Supply and Installation, Testing, Commissioning of 500KVA (3 Nos.) D.G. Set Work at Government Medical College, Kannauj (U.P.)

Supply and Installation, Testing, Commissioning of 500KVA (3 Nos.) D.G. Set Work at Government Medical College, Kannaur (U.P.)

Supply of 500 KVA, CPCB IV+ compliant Three Phase, Prime duty Silent DG Set six Cylinder Liquid cooled comprising of Engine developing Minimum 594 BHP Electronic Fuel system and 500 KVA, 415 V, 50HZ, PF 0.8,voltage Regulation ±0.5% tested on 50 Degree C ambient Stamford make alternator mounted on a common base, complete with Fuel tank Minimum 760 Lts. Batteries and leads, Acoustic Enclosure, First fill of lube oil, Performance class ISO 8528-5 G2,H Class Insulation,Hospital Grade silence with Exhaust Treatment system as per CPCB 4 Compliant inside the canopy to meet Stringent emission standard Electronic Governing, Remote start stop, 4G compatible, Alert & warning, Isolated RS485G, Mod Bus interface (RS 485G RTU ), External Fuel Filling arrangement, 11 Pre Treatment process, DEF tank Provided with inlet and outlet connections

Supply of 500 KVA AMF Panel for each set & Synchronize panel common for all (one unit)

Supply & Erection of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entries Electrical control panel with TPN ACB(65 KA,4Pole Elect. draw out, Micro Processor Release IPR2) and TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, instrument fuses, current transformer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with detachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse. The Job includes the grouting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metie, current transformers and selector switches etc and instrument fuse. The switch board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A & B Only Incoming 630 Amp /415Volt ACB-1 No OUTGOING 100 Amp.MCCB-5 Nos., & 63 Amp.MCCB-INO Cat, B Pannel Cubicle Type

S/F and laying of HDPE pipes (upto Pn 6kg pressure Rating material Grade PE 80, Nominal Dia (OD) 160mm 9.1mm thicknes with cable below ground upto 1.50m to 2.00m By Drilling machine Complete in all respect as per relevants IS Technical Specification.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 400 Sqmm 3.5 core

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge. 400 Sqmm

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. (i) 240 Sqmm

(ii) 400 Sqmm

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.