified and directed.

Frame plate with matching cover, three module plate all as specified and directed.

Frame plate with matching cover, four module plate all as specified and directed.

Frame plate with matching cover, six module plate all as specified and directed.

Ceiling rose 3 terminals PVC/ Poly carbonate isolated body including base block complete all as specified and directed.

LED light fittings 1 x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Decorative LED wall light made up of unbreakable poly carbonate suitable for mounting on wall/ surface including replacement all as specified and directed. Make: Surya Model: Sar n, Cat Ref No S_EWL 6W_GS200 or equivalent in Phuilips/ CG/ Bajaj/ Havells

LED light fittings 1 x 9W / 1 x 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

Round surface mounted LED flat panel 10W luminaire slim and elegant downlit parel with all accessories including repalcement all as specified and directed. Make: SURYA: Model: Stellar Dgelit round surface, Cat No SLE DLS 10W XX Stellar RD or equivalent in Phuilips/ Bajaj/ Havells

Taking down copper / Aluminium sub main wiring of any size and runs complete and removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good matching with the existing colour to the disturbed surfaces of walls, floors etc all as specified and directed.

Sub main wiring using 2 runs of 6 Sqmm FRLS PVC insulated copper conductor 1100 volt grade conforming to IS specification drawn through and including PVC conduit along with 1 run of 6 Sqmm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly complete all as specified and directed. Note: (i) One run of PVC conduit, and 3 runs of 6 Sqmm cable will be measured as one unit.

Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB 240V all as specified and directed

Taking down old unservicable RCCB, MCB, MCB DB of any size/ type/ ways complete and and removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good matching with the existing colour to the disturbed surfaces of walls, floors etc all as specified and directed.

Supply and fix MCB DB SPN 12 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

MCB SPN 32 Amps, 230 volts complete all as specified and directed.

MCB SP 6-32 Amps, 230 volts complete all as specified and directed.

Cutting chases in concrete wall / stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3 and making good as per existing finishes, cutting not exceeding 20cm girth all as specifed and directed.

Taking down old unservicable exhaust fan and supply and fix exhaust fan with PVC body 250mm sweep including removing the existing old one and depositing to MES store yard for the safe custody of the item all as specified and directed.

Storage type electric water heater (Horizontal type) 25 Litres capacity with 2 KW heating element, Glasslined tank, non corrosive and durable engineering plastic body capillary type thermostat and stem type cut out hot water output at 45 degree C, 4 Star rated ISI marked complete all as specified and directed, including taking down old geyser and deposit to AGE E/M Store.

Supply, installation, commissioning and testing of inverter Technology Hot & Cold Split type wall mounted Air Conditioner (indoor & outdoor unit with cordless remote control unit) of capacity not less than 1.5 TR, BEE 5 star rating, fitted with rotary compressor Refrigerant type R-410A/R-32, Rated cooling capacity rated (4500 Kcl/ Hrs) including PVC FRLS grade multi stranded copper conductor cable 3 core 2.5Sqmm for connections with outdoor unit, powder coated brackets/ chowki stand for outdoor unit, clamps, nuts, bolts washers drilling holes on walls/ ceiling for connection/ drain pipes and makinggood the disturbed surfaces of wall / ceiling with cement mortor, white cement and painting work to match the existing surfaces of walls complete all as specified and directed. Make: Daikin/ O-General/ Hitachi. Note: (i) PVC drain pipes of suitable size & heavy duty copper connection pipes including suitable insulation are deemed to be included in above quoted rate.

Supply and fix AC box 25 Amps three pin socket with one 25Amps SP MCB complete all as specified and directed. Make: Legrand / ABB/ Havells.

AC Sub main wiring ISI marked with 2 runs of single core 6 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694) multi stranded, unsheathed 1100 volts grade in PVC casing capping (medium grade) of adequate size on surface of wall/ ceiling with all fittings and casing capping accessories including one run 6 Sqmm single core unsheathed multi stranded, copper cable FRLS (conforming to IS-694) as earth continuity complete all as specified and directed. Note: (i) 3 runs of cable and PVC casing capping shll be measured as one unit lenght.

All as per item No 175 hereinbefore but 4Sqmm all as specified and directed.

MCB DB SPN 4 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar single Phase including necessary dummy plate and necessary civil works all as specified and directed.

240V, 10KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP in the MCB DB complete with connection testing and commissioning all as specified and directed.

All as per item No 177 hereinbefore but SPN 230V 40Amps capacity all as specified and directed.

Supply, installation, testing and commissioning of voltage stabilizer for automatic operation single phase, wall mounted, copper wounded, Air cooled with digital display designed for input variation between 160 volt to 260 volt with output voltage 220 + 9% volt with calibration accuracy + 3% with high low cutoff, intelligent time delay facility and of capacity 4.0 KVA complete all as specified and directed. Make: V-Guard Dura 2040 digitl voltage stabiliser / MICROTEK/ VOLINA/ SINETRAC

sree devi construction

P K ENTERPRISES

K.AYYAPPAN

GMS Builders