Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹40.6 LAccepted-AOC CIVIL WORKS FOR CONSTRUCTION OF ADDITIONAL OFFICE BLOCK AT IOCL PUNJAB STATE OFFICE BUILDING PLOT NO 3A SECTOR 19 A CHANDIGARH UT | NA | NA | 160001 | 1 | Accepted-AOC Awardee | |
| 2 | 2₹50.2 L+₹9.5 L (23.4%)Rejected-Finance RGTPP KHEDAR HISAR HARYANA | HISAR | HARYANA | 125001 | 2 | Rejected-Finance Due to high rate than L1 | |
| 3 | 3₹53.6 L+₹13.0 L (32.0%)Rejected-Finance | 3 | Rejected-Finance Due to high rate than L1 | |
| 4 | 4₹56.1 L+₹15.5 L (38.1%)Rejected-Finance FLAT NO 3 NEW HOUSING BOARD COLONY BARNALA ROAD SIRSA 125055 | SIRSA | HARYANA | 125055 | 4 | Rejected-Finance Due to high rate than L1 |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
10 Jul 2024, 2:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Managing Director
Bays 21-22, Sahakarita Bhawan, Sector 2, Panchkula
Short Term Tender for Civil Electrical and miscellaneous works for brand outlet of VITA and HARHITH at Industrial Phase II Panchkula
2024_HBC_382992_2
HDDCF/PT/Tender/2024/2
Open Tender
Civil Works
Works
60 days
Panchklula
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
₹1 L
Yes
1 Aug 2024
1 Jul 2024
11 Jul 2024
1 Jul 2024
10 Jul 2024
1 Jul 2024
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:
Finishing walls with Acrylic Smooth exterior paint of required shade : Two or more coat applied @ 1.67 litre/1 O sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete
Scrapping of Old Paint with Sand Paper, Surface preparation.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 :3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
Providing and fixing white vitreous chinaware pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinaware flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Make - Jaquar/Cera/Hindware/Kohler/Equivalent Reputed Make.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White vitreous chinaware Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. Make - Jaquar/Cera/Hindware/Kohler/Equivalent Reputed Make.
Providing and fixing white vitreous chinaware pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Make - Jaquar/ Cera/ Hindware/ Kohler/ Equivalent Reputed Make.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia
Providing and fixing in position PVC Nahani/FLoor Trap conforming to I.S.I. specifications and of self cleaning design with C.P. brass grating with frame complete
Providing and fixing 8 mm dia C.P. I S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore
Providing and fixing PVC Heavy Duty & ISI marked pipe. Make - Finolex/Apollo/Supreme/D-plast/Astral. 75 mm dia
100 mm dia
Providing and fixing PVC Heavy Duty & ISI marked Bend. Make - Finolex/Apollo/Supreme/D-plast/Astral. 75 mm dia
100 mm dia
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing G.I. Tank nipple of required dia and making connection to the Wter storage tank including teflon tape/cost of thread.
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
Providing and fixing 600x120x5 mm glass shelf with edges round off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 160mm o/d SWR UPVC pipe lines laid complete
Providing and laying 80mm thick factory made cement concrete inter1ocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size)
1 : 1 ½: 3 ( 1 Cement: 1 ½ coarse sand (zone-Ill) : 3 graded stone aggregate 20 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level: 1 : 1 ½: 3 ( 1 Cement: 1 ½ coarse sand (zone-Ill) : 3 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect for all heights/ depths,etc.. Thermo-Mechanically Treated bars of grade Fe-500D
Providing and fixing PTMT Stop/Ball valve of approved Quality. 25 mm nominal bore
Grinding, Rubbing and polishing old/Existing Marble stone flooring complete upto the satisfaction of Engineer-in-charge.
Providing & Fixing Powder coated Aluminium Glazing in specified partitions/ventilator. The glazing to include section of frame 4" x 1.75" With toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) including all necessary hardware like hinges, stays, bolts, etc. The aluminium section to be of 16 guage.
Providing & Fixing Powder coated Aluminium Glazing in specified doors. The glazing to include section of frame 4" x 1.75" and that of door shutter be 3" x 1.5" and With toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) including all necessary hardware like hinges, stays, bolts, etc. The aluminium section to be of 16 guage.
Providing & Fixing Powder coated Aluminium Glazing in specified Windows. The glazing to include section of frame 2.25" x 1.5" and that of door shutter be 1.75" x 1.5" and With toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) including all necessary hardware like hinges, stays, bolts, etc. The aluminium section to be of 16 guage.
Providing and fixing water cooler of storage capacity 80 ltr. With 2 taps and referigerant R-134a, minimum cooling capacity 40 ltrs/hr The prefilter set of 3 nos candles to be provided and fixed. The items including all necessary accessaries and fittings to install the water cooler. Make- Voltas/BlueStar/Reputed make as approved by Engineer-in-Charge.
Extra for copper pipe (suction and discharge combined) fixed more than 3 mtrs for 1.5 & 2 ton Air Conditioners including insulation cover.
Providing and fixing 5 kVA copper winded stabilizer with working range of 90 V-300V having display showing input/output voltage with all accessories.
Providing and fixing 4 kVA copper winded stabilizer with working range of 90 V-300V having display showing input/output voltage with all accessories.
Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 1:6 Cement Mortar
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar.
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charg eNominal concrete 1: 1.5:3 or richer mix.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sq. metres and below
Of area beyond 3 sq. metres
12 mm cement plaster of mix : 1 :4 (1 cement: 4 fine sand)
15 mm cement plaster on the rough side of single or half brick wall of mix : 1 :4 (1 cement: 4 fine sand)
Supply of earth including loading, transportation, unloading and filling in 15 cm layers including spreading, ramming, watering consolidation and cost of earth brought at any distance in all aspects including Lead. Consolidated Earth is to be measured.
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing, fixing, installing and commissioning of 2 Ton with minimum 3 star rating of BEE Air Conditioners (Split Type) of fixed speed type compressor (non inverter), complete with Indoor Unit (IDU), Outdoor Unit (ODU),surface/ concealed copper Refrigerant piping with insulation (EP foam pipe section) upto 3 mtrs IDU to ODU), copper cable upto 3 mtr. (IDU to ODU), R-32/R-410 refrigerant, PVC drain pipe (dia 15 mm) upto 3 mtr., remote, ODU stand, with all accessories provided by brand manufacturer complete in all aspects. The condensor coil shall be of copper with blue/golden fins. Warranty given as per Brand Manufacturer. Make - Voltas/ Lloyd/ Hitachi/ Blue Star/ Samsung / L.G./ Carrier/ Daikin/ Mitsubishi/ O-General/ Equivalent reputed make as approved by Engineer-in-charge.
Providing, fixing, installing and commissioning of 1.5 Ton with minimum 3 star rating of BEE Air Conditioners (Split Type) of fixed speed type compressor (non inverter), complete with Indoor Unit (IDU), Outdoor Unit (ODU),surface/ concealed copper Refrigerant piping with insulation (EP foam pipe section) upto 3 mtrs IDU to ODU), copper cable upto 3 mtr. (IDU to ODU), R-32/R-410 refrigerant, PVC drain pipe (dia 15 mm) upto 3 mtr., remote, ODU stand, with all accessories provided by brand manufacturer complete in all aspects. The condensor coil shall be of copper with blue/golden fins. Warranty given as per Brand Manufacturer. Make - Voltas/ Lloyd/ Hitachi/ Blue Star/ Samsung / L.G./ Carrier/ Daikin/ Mitsubishi/ O-General/ Equivalent reputed make as approved by Engineer-in-charge.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
Providing and fixing pair of Stainless steel door handle (450 mm long , 2nos) and one stainless steel glass door lock having chromium polish for 12 mm thick toughened glass doors alongwith screws and necessary fittings complete.
Removing of existing Rolling Shutter, its repairing, Reifixing, oiling and greasing.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes
20 mm nominal outer dia Pipes
25 mm nominal outer dia Pipes
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group B
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. 3 x1.5 sq. mm
3 x4 sq. mm
3 x6 sq. mm
1 x1.5 sq. mm
5 x 6 sq. mm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used)
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
S&F of two module stepped electronics modular regulator in the existing modular sheet including connections but excluding modular sheet etc as required.
Supply and fixing of following size / modules GI box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)
3 Module (100mmX75mm)
4 Module (125mmX75mm)
6 Module (200mmX75mm)
8 Module
12 Module
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch
2 way 5/6 amps switch
15/16 amp switch
3 pin 5/6 amp socket outlet
6 pin 15/16 amp socket outlet
Telephone socket outlet
TV antenna socket outlet
Bell push
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts 10KA "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required). 6 way (4 + 24), Double door
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 8 way , Double door
12 way , Double door
S&F SP MCB 5 to 32 Amp suitable for 240/415 volts C series 10 KA MCB suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. Single Pole
63 A, Single pole.
Supplying, errection, testing of Exhaust fan (as per IS code 374) having a each capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge.
Supplying and fixing 3 pin, 5 amp ceiling rose, 3 plate, on the existing junction box/ wooden block including connection etc as required.
Supplying and fixing PVC batten/ angle holder on the existing junction box/ wooden block including connection etc as required.
Supplying and drawing following pair 0.5 sq mm FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair
S & D of co axial TV cable RG 6 grade 0.7 sq mm solid copper conductor PE insulated shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel / PVC conduit as required including tap connectors as required.
Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge
Supply, Installation, Testing and Commissioning of 900 mm sweep ceiling fan , class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete with Suspension rod as required at site.
Supplying and Installation of krone box 10 pair etc as required.
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.150 A, 16 KA,TPMCCB
Supplying and fixing of 4 feet LED Batten 18/20 watt having minimum system efficacy of 100 lm/w and minimum useful life of 50000 Hours.
Supplying and fixing of 2 feet LED Batten 10 watt having minimum system efficacy of 100 lm/Watt and minimum useful life of 50000 Hours.
Supplying and fixing of decorative light compatible with 9 watt Pin type LED lamps.
Supplying and fixing of 12 watt surface down lighter having minimum system efficacy of 100 lm/w and minimum useful life of 50000 Hours.
Supplying and fixing of LED mirror light
Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including each 3772 accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.
Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode.
Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required.
SITC of high performance street light luminaire of minimum 25 watt having luminous efficacy of 100 lumen/watt complet with frame/ G.I bracket etc. as required at sit. The fixture should be IP 66 and voltage surge protected.
40 amp to 63 amp. Double pole
40 amp to 63 amp. MCB's TRIPLE POLE
Call bell 220/230 volts musical type
Dismantling old wiring points ( surface wiring system ) including necessary repairs to wall etc. Light, fan or call bell Point including circuit/sub main wiring.
Wall socket point including circuit/submain wiring
Dismantling old wiring points ( Recess wiring or partly recess partly surface system , recess Conduit and box not to be dismanUed ) including necessary repairs to wall etc. Light, fan or call bell Point including circuit/sub main wiring.
Wall socket point including circuit/submain wiring
Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job.
Kitchen sink without drain board. 610x510 mm bowl depth 200 mm
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .