PROVISION OF GYMNASIUM CLASS I AT NDA KHADAKWASLA

Amount

SCH 'A' PART-I: BUILDING/STRUCTURES Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only

Construction of Block of Gymnasium building Class-I complete all as shown on drawings and all as specified. Note: (i) Pile works (except Pile caps) of above building are not included in the lumpsum and shall be measured and paid separately under respective item Nos. 10.36 to 10.47 of Schedule 'A' Part-X of BOQ. However, steel reinforcement of piles embedded in Pile caps shall be included in the Lump sum quoted amount of above item. (ii) Wall Bars (wooden) thiugh shown in drawing, shall be out side the scope of above item and shall be measured and paid separately under respective items of Sch 'A' Part X.

NOTE: Schedule ‘A’ Part II to IX items have been Prepriced by MES and the Bidders shall insert their lumpsum cost in green field under Column-6 only.

Total amount of Sch 'A' Part-II (Internal Water Supply)

Total amount of Sch 'A' Part-III (Internal Electric Supply)

Total amount of Sch 'A' Part-IV (Road, Path and Culvert)

Total amount of Sch 'A' Part-V (Area Drainage )

Total amount of Sch 'A' Part-VI (Sewage Disposal)

Total amount of Sch 'A' Part-VII (External Water Supply)

Total amount of Sch 'A' Part-VIII (External Electric Supply)

Total amount of Sch 'A' Part-IX (Site Clearance, Excavation and Earthwork)

NOTE: Schedule ‘A’ Part II to IX items which are not Prepriced by MES are given in Sch 'A' Part-X, Bidders shall insert their rate in Column-6 only and the Estimated rate indicated as "0.0" are for that purpose.

SCHEDULE 'A' PART-X (MISC B/R , E/M , PT EQUIPMENT AND PILE FOUNDATION WORKS)

INTERNAL WATER SUPPLY

S&F Angular Stop cock 15 mm bore of pipe (16 mm outer dia) with wall flange, chromium plated stop valves all as per Cera Cat No. F8040204 or techno commercially equivalent model in makes as per Appendix 'C' all as specified and as directed.

S&F Central hole wash basin mixture for hot and cold water without popup waste system, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipes or for brass ferrule or CPVC pipe 15 mm bore/dia of pipe with 450 mm long braided hoses and fixed complete all as specified and directed.

S&F Two way bib cock with side handle, wall flange and aerator 16 mm dia all as per Cera - Titanium Model No F1003161 or techno commercially equivalent model in makes as mentioned in Appendix 'C' complete all as specified and as directed by Engineer-in-Charge. NOTE :- Flow of the fixture must be 3.0 litre per minute or less.

PT EQUIPMENTS

S&F Wall bars (wooden) four sections of size 3.6m x 2.7m height as detailed below:- (i) All Maple wood oval shaped rungs of 43 mm x 33mm fixed in Teak wood vertical members of 2.7m height x 150mm x 30mm thick. (ii) Wall bars are mounted on 2 nos cross supports of 100mm x 35mm wooden beam of sal wood duly treated with anti termite mounted with steel brackets and then fixed on the wall,complete all as specified and directed.

S&F Wall bars (wooden) two sections of size 1.8 m x 2.7 m height as detailed below:- (i) All Maple wood oval shaped rungs of 43 mm x 33mm fixed in Teak wood vertical members of 2.7m height x 150mm x 30mm thick. (ii) Wall bars are mounted on 2 nos cross supports of 100mm x 35mm wooden beam of sal wood duly treated with anti termite mounted with steel brackets and then fixed on the wall,complete all as specified and directed.

S&F Wall bars (wooden) one sections of size 0.8 m x 2.7 m height as detailed below:- (i) All Maple wood oval shaped rungs of 43 mm x 33mm fixed in Teak wood vertical members of 2.7m height x 150mm x 30mm thick. (ii) Wall bars are mounted on 2 nos cross supports of 100mm x 35mm wooden beam of sal wood duly treated with anti termite mounted with steel brackets and then fixed on the wall,complete all as specified and directed.

S&F Movable beam all as detailed below:- (i) There shall be 2 beam of 3.5m long x 150mm height x bullet profile beam for 3 cadets exercise simultaneously. (ii) These beams shall be height adjustable with counter weight and adjusted with nylon ropes overpullies. (iii) To fold the beams to the wall, the outer channel shall be fixed on a steel cantilever of C section and fixed with a roller. (iv) The cantilever shall work as a mono rail to fold the outer channel when not in use. (v) All teak wood 3m high box with steel frame including counter weight complete with bearing loaded steel pullies mounted on wall with the counter weight of the same weight as the beam so that the beam height adjustment can be done easily. (vi) All teak wood channel (C Section) shall be reinforced with aluminium plate through out the length of the channel. (vii) The channel shall be mounted on top with a steel bearing loaded roller of125 mm dia to roll over the steel cantilever. The steel flat cantilever of size 4 m length x 75mm x 15mm thick cold rolled flat shall be fixed on the wall at the height of 4m and the end shall be jointed with wire ropes and tensioners on the roof; complete all as specified and directed.

S&F Movable ropes (06 ropes each) all as detailed below:- (i) 6 ropes of 100-110mm circumferential rope 22 ft long. (ii) 6 m track with pullies /roller bearings and heavy duty made of jute ropes. Track should be strong to take the weight of 6 cadets.

INTERNAL ELECTRIFICATION

S&F BEE 5-star rated energy efficient ceiling fan of sweep size 1200 mm complete with blades, down rods and canopies, ZZ shielded double ball bearing, BLDC motor and remote control with separate remote including batteries/ cells as required, boost mode, timer & sleep mode to ensure air delivery of min 210 CMM having fan speed ≤ 350 RPM, energy consumption ≤ 28 W, service value ≥ 6.7, power factor ≥ 0.98 and suitable for input voltage 120-300 V, frequency 48-52 Hz, including making electrical connection with 3 core copper cable of suirable size, providing MS flat clamps in place of fan box for hanging fan on trusses/ girders where fan box is not feasible to fix etc. and other necessary accessories complete all as specified and directed.

S&F Energy efficient metallic heavy duty industrial wall fan of sweep 750 mm, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the connector of fan complete all as specified and directed. Make : Almonard 30 inch 750 mm air circulator, Havells: Turboforce wall 750 mm, Bajaj : Supreme plus air circulator 750 mm.

S&F Energy efficient metallic exhaust fan & louvers having blade sweep 300 mm, air delivery not less than 1700 Cubic Meter/ Hour, 1400 RPM, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the exhaust fan complete all as specified and directed. Make: Crompton Cat-Part No. EXHD300- 4-1 or equivalent model of Havells Cat-Part No. Ventil Air - DSP or BAJAJ Cat-Part No. Max Air.

S&F Vertical triple pole and neutral DB, 4 way, double door, metallic modular distribution board for conforming to IEC 61439-3, IP 43 protection, suitable for flush / surface mounting with provision for MCCB / MCBs as incomer and as outgoing, reversible metal door, fully insulated 200 Amps copper busbar for each phase, cable ties for cable management, prefitted masking sheet, earth bars, sticking saddles, cement spill protector, colour coded interconnected wire set, blanking plate and circuit identification lables, copper lugs and thimbles etc.; fixed on wall duly grouted in solid block wall complete all as specified and as directed. NOTE:- MCCB & MCBs shall be measured and paid separately.

S&F 20 Watt, 230 Volts surface / wall mounted and suspended LED tube light fittings with tube capable of delivering 2000 lumen, having PC diffuser, luminous efficacy of > 90 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input frequency 50 Hz, including electrical connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the fixture including suspension system (suspension system of suitable length at both ends of tube light fittings with locking arrangements) for hanging tube light fittings from truss/ roof/ ceiling whenever required at site complete all as specified and as directed.

S&F Surface mounted 2’ X 2’ panel fixture with integral fixed output driver having LED light source engine, luminous flux ≥ 100 Im/Watt, rated luminous efficacy ≥ 120Im/W, power consumption ≤ 40 W, power consumption tolerance ±10% , initial corrected colour temperature(CCT) 6500K , colour rendering index (CRI) ≥ 80, SDCM < 5, THD < 10% (at full load), power factor > 0.95, median useful life L70B50 @ Ta = 45 0C ≥ 50000 hrs, surge protection level ≥ 4 k V with CRCA housing and polystyrene glare free diffuser, IP20 & IK02 protection, EMI/EMC (B1) compliant, and suitable for 140-270 V input voltage, 50 Hz line frequency , ambient temperature range 0 to 45 0C, class B serviceability, along all necessary accessories including electrical connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and as directed.

S&F 10 Watt, 230 Volts, surface mounted 2 feet tube light fitting with extruded polycabonate housing and robust construction LED lighting with lumen output 1000 lumen, environmental friendly, energy efficient, CRI 6500K, PF not less than 0.95, fixed on PVC square box for mounting the fitting and electrical connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and as directed.

S&F LED High Bay light 120 Watt 230 V AC for industrial application with thermal management in multiple optics and equiped with IP 66 protection and impact and corrossion resistant complete with driver and lamp and electrical connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to fitting fixture including providing MS clamps of flat iron of min size 40 x 5 mm of suitable length in two pieces painted with two coats of synthetic enamel paint over one coat of red oxide paint, including nut bolts and washers for fixing the light fitting on trusses/ girders complete all as specified and as directed.

S&F 20 Watt street / security light fitting having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy having minimum luminous efficiency > 100 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high efficacy polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible copper conductor cable of appropriate size and 1.5 mtr long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete in all respects all as specified and as directed.

S&F Blank MCB plate complete all as specified and as directed.

Supply, installing and commissioning of Water cooler, electric driven, single phase AC 230 Volts 50 Hz, fully stainless steel body with two faucets of storage capacity 80 litres and cooling capacity 40 litres with connecting lead upto voltage stabilizer and 3 pin plug top, providing 1.0 kVA capacity voltage stabilizer for automatic operation, single phase naturally air cooled indoor type wall mounted & designed for input variation between 130 V to 300 V with output voltage stabilized at 230V with accuracy of +/- 2.5% complete all as specified and directed. Make:- Blue Star/ Voltas/ Usha

S & F MS extended down rod 12/15mm dia from roof/ceiling to fan for hanging ceiling fans cut to length required at site including making holes of suitable dia on both ends for fixing U Clamp including painting with two coats of synthetic enamel paint over one coat of red oxide primer on down rods to match with the fan color complete all as specified and directed by Engineer-in-Charge.

S&F LED light fitting 36 watt recess mounting of size 600mm x 600mm, white powder coated CRCA housing with LEDs, seamless front frame with flat white high transmission acrylic cover, classic design with glare free soft illumination, cool white, having lumen efficiency not less than 100 Lumen/watt, color temperature (CCT) 6500K, PF not less than 0.95, suitable for 140-270V input voltage, 50Hz line frequency, ambient temperature range 0 to 45 degree celcius, class B serviceability, alongwith all necessary accessories including making electric connection from source with PVC sheated copper conductor three core wire and fixing light in ceiling by providing all arrangement complete all as specified and directed by Engr-in-Charge.

ROAD, PATH & CULVERT

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instructions complete all as specified and as directed.

S&F Metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm hiehgt duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection embedding in and including PCC 1:2:4 type B-1 block of size 150 x 150 x 300 mm etc. complete all as specified and directed. Makes: Siddhi Vinayak Enterprises/ Road Safety Mark/ Dark Eye / Alaxius / 3M/ /Greenlite.

S&F Cat eye solar reflective type white / green / yellow of metal body and of size 100 mm x 100 mm x 20 mm with PAMA stripers reflector of model No. DA 972.0 fixed with and including MS studs of suitable size all as specified and directed. (Makes - Siddhi Vinayak Enterprises / Road Safety Mark / Dark Eye / Alaxius / 3M / Greenlite).

S&F Solar cat eye aluminium alloy of size 125 x 125 x 25 mm (shank 65 mm) of high efficiency mono rystafie solar panel 2.4 V / 0.3 Watt one Nied rechargable battery (1.2 V / 1600 MA) consisting of super bright LED with 10000 to 18000 mcd and shall be 100% water proof design according to IS complete all as specified and as directed. (Makes - Siddhi Vinayak Enterprises / Road Safety Mark / Dark Eye / Alaxius / 3M / Greenlite).

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensityencapsulated type heat activated retro reflective sheeting conforming totype - IV of ASTM-D 4956-01 in blue and silver white orother colour combination including subject mater, message (bilingua),symbols and borders etc. as per IRC;67:2001, pasted onsubstrate by an adhesive backing which shall be activated by applyingheat and pressure conforming to class -2 of ASTM-D.4956-01 andTIXing the same with suitable sized aluminium alloy rivets @ 20 cmclc to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos.M.S. angles of size 35x35x5 mm to a vertical post made up to M.S.Tee section ISMT 50x50x6 mm welded with base plate of size100x100x5 mm at the bottom end and including making holes inpipes, angles flats, providing & fixing M.S. message plate of required sIze, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-TeeSupport to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. all as per specification and directions of Engineer-in-charge.

EXTERNAL WATER SUPPLY

M&L Construction of Fly ash bricks masonry valve pit chamber of size 600 x 600 x 600 mm (depth) [internal dimensions] with 15 cm thick foundation using PCC 1:3:6 type C-2 over 15 cm thick hard core, built in 23 cm thick fly ash brick wall in cement and sand mortar 1:4, 15mm thick internal, top of walls and external plaster finished even and smooth without using extra cement; providing 4 mm thick MS sheet cover with 50mm x 50mm x 6mm MS angle iron frame fixed in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) coping with 25mm x 6mm flat iron hold fast with handle and locking arrangement including necessary painting steel surfaces with two coats of synthetic enamel paine over a coat of red oxide primer, excavation, earth work, returning & filling in type of soil and disposal of surplus soil at a distance of not exc. 50 m, complete all as specified.

M&L Cutting existing cast iron pipes and reducing to required length inclding S&F fittings such as tail piece, tees with necessary run lead joint including caucking, flanged joint , jointing materials like lead, rubber gasket, nuts bolts and washers complete for 100 mm bore of pipe complete all as specified and directed.

Supply, laying, jointing Special fittings one end flanged and the other end socket and bell mouth pieces one end flanged and other end tapering as bell mouth, DI bends, tapers, tees, pieces (single or double branch) any type and angle / radius and straight connecting pieces for ductile iron pipe 100 mm bore complete all as specified and as directed.

PILE FOUNDATION WORK

M&L Drilling into any type of soil strata including temporary casing lowering upto non-collapsible strata for 450 mm dia cast in situ piles all as required and getting out and disposal of spoil outside MD land and depositing at a place including erecting pilling equipment of any type complete with all accessories, centering in position and removing on completion of each pile all as shown on drawing, as specified and as directed.

M&L Drilling into Soft/disintegrated/weathered rock includijng temporary casing lowering upto non-collapsible strata for 450 mm dia cast in situ piles all as required and getting out and disposal of soft/ disintegrated/weathered rock outside MD land and depositing at a place including erecting pilling equipment of any type complete with all accessories centering in position and removing on completion of each pile all as shown on drawing, as specified and as directed

M&L Drilling into Hard rock including temporary casing lowering upto non-collapsible strata for 450 mm dia cast in situ piles all as required and getting out and disposal of hard rock outside MD land and depositing at a place including erecting pilling equipment of any type complete with all accessories centering in position and removing on completion of each pile all as shown on drawing, as specified and as directed

NOTES for Sr No 10.36 to 10.39 (a) Spoil shall be disposed off outside MD land. The unit rate quoted against item Nos 10.37 to 10.39 shall interralia be deemed to include for this operation and no extra payment shall be admissible on this account. (b) Drilling of piles shall be measured and paid from marked average ground level to bottom of pile. (c) Reinforcement required shall be measured and paid separately.

M&L RMC M-25 design mix concrete and Tremie Concreting as per IS 456 of 2000 in piles cast in situ and pile caps of 450 mm dia piles of any length /depth using tremie pipe concrete method including cutting and knocking down waste concrete complete all as shown on drawings, as specified and directed. Note: RCC will be measured and paid from cutoff level and rate quoted shall be inclusive of cutting and knocking of RCC waste above cut off level.

M&L Mild Steel TMT (Fe 500 D) with cover block, 10 mm dia & over, cut to length bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement of pile case and pile caps including lowering of pile cage into pile of 450 mm dia complete all as directed.

M&L Mild Steel TMT (Fe 500 D) 5mm dia and over upto and including 10mm dia in stirrups, spacers, binders, cut to length bent to shape required, including cranking, bending spirally for hoping for piles, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for reinforcement of pile case and pile caps complete all as directed.

M&L High Strength Dynamic Load Test using capwac analysis as per ASTM 4945 and IRC 78 on 450 mm dia piles in accordance with IS provisions for Initial Test including all necessary arrangements providing and setting up all necessary accessories and equipments carrying out the prescribed test as required/specified under the expert supervision, noting the result, taking out the accessories and equipment on completion of test, submitting the result in soft and hard copy quintuplicate all as directed.

M&L for Integrity Test on 450 mm dia pile in accordance with IS provisions including all necessary arrangements providing and setting up all necessary accessories and equipments carrying out the prescribed test as required/specified under the expert supervision noting the result, taking out the accessories and equipment on completion of test, submitting the result in soft and hard copy quintuplicate all as directed.

M&L for High Strength Dynamic Load Test using capwac analysis as per ASTM 4945 and IRC 78 on 450 mm dia pile in accordance with IS provisions for Routine Test including all necessary arrangements providing and setting up all necessary accessories and equipments carrying out the prescribed test as required/specified under the expert supervision noting the result, taking out the accessories and equipment on completion of test, submitting the result in soft and hard copy quintuplicate all as directed.

M&L High Strength Dynamic Load Test using capwac analysis as per ASTM 4945 and IRC 78 on 450 mm dia pile in accordance with IS provisions for Lateral Test including all necessary arrangements providing and setting up all necessary accessories and equipments carrying out the prescribed test as required/specified under the expert supervision noting the result, taking out the accessories and equipment on completion of test, submitting the result in soft and hard copy quintuplicate all as directed.

M/s L. K. Agarwal (BID ID -3156046)

M/S RAJ PATH INFRACON PVT LTD (BID ID -3155670)

SHREE KRISHNA INFRASTRUCTURE (BID ID -3155873)