CONSTRUCTION OF ONION STORAGE STUCTURE 1000 MT

Amount

Civil Work

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area& stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. By Manual/Mechanical Means. With Lift upto 1.5 m.

Providing dry trap / granite / quartzite / gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting complete.

Providing and laying cast in situ/Ready Mix cement concrete in M-15 of trap / granite / quartzite / gneiss metal' moulded or chamfered as per drawing or as directed for including centering, form work, compacting, covering newly laid concrete by gunny bag, plastic or tarpaulin, roughening them if special finish is to be provided and curing and finishing if required etc. complete. (The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. (Wooden planks / shuttering will not be allowed. The shuttering should be of waterproof plywood or tailer made angle and steel plate) with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum type mixer/concrete Batch mis plant( Pan Mixer ) etc.. complete with fine aggregate( Crushed Sand VSI grade.)

Providing and laying cast in situ/Ready Mix cement concrete in M-20 of trap / granite / quartzite / gneiss metal' for RCC work in Foundations like raft, strip foundations, grillage, and footings of RCC column and steel sstanchionsetc.. including bailing out water, Steel centring formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finishes to be provided ( Excluding reinforcement and structural steel ) etc.. complete with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum type mixer/concrete Batch mis plant( Pan Mixer ) etc.. complete with fine aggregate( Crushed Sand VSI grade.)

Providing and laying cast in situ/Ready Mix cement concrete in M-20 of trap / granite / quartzite / gneiss metal' for RCC column as per detailed design and drawings or as directed including bailing out water, Steel centring formwork, laying/pumping cover blocks, compaction and curing, finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give smoth and even surface or roughning if special finishes to be provided ( Excluding reinforcement and structural steel ) etc.. complete with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum type mixer/concrete Batch mis plant( Pan Mixer ) etc.. complete with fine aggregate( Crushed Sand VSI grade.)

Providing and laying cast in situ/Ready Mix cement concrete in M-20 of trap / granite / quartzite / gneiss metal' for RCC beam / lintel as per detailed design and drawings or as directed including bailing out water, Steel centring formwork, laying/pumping cover blocks, compaction and curing, finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give smoth and even surface or roughning if special finishes to be provided ( Excluding reinforcement and structural steel ) etc.. complete with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum type mixer/concrete Batch mis plant( Pan Mixer ) etc.. complete with fine aggregate( Crushed Sand VSI grade.)

Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete.

Filling in plinth and floors with contractor's material approved by Engineer-in-charge in 15 cm to 20cm. layers including watering and compaction complete

Providing and fixing in position T.M.T. steel bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.(T.M.T. steel from Minimill / Mini plant Plant)

Providing, fabricating and erecting at site of work the tubular / rectangular hollow steel structure (shed) of standard size as per standard design and specifications, having various spans ranging from 6 m. to 18 m. length, in-between trusses and in multiples of standard length of bays as specified, as per standard specifications inclusive of cost of steel tubular / rectangular hollow trusses, tubular columns (3.5 m. height), purlins, tie runners, foundation bolts, base plates, nuts & bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade complete. Additional Item As directed by Engineer-in-charge etc.. complete

Providing and fixing colour coated zincalume( R ) AZ150 ( min. 150 gms/sqm total on each side ) profile sheets for roofing. The feed material is manufactured out of nominal 0.45 mm base metal. Thickness ( BMT ) (0.5 mm TCT), Hi strength steel with mim 550 Mpa yield strength, metalic hot dip coated with Aluminium-Zinc alloy (55 % aluminium, 43% Zinc, 1.6% Silicon) with COLORBOND ( R ) steel quality superdurable polyester paint coat ( with organic pigment )

Onion Storage Box ( Providing and fabricating structural steel work in rolled section like joists, channel, angles, tees, etc… as per detailed design and drawings or directed including cutting, fabricating hoisting, erecting, fixing in position making riverted / bolted / welded connections without connecting plates, braces etc... and including one coat of anticorrosive paint and over it two coats of oil paint of approved quality and shed etc.. complete.

ELECTRIFICATION

Supplying, erecting and terminating XLPE armoured cable 3 core 6 sq mm. (12 SWG) GI earth wire complete erected with glands and lugs, on wall/trusses/pole or laid in provided trench/pipe as per specification.

Making trench suitable width and depth in hard murum/tar road for laying provided LT cable up to and including 16 sq.mm. complete as per specification

Making trench suitable width and depth in soft soil for laying provided LT cable up to and including 16 sq.mm. complete as per specification

Supplying and erecting mains PVC unarmoured cable 1100 volts, grade ISI mark 3 core / 2.5 sq.mm. stranded/solid copper complete erected on wall with duly painted GI saddle.

Supplying and erecting waterproof powder coated distribution board 4 way with 2x 6/10 Amp S.P.M.C.B. with industrial two pin plug socket 10 A and 3 pin plug top 10 A with top cover necessary connections etc.. Complete with approved make.

Providing point wirring for street light with PVC unarmoured cable 1100 volts, grade ISI mark 3 core / 1.5 sq.mm. stranded/solid copper erected on wall with duly painted GI saddle @ 0.25 m c/c rigidly grouted in wall with the help of plate.

supplying and erecting 10-12 W, 230V integral type LED lamp

Supplying and erecting LED street light fitting suitable for 20 to 25W with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminiumalloy complete as per specification.

Supplying and errecting street light wall bracket made from 40 mm dia 'B' class GI pipe 1.2 m in total length complete as per specification.

Providing and erecting galvanized iron earth plate size 60x60x0.6 cm. complete with all materials, testing and recording the result as per specification.

Providing pipe type earthing with 40 mm dia GI pipe or 20 mm dia GI rod complete with all materials, testing and recording the result as per specification.

Supplying, erecting and making DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification.

Supplying, erecting and making SPMCB 6A to 32A, B- series (for Lighting) in provided distribution board as per specification.

Supplying and erecting GI sheet 1.6 mm ( 16 SWG ) to be used for fabrication of boxes panel boards etc.. Including cutting, bending, drilling, welding, riveting, etc..andpainting with one coat of red lead paint and two coat of enamel paint.8

Supplying and erecting marine plywood 18/19 mm thick fixed to wall or on provided panel board with nexessary materials such as screw, wall fasteners, support, nut bolts, etc.. Complete.

Supplying and erecting triple pole and neutral disribution board (TPNDB) surface/flush mounted suitable for SPMCB as per specification.

Supplying and erecting GI pipe 'A' class 25 mm dia erected for enclosing XLPE armoured cable on wall/pole as per specification

Supplying and erecting GI pipe 'A' class 40 mm dia erected for enclosing XLPE armoured cable on wall/pole as per specification

Supplying and laying (including excavation of suitable width and depth up to 90 cm.) 75 mm. outside dia double wall corrugated pipes (DWC) of HDPE for enclosing cable below groung/road surface, to required depth complete.

Supplying and erecting 18 guage M.S. box powder coated (4"x4") 3 way for mains connections.

Supplying and erecting Siemens type brass glands for 3 to 4 core 6 sq.mm. / 2 to 4 core 10 sq.mm. for XLPE armoured cable as per specification.

Supplyng shockproof type hand lamp with lamp holder, bulb/lamp 100 W guarded glass and 30 mts 3 core PVC flexible.

Point wirring for independent plug in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wire, flush tupe switch, earthing and required accessories as per specification.

Supplying and errecting street light wall bracket made from 25 mm dia 'B' class GI pipe 0.6 m in total length along with pole cap of 300 mm length and 0 mm. dia duly welded with provided leads complete as per specification.

Supplying and erecting mains with 2x2.5 sq.mm. stranded copper PVC insulated wire with 2x1.5 sq.mm. copper PVC wire in PVC casing - caping 20 mm on wall/ ceiling.

Supplying and erecting mains with 2x4.0 sq.mm. stranded copper PVC insulated wire with 2x1.5 sq.mm. copper PVC wire in PVC casing - caping 20 mm on wall/ ceiling.

Supplying and erecting double pole switch surface type/flush type 240V, 32A with indicator lamp and fuse as per specification.

Supplying and erecting double pole metal clad switch with HC type fuse and neutral link 240V, 32A with indicator as per specification.

Supplying and erecting 3W, 230 V integral type LED lamp suitable as per specification.

Supplying and erecting T8 Fluorescent day light tube suitable as per specification.

Supplying and erecting ready to use Retrofit T8 LED 18/20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete and compatible to T8 / T12 LED luminaire by disconnecting strarter and ballast if necessary

Supplying and erecting regular / standard model ceiling fan of 900/1050 mm sweep complete erected in position as per specifications.

Supplying and fixing wiremeshjali cover suitable for fitting / fan or for any purpose, complete with necessary materials. The jali cover shall be made from good quality GI wire mesh.

Supplying and erecting ding dong, electronic musical type call bell with heavy duty coil suitable to operate om 230V A.C. supply erected on polished double wooden block / sunmica block of suitable size.

Supplying and errecting street light wall bracket made from 25 mm dia 'B' class GI pipe 1.2 m complete as per specification.

Supplying and erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB/ FP MCB, erected on angle iron/GI frame complete.

Supplying erecting and markong four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board complete.

ROYALTY CHARGES

Murun

MATERIAL LAB TESTING

Cement 1.Cement Fineness 2.Standard Consistancy 3.Setting Time 4.Compressive Strength 5.Soundness 6. Specific Gravity

Concrete M-15 Grade M-10 Concrete cube compressive strengthb( Set of 3 cubes )

Concrete M-20 Grade M-20 Concrete cube compressive strengthb( Set of 3 cubes )

Crushed Metal for concrete Metal-Water absorption, specific gravity, Impact value, Crushing value.

Metal - Metal Gradation

TMT bars 1.Tensile Strength 2.Yield stress 3.Ultimate Tensile Stress 4. % Elongation 6. Bend/Rebend test

Sand -Sand - Fineness modulus, silt and clay content

Murum 1. Plasticity Index

2.Field Density

ESHS (Environment Safty and Health Management Labour Facilities (Lump- Sum Amount )

BEDASE PRAFFUL ARUNRAO

K. K. INFRASTRUCTURE